國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

數位影像相關係數法於微觀鑽孔法應用之研究 = Application o...

吳宛錚

數位影像相關係數法於微觀鑽孔法應用之研究 = Application of the digital image correlation method to the micro Hole-Drilling method

紀錄類型:	書目-語言資料,印刷品 : 單行本
並列題名:	Application of the digital image correlation method to the micro Hole-Drilling method
作者:	吳宛錚,
其他團體作者:	國立高雄大學
出版地:	[高雄市]
出版者:	撰者;
出版年:	民99[2010]
面頁冊數:	108面圖，表 : 30公分;
標題:	數位影像相關係數法
標題:	digital image correlation method
電子資源:	http://handle.ncl.edu.tw/11296/ndltd/13364886172776413126
摘要註:	結構物或是機械零件在製作加工時，常因高溫鍛造等行為而造成殘餘應力。殘餘應力會影響構件原本可承受之強度或是使用年限，因此量測殘餘應力對結構物與機械的使用安全性是相當重要的。ASTM-E837-01規範中所述之鑽孔法為一半破壞性檢測技術，其方法為在鑽孔周圍貼上應變計來量取鑽至不同深度之表面應變。隨著鑽孔直徑的減小，試體受到的破壞會也跟著減少，使得此方法愈來愈接近非破壞性檢測。但是當鑽孔尺寸過小時，應變計無法遵守ASTM規範貼在鑽孔周圍的規定，故無法使用應變計進行應變的量測。數位影像相關係數法(DIC)為一非接觸式且多尺度的量測技術，其原理為比對試體變形前後之影像灰階關係來得到位移及應變場。因此本研究將不同鑽孔階段的影像拍攝下來，利用DIC法與未鑽孔前之試體影像做比對，以探討在DIC輔助下以鑽孔法進行非破壞檢測之可行性。實驗結果顯示，量測所得之應變值與ASTM 規範中之經驗值在數值大小與趨勢上均吻合，反算所得之應力與所施加之應力大小及方向亦相當接近，表示DIC能夠成功的應用在微觀的鑽孔法中，以進行非破壞檢測來求得試體之殘餘應力。 After the components of structure or machinery are processed, the proceeding such as high-temperature forging might generate the residual stress. Residual stress will reduce the strength or service life of component; hence, the measurement of residual stress is important to ensure the safety of structure and machinery.The Hole-Drilling method described in ASTM-E837-01 is a semi-destructive measurement method, strain gauges are attached around the hole to measure the surface strain in various drilling depth. With the decreasing of diameter, the destruction degree is reduced; smaller hole makes the method more like non-destructive testing.However, if the drilling hole is too small, the strain gauge can not be attached around the hole to comply with ASTM standard, therefore the strain can not be measured by strain gauge. DIC is a non-contact and multi-scale measurement method, it compares the gray-scale of image before and after deformation to obtain the displacement and strain field.Hence, to assess the feasibility of hole-drilling for implementing the non-destructive testing assisted by DIC method, the images of specimen in different drilling states are taken, and applied DIC method to compare the these images with the image captured before drilling.The result shows that the trend and value of measured strain is fit with the theory value given in ASTM and the determined residual stresses and direction are close to the theory value, it means that the DIC method can be applied in the micro-scale hole-drilling method to determine the residual stresses of specimen.

數位影像相關係數法於微觀鑽孔法應用之研究 = Application of the digital image correlation method to the micro Hole-Drilling method
吳, 宛錚

數位影像相關係數法於微觀鑽孔法應用之研究 = Application of the digital image correlation method to the micro Hole-Drilling method / 吳宛錚撰 - [高雄市] : 撰者, 民99[2010]. - 108面 ; 圖，表 ; 30公分.
參考書目：面.
數位影像相關係數法digital image correlation method

數位影像相關係數法於微觀鑽孔法應用之研究 = Application of the digital image correlation method to the micro Hole-Drilling method
LDR:04077nam0a2200277 450 001 272796
005 20170214100608.0
009 272796
010 0 $b 精裝
010 0 $b 平裝
100 $a 20170214y2010 k y0chiy05 e
101 1 $a chi $d chi $d eng
102 $a tw
105 $a ak am 000yy
200 1 $a 數位影像相關係數法於微觀鑽孔法應用之研究 $d Application of the digital image correlation method to the micro Hole-Drilling method $f 吳宛錚撰
210 $a [高雄市] $c 撰者 $d 民99[2010]
215 0 $a 108面 $c 圖，表 $d 30公分
314 $a 指導教授：童士恆博士
320 $a 參考書目：面
328 $a 碩士論文--國立高雄大學土木與環境工程學系碩士班
330 $a 結構物或是機械零件在製作加工時，常因高溫鍛造等行為而造成殘餘應力。殘餘應力會影響構件原本可承受之強度或是使用年限，因此量測殘餘應力對結構物與機械的使用安全性是相當重要的。ASTM-E837-01規範中所述之鑽孔法為一半破壞性檢測技術，其方法為在鑽孔周圍貼上應變計來量取鑽至不同深度之表面應變。隨著鑽孔直徑的減小，試體受到的破壞會也跟著減少，使得此方法愈來愈接近非破壞性檢測。但是當鑽孔尺寸過小時，應變計無法遵守ASTM規範貼在鑽孔周圍的規定，故無法使用應變計進行應變的量測。數位影像相關係數法(DIC)為一非接觸式且多尺度的量測技術，其原理為比對試體變形前後之影像灰階關係來得到位移及應變場。因此本研究將不同鑽孔階段的影像拍攝下來，利用DIC法與未鑽孔前之試體影像做比對，以探討在DIC輔助下以鑽孔法進行非破壞檢測之可行性。實驗結果顯示，量測所得之應變值與ASTM 規範中之經驗值在數值大小與趨勢上均吻合，反算所得之應力與所施加之應力大小及方向亦相當接近，表示DIC能夠成功的應用在微觀的鑽孔法中，以進行非破壞檢測來求得試體之殘餘應力。 After the components of structure or machinery are processed, the proceeding such as high-temperature forging might generate the residual stress. Residual stress will reduce the strength or service life of component; hence, the measurement of residual stress is important to ensure the safety of structure and machinery.The Hole-Drilling method described in ASTM-E837-01 is a semi-destructive measurement method, strain gauges are attached around the hole to measure the surface strain in various drilling depth. With the decreasing of diameter, the destruction degree is reduced; smaller hole makes the method more like non-destructive testing.However, if the drilling hole is too small, the strain gauge can not be attached around the hole to comply with ASTM standard, therefore the strain can not be measured by strain gauge. DIC is a non-contact and multi-scale measurement method, it compares the gray-scale of image before and after deformation to obtain the displacement and strain field.Hence, to assess the feasibility of hole-drilling for implementing the non-destructive testing assisted by DIC method, the images of specimen in different drilling states are taken, and applied DIC method to compare the these images with the image captured before drilling.The result shows that the trend and value of measured strain is fit with the theory value given in ASTM and the determined residual stresses and direction are close to the theory value, it means that the DIC method can be applied in the micro-scale hole-drilling method to determine the residual stresses of specimen.
510 1 $a Application of the digital image correlation method to the micro Hole-Drilling method
610 0 $a 數位影像相關係數法 $a 鑽孔法 $a 殘餘應力
610 1 $a digital image correlation method $a Hole-Drilling method $a residual stress
681 $a 008M/0019 $b 541606 2638 $v 2007年版
700 1 $a 吳 $b 宛錚 $4 撰 $3 482964
712 0 2 $a 國立高雄大學 $b 土木與環境工程學系碩士班 $3 166007
801 0 $a tw $b 國立高雄大學 $c 20101227 $g CCR
856 7 $z 電子資源 $2 http $u http://handle.ncl.edu.tw/11296/ndltd/13364886172776413126