國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁 到查詢結果 [ subject:"Gearing" ]

切換: 標籤 | MARC模式 | ISBD

New approaches to gear design and pr...

Barmina, Natalya.

New approaches to gear design and production

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	New approaches to gear design and productionedited by Veniamin Goldfarb, Evgenii Trubachev, Natalya Barmina.
其他作者:	Goldfarb, Veniamin.
出版者:	Cham :Springer International Publishing :2020.
面頁冊數:	xiii, 529 p. :ill., digital ;24 cm.
Contained By:	Springer eBooks
標題:	GearingDesign.
電子資源:	https://doi.org/10.1007/978-3-030-34945-5
ISBN:	9783030349455$q(electronic bk.)

New approaches to gear design and production
New approaches to gear design and production[electronic resource] /edited by Veniamin Goldfarb, Evgenii Trubachev, Natalya Barmina. - Cham :Springer International Publishing :2020. - xiii, 529 p. :ill., digital ;24 cm. - Mechanisms and machine science,v.812211-0984 ;. - Mechanisms and machine science ;v.2..

Foreword by Marco Ceccarelli -- Preface -- Introduction -- Advanced computer-aided gear design, analysis and manufacturing -- Tooth contact analysis of cylindrical gears reconstructed from point clouds -- Simulation of the teeth profile shaping during the finishing of gears -- Tooth surface stress and flash temperature analysis with trochoid interference of gears -- Computer-aided techniques versus analytical methods for tooth gear calculations -- Optimization of planocentric gear train characteristics with CA tools -- Biplanetary gear trains and their analysis through the torque method -- Curvature interference characteristic of ZC1 worm gear -- Engineering assessment of load-carrying capacity and tribotechnical parameters of spur gears with account of tooth profile correction and variation of sliding friction factor in gearing -- Approaches to computer-aided design of spur and helical gear production processes with account of patterns for generation and variation of quality parameters of gears at their production -- Aspects of the kinematic theory of spatial transformations of rotations: analytic and software synthesis of kinematic pitch configurations -- Engineering design of gears with involute-bevel gearwheels via application of additive techniques -- Chapter with no title yet -- Design analysis of geometry of bevel gearwheels made by stamping method -- Features of designing the power elements of drives with high load-carrying capacity -- Analysis and prospects of application of bevel gears with variable gear ratio in foldable antenna mechanisms -- Vibration monitoring of mechanisms and aggregates with broadband spectrum of vibration -- Features of parameter selection for worm gears with steel gearwheels -- New geometry and geometric and kinematic parameters of gears and machine-tool gearing: concepts, terminology and development of the theory of kinematic generation of surfaces -- Capabilities of computer-aided design of worm-type gears by means of "SPDIAL+" software -- New approach to computer-aided design of gearbox systems: models and algorithms -- Numerical simulation of elastic and plastic contact of heavy-loaded spiroid gears -- Possibilities of cutting bevel gearwheel teeth by hobs -- Simulation of gears and gear trains within the MMS study course -- New approach to computer-aided design of gearbox systems: conception and development of information support.

This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.

ISBN: 9783030349455$q(electronic bk.)

Standard No.: 10.1007/978-3-030-34945-5doiSubjects--Topical Terms:

860874
Gearing
--Design.

LC Class. No.: TJ184 / .N493 2020

Dewey Class. No.: 621.833

New approaches to gear design and production
LDR:04035nmm a2200337 a 4500 001 573543
003 DE-He213
005 20200620112546.0
006 m d
007 cr nn 008maaau
008 200928s2020 sz s 0 eng d
020 $a 9783030349455$q(electronic bk.)
020 $a 9783030349448$q(paper)
024 7 $a 10.1007/978-3-030-34945-5 $2 doi
035 $a 978-3-030-34945-5
040 $a GP $c GP
041 0 $a eng
050 4 $a TJ184 $b .N493 2020
072 7 $a TGB $2 bicssc
072 7 $a TEC009070 $2 bisacsh
072 7 $a TGB $2 thema
082 0 4 $a 621.833 $2 23
090 $a TJ184 $b .N532 2020
245 0 0 $a New approaches to gear design and production $h [electronic resource] / $c edited by Veniamin Goldfarb, Evgenii Trubachev, Natalya Barmina.
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2020.
300 $a xiii, 529 p. : $b ill., digital ; $c 24 cm.
490 1 $a Mechanisms and machine science, $x 2211-0984 ; $v v.81
505 0 $a Foreword by Marco Ceccarelli -- Preface -- Introduction -- Advanced computer-aided gear design, analysis and manufacturing -- Tooth contact analysis of cylindrical gears reconstructed from point clouds -- Simulation of the teeth profile shaping during the finishing of gears -- Tooth surface stress and flash temperature analysis with trochoid interference of gears -- Computer-aided techniques versus analytical methods for tooth gear calculations -- Optimization of planocentric gear train characteristics with CA tools -- Biplanetary gear trains and their analysis through the torque method -- Curvature interference characteristic of ZC1 worm gear -- Engineering assessment of load-carrying capacity and tribotechnical parameters of spur gears with account of tooth profile correction and variation of sliding friction factor in gearing -- Approaches to computer-aided design of spur and helical gear production processes with account of patterns for generation and variation of quality parameters of gears at their production -- Aspects of the kinematic theory of spatial transformations of rotations: analytic and software synthesis of kinematic pitch configurations -- Engineering design of gears with involute-bevel gearwheels via application of additive techniques -- Chapter with no title yet -- Design analysis of geometry of bevel gearwheels made by stamping method -- Features of designing the power elements of drives with high load-carrying capacity -- Analysis and prospects of application of bevel gears with variable gear ratio in foldable antenna mechanisms -- Vibration monitoring of mechanisms and aggregates with broadband spectrum of vibration -- Features of parameter selection for worm gears with steel gearwheels -- New geometry and geometric and kinematic parameters of gears and machine-tool gearing: concepts, terminology and development of the theory of kinematic generation of surfaces -- Capabilities of computer-aided design of worm-type gears by means of "SPDIAL+" software -- New approach to computer-aided design of gearbox systems: models and algorithms -- Numerical simulation of elastic and plastic contact of heavy-loaded spiroid gears -- Possibilities of cutting bevel gearwheel teeth by hobs -- Simulation of gears and gear trains within the MMS study course -- New approach to computer-aided design of gearbox systems: conception and development of information support.
520 $a This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.
650 0 $a Gearing $x Design. $3 860874
650 0 $a Gearing $x Manufacture. $3 860877
650 1 4 $a Mechanical Engineering. $3 273894
650 2 4 $a Industrial and Production Engineering. $3 273753
650 2 4 $a Software Engineering/Programming and Operating Systems. $3 273711
650 2 4 $a Computer-Aided Engineering (CAD, CAE) and Design. $3 274500
700 1 $a Goldfarb, Veniamin. $3 736867
700 1 $a Trubachev, Evgenii. $3 799489
700 1 $a Barmina, Natalya. $3 736868
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer eBooks
830 0 $a Mechanisms and machine science ; $v v.2. $3 558595
856 4 0 $u https://doi.org/10.1007/978-3-030-34945-5
950 $a Engineering (Springer-11647)