國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Fatigue damage evolution study with ...

Lee, Tae-Kyu.

Fatigue damage evolution study with non-destructive magnetic properties measurement method using scanning SQUID microscopy.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Fatigue damage evolution study with non-destructive magnetic properties measurement method using scanning SQUID microscopy.
作者:	Lee, Tae-Kyu.
面頁冊數:	164 p.
附註:	Chair: John W. Morris, Jr.
附註:	Source: Dissertation Abstracts International, Volume: 66-08, Section: B, page: 4433.
Contained By:	Dissertation Abstracts International66-08B.
標題:	Engineering, Materials Science.
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3187086
ISBN:	9780542289620

Fatigue damage evolution study with non-destructive magnetic properties measurement method using scanning SQUID microscopy.
Lee, Tae-Kyu.

Fatigue damage evolution study with non-destructive magnetic properties measurement method using scanning SQUID microscopy. - 164 p.

Chair: John W. Morris, Jr.

Thesis (Ph.D.)--University of California, Berkeley, 2005.

In this study, a non-destructive evaluation method is established by continuously measuring the magnetic properties, which interact with the developing fatigue damage during cyclic loading. Dislocations and microcracks which are initiated during the fatigue act as pinning sites which impede the motion of magnetic domain walls under the applied magnetic field, thereby influencing the bulk magnetic properties. The remanence field of various fatigued steel specimens are detected using a scanning microscope based on a high transition temperature Superconducting Quantum Interference Device (SQUID). The results show the development of localized peaks in remanent magnetization prior to the formation of visible fatigue cracks. Even in the second stage of fatigue, where the macroscopic state of the sample is relatively constant, the results show that a scanning SQUID microscope is capable of detecting regions of fatigue damage both on surface and in sub-surface regions.

ISBN: 9780542289620Subjects--Topical Terms:

226940
Engineering, Materials Science.

Fatigue damage evolution study with non-destructive magnetic properties measurement method using scanning SQUID microscopy.
LDR:02857nmm _2200289 _450 001 170811
005 20061228142252.5
008 090528s2005 eng d
020 $a 9780542289620
035 $a 00242841
040 $a UnM $c UnM
100 0 $a Lee, Tae-Kyu. $3 244842
245 1 0 $a Fatigue damage evolution study with non-destructive magnetic properties measurement method using scanning SQUID microscopy.
300 $a 164 p.
500 $a Chair: John W. Morris, Jr.
500 $a Source: Dissertation Abstracts International, Volume: 66-08, Section: B, page: 4433.
502 $a Thesis (Ph.D.)--University of California, Berkeley, 2005.
520 # $a In this study, a non-destructive evaluation method is established by continuously measuring the magnetic properties, which interact with the developing fatigue damage during cyclic loading. Dislocations and microcracks which are initiated during the fatigue act as pinning sites which impede the motion of magnetic domain walls under the applied magnetic field, thereby influencing the bulk magnetic properties. The remanence field of various fatigued steel specimens are detected using a scanning microscope based on a high transition temperature Superconducting Quantum Interference Device (SQUID). The results show the development of localized peaks in remanent magnetization prior to the formation of visible fatigue cracks. Even in the second stage of fatigue, where the macroscopic state of the sample is relatively constant, the results show that a scanning SQUID microscope is capable of detecting regions of fatigue damage both on surface and in sub-surface regions.
520 # $a The fatigue process can be precisely defined in the crack propagation stage, where the fatigue damage can be evaluated by observed cracks and where an increase of the dislocation density occurs at the first 10% of the fatigue life. But for the stages between dislocation saturation and prior to nucleation, no definition can be given due to the relative difficulty in quantifying the damage. Especially, detecting a high-cycle fatigue damage is a particularly important yet an unsolved problem in non-destructive testing. There are no reliable techniques to measure the progress of fatigue in the intermediate fatigue regime, the second stage of fatigue, where the overall dislocation density is approximately constant and the microstructural changes are subtle include about 80% of the fatigue life in high-cycle fatigue.
590 $a School code: 0028.
650 # 0 $a Engineering, Materials Science. $3 226940
650 # 0 $a Physics, Condensed Matter. $3 226939
650 # 0 $a Engineering, Metallurgy. $3 227093
690 $a 0611
690 $a 0743
690 $a 0794
710 0 # $a University of California, Berkeley. $3 212474
773 0 # $g 66-08B. $t Dissertation Abstracts International
790 $a 0028
790 1 0 $a Morris, John W., Jr., $e advisor
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://libsw.nuk.edu.tw:81/login?url=http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3187086 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3187086