國立高雄大學圖資館 |

登入

回首頁

Adhesion of polymer/inorganic interfaces :Effects of filler addition, environment and chemistry.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Adhesion of polymer/inorganic interfaces :
其他題名:	Effects of filler addition, environment and chemistry.
作者:	Wang, Lorraine Chia-Lei.
面頁冊數:	131 p.
附註:	Adviser: Reinhold H. Dauskardt.
附註:	Source: Dissertation Abstracts International, Volume: 64-09, Section: B, page: 4571.
Contained By:	Dissertation Abstracts International64-09B.
標題:	Engineering, Materials Science.
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3104173
ISBN:	0496517414

Adhesion of polymer/inorganic interfaces :Effects of filler addition, environment and chemistry.
Wang, Lorraine Chia-Lei.

Adhesion of polymer/inorganic interfaces :Effects of filler addition, environment and chemistry. [electronic resource] - 131 p.

Adviser: Reinhold H. Dauskardt.

Thesis (Ph.D.)--Stanford University, 2003.

A fracture mechanics approach was used to study the adhesion of SiN x to two silica-filled model underfills based on either a cycloaliphatic or bisphenol F epoxy. The influence of filler content and distribution on critical adhesion and debond path selection was examined. As the filler content increased, the elastic particles constrained the plastic deformation in the epoxy, causing the critical adhesion of the underfill/SiNx interface to decrease. For the bisphenol F system, however, this embrittling effect was countered by weak adhesion between the epoxy matrix and the silica, resulting in microcrack toughening and higher interfacial adhesion values. At high filler contents, the dense concentration of microcracks directed the debond away from the interface and into the underfill layer.

ISBN: 0496517414Subjects--Topical Terms:

226940
Engineering, Materials Science.

Adhesion of polymer/inorganic interfaces :Effects of filler addition, environment and chemistry.
LDR:03267nmm _2200277 _450 001 162154
005 20051017073416.5
008 230606s2003 eng d
020 $a 0496517414
035 $a 00148655
035 $a 162154
040 $a UnM $c UnM
100 0 $a Wang, Lorraine Chia-Lei. $3 227270
245 1 0 $a Adhesion of polymer/inorganic interfaces : $b Effects of filler addition, environment and chemistry. $h [electronic resource]
300 $a 131 p.
500 $a Adviser: Reinhold H. Dauskardt.
500 $a Source: Dissertation Abstracts International, Volume: 64-09, Section: B, page: 4571.
502 $a Thesis (Ph.D.)--Stanford University, 2003.
520 # $a A fracture mechanics approach was used to study the adhesion of SiN x to two silica-filled model underfills based on either a cycloaliphatic or bisphenol F epoxy. The influence of filler content and distribution on critical adhesion and debond path selection was examined. As the filler content increased, the elastic particles constrained the plastic deformation in the epoxy, causing the critical adhesion of the underfill/SiNx interface to decrease. For the bisphenol F system, however, this embrittling effect was countered by weak adhesion between the epoxy matrix and the silica, resulting in microcrack toughening and higher interfacial adhesion values. At high filler contents, the dense concentration of microcracks directed the debond away from the interface and into the underfill layer.
520 # $a Miniaturization of microelectronic devices is increasingly limited by the ability to mechanically and electrically connect the chip to the substrate. Structures required for high-density packaging must be fabricated with layer thicknesses and feature sizes approaching micron size scales. Second phase inorganic particles are often added to the underfill epoxy that surrounds a ball grid array (BGA) to achieve the mechanical and thermal properties necessary to protect the electrical solder connections. These filler additions cause a variation in mechanical properties throughout the underfill layer and introduce a distribution of potentially weak interfaces, both of which can affect the behavior of the underfill/passivation interface and overall reliability of the package during thermal cycling of the device.
520 # $a Over the lifetime of the device, interfaces are susceptible to moisture-assisted debonding, progressive debond growth at loads well below the critical interface fracture energies. This effect is often seen for interface systems such as aliphatic/SiNx and is similar to the stress corrosion behavior observed for bulk glasses. The bisphenol F/SiNx interface surprisingly only exhibited subcritical debond growth at extremely low growth rates. This low growth rate behavior was examined with respect to variations in temperature and humidity as well as changes in the epoxy and interface chemistry. Potential mechanisms are proposed.
590 $a School code: 0212.
650 # 0 $a Engineering, Materials Science. $3 226940
710 0 # $a Stanford University. $3 212607
773 0 # $g 64-09B. $t Dissertation Abstracts International
790 $a 0212
790 1 0 $a Dauskardt, Reinhold H., $e advisor
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://libsw.nuk.edu.tw/login?url=http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3104173 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3104173