國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁 到查詢結果 [ subject:"Packet transport networks." ]

切換: 標籤 | MARC模式 | ISBD

Network convergenceEthernet applicat...

Joseph, Vinod.

Network convergenceEthernet applications and next generation packet transport architectures /

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Network convergenceVinod Joseph and Srinivas Mulugu.
其他題名:	Ethernet applications and next generation packet transport architectures /
作者:	Joseph, Vinod.
其他作者:	Mulugu, Srinivas.
出版者:	Boston :Morgan Kaufmann,c2014.
面頁冊數:	ix, 585 p. :ill. ;24 cm.
標題:	Ethernet (Local area network system)
電子資源:	http://www.sciencedirect.com/science/book/9780123978776
ISBN:	9780123978776 (electronic bk.)

Network convergenceEthernet applications and next generation packet transport architectures /
Joseph, Vinod.

Network convergenceEthernet applications and next generation packet transport architectures /[electronic resource] :Vinod Joseph and Srinivas Mulugu. - Boston :Morgan Kaufmann,c2014. - ix, 585 p. :ill. ;24 cm.

Includes bibliographical references and index.

"Before we get into VPLS, let us take a quick look at MPLS Layer 2 VPNs also referred to as Point-Point services. A point-to-point L2VPN circuit, as defined by the PWE3 working group, is a provider service that offers a point-to-point service infrastructure over an IP/MPLS packet switched network. The PWE3 working group of the IETF describes mechanisms on how to deliver L2 VPN services across a packet switches IP/MPLS network. The basic reference model is outlined in the picture below. A pseudo-wire (PW) is a connection between two provider edge (PE) devices, which connects two attachment circuits (ACs). An AC can be a Frame Relay DLCI, an ATM VPI/VCI, an Ethernet port, a VLAN, a HDLC, a PPP connection on a physical interface, a PPP session from an L2TP tunnel, an MPLS LSP, etc. During the setup of a PW, the two PE routers will be configured or will automatically exchange information about the service to be emulated so that later they know how to process packets coming from the other end. The PE routers use Targeted LDP sessions for setting the PW. After a PW is set up between two PE routers, frames received by one PE from an AC are encapsulated and sent over the PW to the remote PE, where native frames are re-constructed and forwarded to the other CE"--

ISBN: 9780123978776 (electronic bk.)

LCCN: 2013025197Subjects--Topical Terms:

183307
Ethernet (Local area network system)

LC Class. No.: TK5105.383 / .J68 2014

Dewey Class. No.: 004.6

Network convergenceEthernet applications and next generation packet transport architectures /
LDR:02076cmm a2200229 a 4500 001 449874
005 20140701154441.0
008 150513s2014 maua sb 001 0 eng
010 $a 2013025197
020 $a 9780123978776 (electronic bk.)
020 $a 9780123978776
035 $a 14000354
040 $a DLC $c DLC $d DLC
041 0 $a eng
042 $a pcc
050 0 0 $a TK5105.383 $b .J68 2014
082 0 0 $a 004.6 $2 23
100 1 $a Joseph, Vinod. $3 454332
245 1 0 $a Network convergence $h [electronic resource] : $b Ethernet applications and next generation packet transport architectures / $c Vinod Joseph and Srinivas Mulugu.
260 $a Boston : $b Morgan Kaufmann, $c c2014.
300 $a ix, 585 p. : $b ill. ; $c 24 cm.
504 $a Includes bibliographical references and index.
520 $a "Before we get into VPLS, let us take a quick look at MPLS Layer 2 VPNs also referred to as Point-Point services. A point-to-point L2VPN circuit, as defined by the PWE3 working group, is a provider service that offers a point-to-point service infrastructure over an IP/MPLS packet switched network. The PWE3 working group of the IETF describes mechanisms on how to deliver L2 VPN services across a packet switches IP/MPLS network. The basic reference model is outlined in the picture below. A pseudo-wire (PW) is a connection between two provider edge (PE) devices, which connects two attachment circuits (ACs). An AC can be a Frame Relay DLCI, an ATM VPI/VCI, an Ethernet port, a VLAN, a HDLC, a PPP connection on a physical interface, a PPP session from an L2TP tunnel, an MPLS LSP, etc. During the setup of a PW, the two PE routers will be configured or will automatically exchange information about the service to be emulated so that later they know how to process packets coming from the other end. The PE routers use Targeted LDP sessions for setting the PW. After a PW is set up between two PE routers, frames received by one PE from an AC are encapsulated and sent over the PW to the remote PE, where native frames are re-constructed and forwarded to the other CE"-- $c Provided by publisher.
650 0 $a Ethernet (Local area network system) $3 183307
650 0 $a Packet transport networks. $3 667643
650 0 $a Computer network architectures. $3 197806
650 0 $a Convergence (Telecommunication) $3 226625
650 0 $a Internetworking (Telecommunication) $3 181936
700 1 $a Mulugu, Srinivas. $3 646648
856 4 0 $u http://www.sciencedirect.com/science/book/9780123978776