國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

A piezoelectric electrospun platform...

Beringer, Laura Toth.

A piezoelectric electrospun platform for in situ cardiomyocyte contraction analysis.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	A piezoelectric electrospun platform for in situ cardiomyocyte contraction analysis.
作者:	Beringer, Laura Toth.
面頁冊數:	285 p.
附註:	Source: Dissertation Abstracts International, Volume: 76-08(E), Section: B.
附註:	Adviser: Caroline L. Schauer.
Contained By:	Dissertation Abstracts International76-08B(E).
標題:	Materials science.
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3687906
ISBN:	9781321659016

A piezoelectric electrospun platform for in situ cardiomyocyte contraction analysis.
Beringer, Laura Toth.

A piezoelectric electrospun platform for in situ cardiomyocyte contraction analysis. - 285 p.

Source: Dissertation Abstracts International, Volume: 76-08(E), Section: B.

Thesis (Ph.D.)--Drexel University, 2015.

Flexible, self-powered materials are in demand for a multitude of applications such as energy harvesting, robotic devices, and lab-on-a chip medical diagnostics. Lab-on-a-chip materials or cell-based biosensors can provide new diagnostic or therapeutic tools for numerous diseases. This dissertation explores the fabrication and characterization of a cell-based sensor termed a nanogenerator with three major aims.

ISBN: 9781321659016Subjects--Topical Terms:

221779
Materials science.

A piezoelectric electrospun platform for in situ cardiomyocyte contraction analysis.
LDR:04348nmm a2200337 4500 001 476058
005 20160418090146.5
008 160517s2015 ||||||||||||||||| ||eng d
020 $a 9781321659016
035 $a (MiAaPQ)AAI3687906
035 $a AAI3687906
040 $a MiAaPQ $c MiAaPQ
100 1 $a Beringer, Laura Toth. $3 730313
245 1 2 $a A piezoelectric electrospun platform for in situ cardiomyocyte contraction analysis.
300 $a 285 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-08(E), Section: B.
500 $a Adviser: Caroline L. Schauer.
502 $a Thesis (Ph.D.)--Drexel University, 2015.
520 $a Flexible, self-powered materials are in demand for a multitude of applications such as energy harvesting, robotic devices, and lab-on-a chip medical diagnostics. Lab-on-a-chip materials or cell-based biosensors can provide new diagnostic or therapeutic tools for numerous diseases. This dissertation explores the fabrication and characterization of a cell-based sensor termed a nanogenerator with three major aims.
520 $a The first aim of this research was to fabricate a piezoelectric material that could act as both a cell scaffold and sensor and characterize the response to cell-scale deformation. Electrospinning piezoelectric fluoropolymers into nanofibers can provide both of these functionalities in a facile method. PVDF-TrFe was electrospun in an aligned format and interfaced with a flexible plastic substrate in order to create a platform for voltage response characterization after small force cantilever deformations. Voltage peak signals were an average of +/- 0.4 V, and this response did not change after platform sterilization. However, when placed in cell culture media, piezoelectric response was dampened, which was taken into consideration for the next two aims.
520 $a An aligned electrospun coaxial fiber system of PVDF-TrFe and collagen was created and interfaced with the nanogenerator for the second aim in order to provide a more biologically favorable surface for cells to adhere to. These nanogenerators were successfully characterized for their piezoelectric response, which was an average of +/- 0.1 V. Additionally, the aligned coaxial collagen/PVDF-TrFe fibers supported both neuron and HeLa cell attachment and growth, demonstrating that they were not cytotoxic. To assess the potential for the nanogenerators to be used as a contractile analysis lab-on-a-chip based device, HeLa cell contraction was induced with potassium chloride and signal response was analyzed. The nanogenerator system was able to detect both the resting state of HeLa cells, a contraction state, and a hyperpolarized state, proving their potential use as contractile analysis microdevices.
520 $a The third and final aim of this dissertation was to be able to measure contraction events from both cultured cardiomyocytes and whole tissues in situ. Rat neonatal cardiomyocytes grew on the prepared collagen/PVDF-TrFe nanogenerators and yielded a distinct signal after 8 days of growth. These contractions were verified with live cell imaging and video recording. In addition, cardiomyocyte exposure to the drug isoproterenol increased contraction strength and frequency, which was reflected in the nanogenerator recordings. Frog whole heart and heart tissue slices also were interfaced with the fabricated nanogenerators and signals were recorded. The same held true for heart slices from male Sprague-Dawley rats. These signals were determined to be statistically different compared to the control baseline nanogenerator recordings in media in the absence of cell culture.
520 $a Overall the fabricated nanogenerators have demonstrated their potential to be used as in situ analysis tools for contractile events and have potential in the field of personalized medicine and drug diagnostic assays. The facile fabrication and ease of setup to obtain the electrical voltage signal corresponding to the contractile events are what sets the nanogenerator apart from any polymer based sensor available today.
590 $a School code: 0065.
650 4 $a Materials science. $3 221779
650 4 $a Biomedical engineering. $3 190330
650 4 $a Nanotechnology. $3 193873
690 $a 0794
690 $a 0541
690 $a 0652
710 2 $a Drexel University. $b Materials Science and Engineering. $3 730314
773 0 $t Dissertation Abstracts International $g 76-08B(E).
790 $a 0065
791 $a Ph.D.
792 $a 2015
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3687906