國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

A quasi-dimensional SI burn rate mod...

Hann, Sebastian.

A quasi-dimensional SI burn rate model for carbon-neutral fuels

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	A quasi-dimensional SI burn rate model for carbon-neutral fuelsby Sebastian Hann.
作者:	Hann, Sebastian.
出版者:	Wiesbaden :Springer Fachmedien Wiesbaden :2021.
面頁冊數:	xxxiv, 163 p. :ill., digital ;24 cm.
Contained By:	Springer Nature eBook
標題:	Internal combustion enginesCombustion
電子資源:	https://doi.org/10.1007/978-3-658-33232-7
ISBN:	9783658332327$q(electronic bk.)

A quasi-dimensional SI burn rate model for carbon-neutral fuels
Hann, Sebastian.

A quasi-dimensional SI burn rate model for carbon-neutral fuels[electronic resource] /by Sebastian Hann. - Wiesbaden :Springer Fachmedien Wiesbaden :2021. - xxxiv, 163 p. :ill., digital ;24 cm. - Wissenschaftliche Reihe Fahrzeugtechnik Universitat Stuttgart,2567-0042. - Wissenschaftliche Reihe Fahrzeugtechnik Universitat Stuttgart..

Fuel Influence on Flame Wrinkling -- Laminar Flame Speed Model -- Burn Rate Model Improvement -- Engine Knock Investigation and Modeling.

Sebastian Hann describes the development of a quasi-dimensional burn rate model that enables the prediction of a fuel variation, without the need for a recalibration of the model. The model is valid for spark-ignition combustion engines powered by conventional and carbon-neutral fuels. Its high predictive ability was achieved by modeling the fuel-dependent laminar flame speed based on reaction kinetics calculations. In addition, the author discards a fuel influence on flame wrinkling by performing an engine measurement data analysis. He investigates the fuel influence on engine knock and models it via ignition delay times obtained from reaction kinetics calculations. Contents Fuel Influence on Flame Wrinkling Laminar Flame Speed Model Burn Rate Model Improvement Engine Knock Investigation and Modeling Target Groups Scientists and students in the field of automotive engineering, esp. thermodynamics and 0D/1D engine simulation Calculation and development engineers in industry working in the field of thermodynamics, esp. combustion engine development About the Author Sebastian Hann works as a research assistant in the field of 0D/1D simulation at the Institute of Automotive Engineering, University of Stuttgart. He dealt with the investigation and modeling of the fuel influence on spark-ignition engine combustion and engine knock. In addition to conventional fuels, he also considered carbon-neutral fuels.

ISBN: 9783658332327$q(electronic bk.)

Standard No.: 10.1007/978-3-658-33232-7doiSubjects--Topical Terms:

836330
Internal combustion engines
--Combustion

LC Class. No.: TJ756

Dewey Class. No.: 621.43

A quasi-dimensional SI burn rate model for carbon-neutral fuels
LDR:02648nmm a2200349 a 4500 001 600427
003 DE-He213
005 20210520152837.0
006 m d
007 cr nn 008maaau
008 211104s2021 gw s 0 eng d
020 $a 9783658332327$q(electronic bk.)
020 $a 9783658332310$q(paper)
024 7 $a 10.1007/978-3-658-33232-7 $2 doi
035 $a 978-3-658-33232-7
040 $a GP $c GP
041 0 $a eng
050 4 $a TJ756
072 7 $a TRC $2 bicssc
072 7 $a TEC009090 $2 bisacsh
072 7 $a TRC $2 thema
072 7 $a TRCS $2 thema
082 0 4 $a 621.43 $2 23
090 $a TJ756 $b .H243 2021
100 1 $a Hann, Sebastian. $3 894977
245 1 2 $a A quasi-dimensional SI burn rate model for carbon-neutral fuels $h [electronic resource] / $c by Sebastian Hann.
260 $a Wiesbaden : $b Springer Fachmedien Wiesbaden : $b Imprint: Springer Vieweg, $c 2021.
300 $a xxxiv, 163 p. : $b ill., digital ; $c 24 cm.
490 1 $a Wissenschaftliche Reihe Fahrzeugtechnik Universitat Stuttgart, $x 2567-0042
505 0 $a Fuel Influence on Flame Wrinkling -- Laminar Flame Speed Model -- Burn Rate Model Improvement -- Engine Knock Investigation and Modeling.
520 $a Sebastian Hann describes the development of a quasi-dimensional burn rate model that enables the prediction of a fuel variation, without the need for a recalibration of the model. The model is valid for spark-ignition combustion engines powered by conventional and carbon-neutral fuels. Its high predictive ability was achieved by modeling the fuel-dependent laminar flame speed based on reaction kinetics calculations. In addition, the author discards a fuel influence on flame wrinkling by performing an engine measurement data analysis. He investigates the fuel influence on engine knock and models it via ignition delay times obtained from reaction kinetics calculations. Contents Fuel Influence on Flame Wrinkling Laminar Flame Speed Model Burn Rate Model Improvement Engine Knock Investigation and Modeling Target Groups Scientists and students in the field of automotive engineering, esp. thermodynamics and 0D/1D engine simulation Calculation and development engineers in industry working in the field of thermodynamics, esp. combustion engine development About the Author Sebastian Hann works as a research assistant in the field of 0D/1D simulation at the Institute of Automotive Engineering, University of Stuttgart. He dealt with the investigation and modeling of the fuel influence on spark-ignition engine combustion and engine knock. In addition to conventional fuels, he also considered carbon-neutral fuels.
650 0 $a Internal combustion engines $x Combustion $x Testing. $3 836330
650 0 $a Internal combustion engines $x Energy consumption. $3 894978
650 1 4 $a Automotive Engineering. $3 308930
650 2 4 $a Engine Technology. $3 601259
650 2 4 $a Simulation and Modeling. $3 273719
650 2 4 $a Engineering Thermodynamics, Heat and Mass Transfer. $3 338996
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer Nature eBook
830 0 $a Wissenschaftliche Reihe Fahrzeugtechnik Universitat Stuttgart. $3 747695
856 4 0 $u https://doi.org/10.1007/978-3-658-33232-7
950 $a Engineering (SpringerNature-11647)