國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Microstructure-property optimization...

Sarac, Baran.

Microstructure-property optimization in metallic Glasses

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Microstructure-property optimization in metallic Glassesby Baran Sarac.
作者:	Sarac, Baran.
出版者:	Cham :Springer International Publishing :2015.
面頁冊數:	xiii, 89 p. :ill., digital ;24 cm.
Contained By:	Springer eBooks
標題:	Metallic glasses.
電子資源:	http://dx.doi.org/10.1007/978-3-319-13033-0
ISBN:	9783319130330 (electronic bk.)

Microstructure-property optimization in metallic Glasses
Sarac, Baran.

Microstructure-property optimization in metallic Glasses[electronic resource] /by Baran Sarac. - Cham :Springer International Publishing :2015. - xiii, 89 p. :ill., digital ;24 cm. - Springer theses,2190-5053. - Springer theses..

General Introduction -- Fabrication Methods of MG Artificial Microstructures -- Structural Characterization of Metallic Glasses -- Artificial Microstructure Approach -- General Conclusions and Outlook.

This thesis consists of an in-depth study of investigating microstructure-property relationships in bulk metallic glasses using a novel quantitative approach by which influence of the second phase features on mechanical properties can be independently and systematically analyzed. The author evaluates and optimizes the elastic and plastic deformation, as well as the overall toughness of cellular honeycombs under in-plane compression and porous heterostructures under uniaxial tension. The study reveals three major deformation zones in cellular metallic glass structures, where deformation changes from collective buckling showing non-linear elasticity to localized failure exhibiting a brittle-like deformation, and finally to global sudden failure with negligible plasticity as the length to thickness ratio of the ligaments increases. The author found that spacing and size of the pores, the pore configuration within the matrix, and the overall width of the sample determines the extent of deformation, where the optimized values are attained for pore diameter to spacing ratio of one with AB type pore stacking.

ISBN: 9783319130330 (electronic bk.)

Standard No.: 10.1007/978-3-319-13033-0doiSubjects--Topical Terms:

225461
Metallic glasses.

LC Class. No.: TN693.M4

Dewey Class. No.: 620.16

Microstructure-property optimization in metallic Glasses
LDR:02337nmm a2200337 a 4500 001 462485
003 DE-He213
005 20151016145318.0
006 m d
007 cr nn 008maaau
008 151119s2015 gw s 0 eng d
020 $a 9783319130330 (electronic bk.)
020 $a 9783319130323 (paper)
024 7 $a 10.1007/978-3-319-13033-0 $2 doi
035 $a 978-3-319-13033-0
040 $a GP $c GP
041 0 $a eng
050 4 $a TN693.M4
072 7 $a TDM $2 bicssc
072 7 $a TEC021000 $2 bisacsh
072 7 $a TEC023000 $2 bisacsh
082 0 4 $a 620.16 $2 23
090 $a TN693.M4 $b S243 2015
100 1 $a Sarac, Baran. $3 715485
245 1 0 $a Microstructure-property optimization in metallic Glasses $h [electronic resource] / $c by Baran Sarac.
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2015.
300 $a xiii, 89 p. : $b ill., digital ; $c 24 cm.
490 1 $a Springer theses, $x 2190-5053
505 0 $a General Introduction -- Fabrication Methods of MG Artificial Microstructures -- Structural Characterization of Metallic Glasses -- Artificial Microstructure Approach -- General Conclusions and Outlook.
520 $a This thesis consists of an in-depth study of investigating microstructure-property relationships in bulk metallic glasses using a novel quantitative approach by which influence of the second phase features on mechanical properties can be independently and systematically analyzed. The author evaluates and optimizes the elastic and plastic deformation, as well as the overall toughness of cellular honeycombs under in-plane compression and porous heterostructures under uniaxial tension. The study reveals three major deformation zones in cellular metallic glass structures, where deformation changes from collective buckling showing non-linear elasticity to localized failure exhibiting a brittle-like deformation, and finally to global sudden failure with negligible plasticity as the length to thickness ratio of the ligaments increases. The author found that spacing and size of the pores, the pore configuration within the matrix, and the overall width of the sample determines the extent of deformation, where the optimized values are attained for pore diameter to spacing ratio of one with AB type pore stacking.
650 0 $a Metallic glasses. $3 225461
650 1 4 $a Materials Science. $3 273697
650 2 4 $a Metallic Materials. $3 274455
650 2 4 $a Nanotechnology and Microengineering. $3 348421
650 2 4 $a Nanoscale Science and Technology. $3 489389
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer eBooks
830 0 $a Springer theses. $3 557607
856 4 0 $u http://dx.doi.org/10.1007/978-3-319-13033-0
950 $a Chemistry and Materials Science (Springer-11644)