國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Characterization of a Low-Cost Milli...

Chiu, John.

Characterization of a Low-Cost Millinewton Force Sensor for Ionic Polymer Metal Composite Actuators.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Characterization of a Low-Cost Millinewton Force Sensor for Ionic Polymer Metal Composite Actuators.
作者:	Chiu, John.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, 2016
面頁冊數:	108 p.
附註:	Source: Masters Abstracts International, Volume: 55-05.
附註:	Adviser: Kathleen A. Lamkin-Kennard.
Contained By:	Masters Abstracts International55-05(E).
標題:	Mechanical engineering.
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10117706
ISBN:	9781339790800

Characterization of a Low-Cost Millinewton Force Sensor for Ionic Polymer Metal Composite Actuators.
Chiu, John.

Characterization of a Low-Cost Millinewton Force Sensor for Ionic Polymer Metal Composite Actuators. - Ann Arbor : ProQuest Dissertations & Theses, 2016 - 108 p.

Source: Masters Abstracts International, Volume: 55-05.

Thesis (M.E.)--Rochester Institute of Technology, 2016.

Ionic polymer-metal composites (IPMCs) have become an area of interest in the past decade for their unique properties as actuators. Conventional IPMCs require the use of rare earth metals for electrodes making the fabrication of these materials expensive, time consuming to produce, and not suitable for large scale manufacturing. Due to the low actuational forces, in the millinewton scale, characterization of IPMCs is costly and often requires expensive force sensors and data acquisition (DAQ) systems. This thesis explores the capabilities of a low cost, two dimensional millinewton force sensor fabricated out of nitinol #1 wire and orthogonally mounted strain gauge pairs in half bridge configurations. An Arduino microcontroller based DAQ system and a modular test stand were developed to facilitate calibration of the force sensor and testing of IPMCs. The overall system cost, approximately

ISBN: 9781339790800Subjects--Topical Terms:

190348
Mechanical engineering.

Characterization of a Low-Cost Millinewton Force Sensor for Ionic Polymer Metal Composite Actuators.
LDR:02563nmm a2200301 4500 001 502065
005 20170619070722.5
008 170818s2016 ||||||||||||||||| ||eng d
020 $a 9781339790800
035 $a (MiAaPQ)AAI10117706
035 $a AAI10117706
040 $a MiAaPQ $c MiAaPQ
100 1 $a Chiu, John. $3 766038
245 1 0 $a Characterization of a Low-Cost Millinewton Force Sensor for Ionic Polymer Metal Composite Actuators.
260 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2016
300 $a 108 p.
500 $a Source: Masters Abstracts International, Volume: 55-05.
500 $a Adviser: Kathleen A. Lamkin-Kennard.
502 $a Thesis (M.E.)--Rochester Institute of Technology, 2016.
520 $a Ionic polymer-metal composites (IPMCs) have become an area of interest in the past decade for their unique properties as actuators. Conventional IPMCs require the use of rare earth metals for electrodes making the fabrication of these materials expensive, time consuming to produce, and not suitable for large scale manufacturing. Due to the low actuational forces, in the millinewton scale, characterization of IPMCs is costly and often requires expensive force sensors and data acquisition (DAQ) systems. This thesis explores the capabilities of a low cost, two dimensional millinewton force sensor fabricated out of nitinol #1 wire and orthogonally mounted strain gauge pairs in half bridge configurations. An Arduino microcontroller based DAQ system and a modular test stand were developed to facilitate calibration of the force sensor and testing of IPMCs. The overall system cost, approximately $2 00 USD, was able to achieve a force resolution of 0.49 mN. Calibration of the force sensor was accomplished gravimetrically and the data was processed in an Arduino-LabVIEW(TM) interface. An ionic polymer-carbon composite (IPCC) fabrication concept was also developed that utilizes buckypaper (BP) electrodes, electrospun nanofibrous Nafion mats, and EMI-Tf ionic liquid for hydration. The IPCC concept has the potential to achieve faster actuation rates, larger deflections, and longer operations in air compared to IPMCs. The IPCC fabrication process developed takes a fraction of the time compared to conventional IPMC fabrication and can be applied to IPMC fabrication for production on an industrial scale.
590 $a School code: 0465.
650 4 $a Mechanical engineering. $3 190348
650 4 $a Materials science. $3 221779
650 4 $a Robotics. $3 181952
690 $a 0548
690 $a 0794
690 $a 0771
710 2 $a Rochester Institute of Technology. $b Mechanical Engineering. $3 766039
773 0 $t Masters Abstracts International $g 55-05(E).
790 $a 0465
791 $a M.E.
792 $a 2016
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10117706