國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

IIW guidelines on weld quality in re...

Jonsson, Bertil.

IIW guidelines on weld quality in relationship to fatigue strength

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	IIW guidelines on weld quality in relationship to fatigue strengthby Bertil Jonsson ... [et al.].
其他作者:	Jonsson, Bertil.
出版者:	Cham :Springer International Publishing :2016.
面頁冊數:	xiii, 115 p. :ill., digital ;24 cm.
Contained By:	Springer eBooks
標題:	Welded jointsTesting.
電子資源:	http://dx.doi.org/10.1007/978-3-319-19198-0
ISBN:	9783319191980$q(electronic bk.)

IIW guidelines on weld quality in relationship to fatigue strength
IIW guidelines on weld quality in relationship to fatigue strength[electronic resource] /by Bertil Jonsson ... [et al.]. - Cham :Springer International Publishing :2016. - xiii, 115 p. :ill., digital ;24 cm. - IIW collection,2365-435X. - IIW collection..

Introduction -- Design for Purpose -- iiw Fatigue Assessment Procedures -- Classification of Weld Imperfections and Features -- Weld Quality Levels for Fatigue Loaded Structures -- Root Side Requirements -- Inspection, Quality Control and Documentation -- Fitness for Service.

This book presents guidelines on quantitative and qualitative measures of the geometric features and imperfections of welds to ensure that it meets the fatigue strength requirements laid out in the recommendations of the IIW (International Institute of Welding) Welds that satisfy these quality criteria can be assessed in accordance with existing IIW recommendations based on nominal stress, structural stress, notch stress or linear fracture mechanics. Further, the book defines more restrictive acceptance criteria based on weld geometry features and imperfections with increased fatigue strength. Fatigue strength for these welds is defined as S-N curves expressed in terms of nominal applied stress or hot spot stress. Where appropriate, reference is made to existing quality systems for welds. In addition to the acceptance criteria and fatigue assessment curves, the book also provides guidance on their inspection and quality control. The successful implementation of these methods depends on adequate training for operators and inspectors alike. As such, the publication of the present IIW Recommendations is intended to encourage the production of appropriate training aids and guidelines for educating, training and certifying operators and inspectors.

ISBN: 9783319191980$q(electronic bk.)

Standard No.: 10.1007/978-3-319-19198-0doiSubjects--Topical Terms:

683123
Welded joints
--Testing.

LC Class. No.: TA492.W4

Dewey Class. No.: 671.52

IIW guidelines on weld quality in relationship to fatigue strength
LDR:02564nmm a2200337 a 4500 001 486645
003 DE-He213
005 20160930141631.0
006 m d
007 cr nn 008maaau
008 161116s2016 gw s 0 eng d
020 $a 9783319191980$q(electronic bk.)
020 $a 9783319191973$q(paper)
024 7 $a 10.1007/978-3-319-19198-0 $2 doi
035 $a 978-3-319-19198-0
040 $a GP $c GP
041 0 $a eng
050 4 $a TA492.W4
072 7 $a TGXW $2 bicssc
072 7 $a TEC040000 $2 bisacsh
072 7 $a TEC020000 $2 bisacsh
082 0 4 $a 671.52 $2 23
090 $a TA492.W4 $b I25 2016
245 0 0 $a IIW guidelines on weld quality in relationship to fatigue strength $h [electronic resource] / $c by Bertil Jonsson ... [et al.].
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2016.
300 $a xiii, 115 p. : $b ill., digital ; $c 24 cm.
490 1 $a IIW collection, $x 2365-435X
505 0 $a Introduction -- Design for Purpose -- iiw Fatigue Assessment Procedures -- Classification of Weld Imperfections and Features -- Weld Quality Levels for Fatigue Loaded Structures -- Root Side Requirements -- Inspection, Quality Control and Documentation -- Fitness for Service.
520 $a This book presents guidelines on quantitative and qualitative measures of the geometric features and imperfections of welds to ensure that it meets the fatigue strength requirements laid out in the recommendations of the IIW (International Institute of Welding) Welds that satisfy these quality criteria can be assessed in accordance with existing IIW recommendations based on nominal stress, structural stress, notch stress or linear fracture mechanics. Further, the book defines more restrictive acceptance criteria based on weld geometry features and imperfections with increased fatigue strength. Fatigue strength for these welds is defined as S-N curves expressed in terms of nominal applied stress or hot spot stress. Where appropriate, reference is made to existing quality systems for welds. In addition to the acceptance criteria and fatigue assessment curves, the book also provides guidance on their inspection and quality control. The successful implementation of these methods depends on adequate training for operators and inspectors alike. As such, the publication of the present IIW Recommendations is intended to encourage the production of appropriate training aids and guidelines for educating, training and certifying operators and inspectors.
650 0 $a Welded joints $x Testing. $3 683123
650 0 $a Welded steel structures $x Testing. $3 744715
650 0 $a Building, Iron and steel $x Joints $x Testing. $3 744716
650 1 4 $a Engineering. $3 210888
650 2 4 $a Operating Procedures, Materials Treatment. $3 274456
650 2 4 $a Metallic Materials. $3 274455
650 2 4 $a Theoretical and Applied Mechanics. $3 274501
700 1 $a Jonsson, Bertil. $3 744714
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer eBooks
830 0 $a IIW collection. $3 739034
856 4 0 $u http://dx.doi.org/10.1007/978-3-319-19198-0
950 $a Engineering (Springer-11647)