Computer-Aided Engineering (CAD, CAE) and Design.

Production Planning in Production Networks :Models for Medium and Short-term Planning / by: (Electronic resources)

Field Models in Electricity and Magnetism by: (Electronic resources)

Systemverilog for verificationa guide to learning the testbench language features / by: (Electronic resources)

Product engineeringtools and methods based on virtual reality / by: (Electronic resources)

Computational Intelligence for Modelling and Prediction by: (Electronic resources)

Classification and Clustering for Knowledge Discovery by: (Electronic resources)

Design for Manufacturability and Yield for Nano-Scale CMOS by: (Electronic resources)

A Practical Introduction to PSL by: (Electronic resources)

Design Computing and Cognition '06 by: (Electronic resources)

Visualization of Digital Terrain and Landscape DataA Manual / by: (Electronic resources)

Innovation in Life Cycle Engineering and Sustainable Development by: (Electronic resources)

Reuse-Based Methodologies and Tools in the Design of Analog and Mixed-Signal Integrated Circuits by: (Electronic resources)

The Structure of Paintings by: (Electronic resources)

Large-Scale Scientific Computing5th International Conference, LSSC 2005, Sozopol, Bulgaria, June 6-10, 2005, Revised Papers / by: (Electronic resources)

Computer Supported Cooperative Work in Design II9th International Conference, CSCWD 2005, Coventry, UK, May 24-26, 2005, Revised Selected Papers / by: (Electronic resources)

Intelligent Computing in Engineering and Architecture13th EG-ICE Workshop 2006, Ascona, Switzerland, June 25-30, 2006, Revised Selected Papers / by: (Electronic resources)

Embedded System Design by: (Electronic resources)

CMOS Active Inductors and TransformersPrinciple, Implementation, and Applications / by: (Electronic resources)

Systems Modeling and Simulation: Theory and ApplicationsThird Asian Simulation Conference, AsiaSim 2004, Jeju Island, Korea, October 4-6, 2004, Revised Selected Papers / by: (Electronic resources)

Holonic and Multi-Agent Systems for ManufacturingSecond International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2005, Copenhagen, Denmark, August 22-24, 2005, Proceedings / by: (Electronic resources)

Evolvable Systems :From Biology to Hardware: 6th International Conference, ICES 2005, Sitges, Spain, September 12-14, 2005, Proceedings by: (Electronic resources)

Computer Aided Systems Theory - EUROCAST 2005 :10th International Conference on Computer Aided Systems Theory, Las Palmas de Gran Canaria, Spain, February 7-11, 2005, Revised Selected Papers by: (Electronic resources)

Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation :15th International Workshop, PATMOS 2005, Leuven, Belgium, September 21-23, 2005, Proceedings by: (Electronic resources)

Correct Hardware Design and Verification Methods :13th IFIP WG 10.5Advanced Research, Working Conference, CHARME 2005, Saarbrucken, Germany, October 3-6, 2005, Proceedings by: (Electronic resources)

Computer Supported Cooperative Work in Design I :8th International Conference, CSCWD 2004, Xiamen, China, May 26-28, 2004. Revised Selected Papers by: (Electronic resources)

Computer-Aided Innovation (CAI)IFIP 20th World Computer Congress, Proceedings of the Second Topical Session on Computer-Aided Innovation, WG 5.4/TC 5 Computer-Aided Innovation, September 7-10, 2008, Milano, Italy / by: (Electronic resources)

An Introduction to Computer Graphics and Creative 3-D Environments by: (Electronic resources)

Introduction to Geometric Computing by: (Electronic resources)

Smart Graphics9th International Symposium, SG 2008, Rennes, France, August 27-29, 2008. Proceedings / by: (Electronic resources)

Global Design to Gain a Competitive EdgeAn Holistic and Collaborative Design Approach based on Computational Tools / by: (Electronic resources)

Advanced Design and Manufacture to Gain a Competitive EdgeNew Manufacturing Techniques and their Role in Improving Enterprise Performance / by: (Electronic resources)

Evolvable systemsfrom biology to hardware: 8th International Conference, ICES 2008, Prague, Czech Republic, September 21-24, 2008. Proceedings / by: (Language materials, printed)

Feature ExtractionFoundations and Applications / by: (Language materials, printed)

Computer supported cooperative work in design IV11th international conference, CSCWD 2007, Melbourne, Australia, April 26-28, 2007. revised selected papers / by: (Language materials, printed)

Large-scale scientific computing6th international conference, LSSC 2007, Sozopol, Bulgaria, June 5-9, 2007 : revised papers / by: (Language materials, printed)

Writing mental ray shadersA Perceptual Introduction / by: (Language materials, printed)

The language of designtheory and computation / by: (Electronic resources)

Timing optimization through clock skew scheduling by: (Electronic resources)

Management of knowledge imperfection in building intelligent systems by: (Electronic resources)

Mixed reality in architecture, design and construction by: (Electronic resources)

Functional design errors in digital circuitsdiagnosis, correction and repair / by: (Electronic resources)

Introduction to embedded system design using field programmable gate arrays by: (Electronic resources)

Hardware software co-design of a multimedia SOC platform / by: (Electronic resources)

Collaborative design and planning for digital manufacturing by: (Electronic resources)

Geometric algebra with applications in engineering by: (Electronic resources)

Model predictive control system design and implementation using MATLAB by: (Electronic resources)

Carbon nanotube electronics by: (Electronic resources)

Static timing analysis for nanometer designsa practical approach / by: (Electronic resources)

Motivated reinforcement learningcurious characters for multiuser games / by: (Electronic resources)

Complex sciencesFirst International Conference, Complex 2009, Shanghai, China, February 23-25, 2009 : revised papers, part 1 / by: (Electronic resources)

Nanosystems design and technology by: (Electronic resources)

DRM, a design research methodology by: (Electronic resources)

Computational science and its appilcations, ICCSA 2009international conference, Seoul, Korea, June 29-July 2, 2009 : Proceedings.Part I / by: (Electronic resources)

Computational science and its appilcations, ICCSA 2009international conference, Seoul, Korea, June 29-July 2, 2009 : proceedings.Part II / by: (Electronic resources)

Spotlight on modern transformer design by: (Electronic resources)

Growth and development of computer aided innovationthird IFIP WG 5.4 working conference, CAI 2009, Harbin, China, August 20-21, 2009 : proceedings / by: (Electronic resources)

Holonic and multi-agent systems for manufacturing4th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2009, Linz, Austria, August 31 - September 2, 2009 : proceedings / by: (Electronic resources)

Research and Education in Robotics - EUROBOT 2008International Conference, Heidelberg, Germany, May 22-24, 2008 : revised selected papers / by: (Electronic resources)

Analysis, architectures and modelling of embedded systemsThird IFIP TC 10 International Embedded Systems Symposium, IESS 2009, Langenargen, Germany, September 14-16, 2009 : Proceedings / by: (Electronic resources)

Advanced design and manufacturing based on STEP by: (Electronic resources)

Computer aided systems theory - EUROCAST 200912th international conference, Las Palmas de Gran Canaria, Spain, February 15-20, 2009 : revised selected papers / by: (Electronic resources)

Control and automationinternational conference, CA 2009. Held as part of the Future Generation Information Technology Conference, CA 2009, Jeju Island, Korea, December 10-12, 2009 : Proceedings / by: (Electronic resources)

C compilers for ASIPsautomatic compiler generation with LISA / by: (Electronic resources)

ESL models and their applicationelectronic system level design and verification in practice / by: (Electronic resources)

Fault location on power networks by: (Electronic resources)

OntoCAPEa re-usable ontology for chemical process engineering / by: (Electronic resources)

Dynamic modelling for supply chain managementdealing with front-end, back-end and integration issues / by: (Electronic resources)

Embedded software design and programming of multiprocessor system-on-chipSimulink and System C Case Studies / by: (Electronic resources)

Manufacturing simulation with plant simulation and simtalkusage and programming with examples and solutions / by: (Electronic resources)

Nanometer technology designshigh-quality delay tests / by: (Electronic resources)

Computer-aided design of user interfaces VIproceedings of the Seventh International Conference on Computer-Aided Design of User Interfaces (CADUI 2008) / by: (Electronic resources)

Clocking in modern VLSI systems by: (Electronic resources)

Computational surface and roundness metrology by: (Electronic resources)

Structural analysis with the finite element method.linear statics /Volume 1,Basis and solids by: (Electronic resources)

Open verification methodology cookbook by: (Electronic resources)

Embedded system designmodeling, synthesis and verification / by: (Electronic resources)

Geometric algebra computingin engineering and computer science / by: (Electronic resources)

Advanced manufacturing and sustainable logistics8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Germany, April 21-22, 2010 : proceedings / by: (Electronic resources)

Large-scale scientific computing7th International Conference, LSSC 2009, Sozopol, Bulgaria, June 4-8, 2009 : revised papers / by: (Electronic resources)

Mathematical methods for curves and surfaces7th International Conference, MMCS 2008, Tonsberg, Norway, June 26-July 1, 2008 : revised selected papers / by: (Electronic resources)

Security in embedded devices by: (Electronic resources)

Simulation methods for reliability and availability of complex systems by: (Electronic resources)

Designing inclusive interactionsinclusive interactions between people and products in their contexts of use / by: (Electronic resources)

System design optimization for product manufacturing by: (Electronic resources)

Power-efficient system design by: (Electronic resources)

Scalable techniques for formal verification by: (Electronic resources)

Design and verification of microprocessor systems for high-assurance applications by: (Electronic resources)

Analysis and design of resilient VLSI circuitsmitigating soft errors and process variations / by: (Electronic resources)

Advanced test methods for SRAMseffective solutions for dynamic fault detection in nanoscaled technologies / by: (Electronic resources)

Designing embedded systems with the SIGNAL programming languagesynchronous, reactive specification / by: (Electronic resources)

Hardware acceleration of EDA algorithmscustom ICs, FPGAs and GPUs / by: (Electronic resources)

On and off-chip crosstalk avoidance in VLSI design by: (Electronic resources)

Minimizing and exploiting leakage in VLSI design by: (Electronic resources)

VLSI design for video codingH.264/AVC encoding from standard specification to chip / by: (Electronic resources)

Power-aware testing and test strategies for low power devices by: (Electronic resources)

SystemCfrom the ground up / by: (Electronic resources)

Structural optimization with uncertainties by: (Electronic resources)

Shape interrogation for computer aided design and manufacturing by: (Electronic resources)

Composing software componentsa software-testing perspective / by: (Electronic resources)

FPGA designbest practices for team-based design / by: (Electronic resources)

Low power hardware synthesis from concurrent action-oriented specifications by: (Electronic resources)

Synthesis of embedded softwareframeworks and methodologies for correctness by construction / by: (Electronic resources)

E-maintenance by: (Electronic resources)

Analysis and design of univariate subdivision schemes by: (Electronic resources)

Extreme low-power mixed signal IC designsubthreshold source-coupled circuits / by: (Electronic resources)

Software automatic tuningfrom concepts to state-of-the-art results / by: (Electronic resources)

A practical introduction to hardware/software codesign by: (Electronic resources)

Processor and system-on-chip simulation by: (Electronic resources)

Playing with the past by: (Electronic resources)

Analog layout synthesisa survey of topological approaches / by: (Electronic resources)

Low power networks-on-chip by: (Electronic resources)

Reliability of nanoscale circuits and systemsmethodologies and circuit architectures / by: (Electronic resources)

CMOS circuits for passive wireless microsystems by: (Electronic resources)

Ultra low-power integrated circuit design for wireless neural interfaces by: (Electronic resources)

Low-power high-resolution analog to digital convertersdesign, test and calibration / by: (Electronic resources)

On-chip interconnect with aelitecomposable and predictable systems / by: (Electronic resources)

Energy harvesting systemsprinciples, modeling and applications / by: (Electronic resources)

Design creativity 2010 by: (Electronic resources)

Dependability in electronic systemsmitigation of hardware failures, soft errors, and electro-magnetic disturbances / by: (Electronic resources)

Reconfigurable field programmable gate arrays for mission-critical applications by: (Electronic resources)

Cloud connectivity and embedded sensory systems by: (Electronic resources)

Low-power variation-tolerant design in nanometer silicon by: (Electronic resources)

Ultra-thin chip technology and applications by: (Electronic resources)

Post-silicon and runtime verification for modern processors by: (Electronic resources)

Advanced techniques in logic synthesis, optimizations and applications by: (Electronic resources)

Multiprocessor system-on-chiphardware design and tool integration / by: (Electronic resources)

Design of image processing embedded systems using multidimensional data flow by: (Electronic resources)

Run-time adaptation for reconfigurable embedded processors by: (Electronic resources)

Voltage regulators for next generation microprocessors by: (Electronic resources)

On-chip instrumentationdesign and debug for systems on chip / by: (Electronic resources)

Introduction to mixed-signal, embedded design by: (Electronic resources)

Wearable monitoring systems by: (Electronic resources)

Numerical methods and applications7th international conference, NMA 2010, Borovets, Bulgaria, August 20-24, 2010 : revised papers / by: (Electronic resources)

VLSI physical designfrom graph partitioning to timing closure / by: (Electronic resources)

Nanoscale memory repair by: (Electronic resources)

Rapid one-of-a-kind product developmentstrategies, algorithms and tools / by: (Electronic resources)

Design computing and cognition '10 by: (Electronic resources)

Focal-plane sensor-processor chips by: (Electronic resources)

Memory-based logic synthesis by: (Electronic resources)

Mixed reality and human-robot interaction by: (Electronic resources)

Evolutionary optimizationthe [mu]GP toolkit / by: (Electronic resources)

Collaborative design in virtual environments by: (Electronic resources)

Regular nanofabrics in emerging technologiesdesign and fabrication methods for nanoscale digital circuits / by: (Electronic resources)

The future of design methodology by: (Electronic resources)

Solid modelling and CAD systemshow to survive a CAD system / by: (Electronic resources)

Principles of VLSI RTL designa practical guide / by: (Electronic resources)

Global product developmentproceedings of the 20th CIRP Design Conference, Ecole Centrale de Nantes, Nantes, France, 19th-21st April 2010 / by: (Electronic resources)

The simple art of SoC designclosing the gap between RTL and ESL / by: (Electronic resources)

High-level verificationmethods and tools for verification of system-level designs / by: (Electronic resources)

Design and analysis of biomolecular circuitsengineering approaches to systems and synthetic biology / by: (Electronic resources)

Advances on modeling in tissue engineering by: (Electronic resources)

Advances in self-organizing maps8th international workshop, WSOM 2011, Espoo, Finland, June 13-15, 2011 : proceedings / by: (Electronic resources)

Building innovation pipelines through computer-aided innovation4th IFIP WG 5.4 Working Conference, CAI 2011, Strasbourg, France, June 30 - July 1, 2011. Proceedings / by: (Electronic resources)

Distributed large-scale dimensional metrologynew insights / by: (Electronic resources)

Programming many-core chips by: (Electronic resources)

Nano-electronic devicessemiclassical and quantum transport modeling / by: (Electronic resources)

Ontologies in urban development projects by: (Electronic resources)

Complexity metrics in engineering designmanaging the structure of design processes / by: (Electronic resources)

Computational techniques for structural health monitoring by: (Electronic resources)

Guide to geometric algebra in practice by: (Electronic resources)

Holonic and multi-agent systems for manufacturing5th international conference on industrial applications of holonic and multi-agent systems, HoloMAS 2011, Toulouse, France, August 29-31, 2011 : proceedings / by: (Electronic resources)

Innovation in product designfrom CAD to virtual prototyping / by: (Electronic resources)

Formal development of a network-centric RTOSsoftware engineering for reliable embedded systems / by: (Electronic resources)

Multi-objective design space exploration of multiprocessor SoC architecturesthe MULTICUBE Approach / by: (Electronic resources)

Reconfigurable computingfrom FPGAs to hardware/software codesign / by: (Electronic resources)

Information modeling for interoperable dimensional metrology by: (Electronic resources)

Digitally-assisted analog and RF CMOS circuit design for software-defined radio by: (Electronic resources)

Cartesian genetic programming by: (Electronic resources)

Multi-objective evolutionary optimisation for product design and manufacturing by: (Electronic resources)

Euclidean shortest pathsexact or approximate algorithms / by: (Electronic resources)

Computer vision and action recognitiona guide for image processing and computer vision community for action understanding / by: (Electronic resources)

3D TCAD simulation for semiconductor processes, devices and optoelectronics by: (Electronic resources)

Reliability, availability and serviceability of networks-on-chip by: (Electronic resources)

Enabling manufacturing competitiveness and economic sustainabilityproceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011), Montreal, Canada, 2-5 October 2011 / by: (Electronic resources)

Low power design with high-level power estimation and power-aware synthesis by: (Electronic resources)

Error control for network-on-chip links by: (Electronic resources)

Fundamentals of digital manufacturing science by: (Electronic resources)

The MPEG representation of digital media by: (Electronic resources)

Scalable multi-core architecturesdesign methodologies and tools / by: (Electronic resources)

Process variations and probabilistic integrated circuit design by: (Electronic resources)

Curves and surfaces7th International Conference, Avignon, France, June 24 - 30, 2010 : revised selected papers / by: (Electronic resources)

Virtual reality and animation for MATLAB and Simulink usersvisualization of dynamic models and control simulations / by: (Electronic resources)

Computer-aided nonlinear control system designusing describing function models / by: (Electronic resources)

Understanding and using the controller area network communication protocoltheory and practice / by: (Electronic resources)

High performance fiber reinforced cement composites 6HPFRCC 6 / by: (Electronic resources)

Computer aided systems theory - EUROCAST 201113th International Conference, Las Palmas de Gran Canaria, Spain, February 6-11, 2011 : revised selected papers.Part I / by: (Electronic resources)

Computer aided systems theory - EUROCAST 201113th International Conference, Las Palmas de Gran Canaria, Spain, February 6-11, 2011 : revised selected papers.Part II / by: (Electronic resources)

Distributed, embedded and real-time Java systems by: (Electronic resources)

SystemVerilog for verificationa guide to learning the testbench language features / by: (Electronic resources)

Designing inclusive systemsdesigning inclusion for real-world applications / by: (Electronic resources)

Statistical performance analysis and modeling techniques for nanometer VLSI designs by: (Electronic resources)

All-embracing manufacturingroadmap system / by: (Electronic resources)

Computer aided surgery7th Asian Conference on Computer Aided Surgery, Bangkok, Thailand, August 2011 : proceedings / by: (Electronic resources)

Heterogeneous multicore processor technologies for embedded systems by: (Electronic resources)

Similarity and modeling in science and engineering by: (Electronic resources)

Guide to computational geometry processingfoundations, algorithms, and methods / by: (Electronic resources)

Large-scale scientific computing8th International Conference, LSSC 2011, Sozopol, Bulgaria, June 6-10, 2011, Revised selected papers / by: (Electronic resources)

Production systems and supply chain management in emerging countriesbest practices : selected papers from the International Conference on Production Research (ICPR) / by: (Electronic resources)

Automated configuration problem solving by: (Electronic resources)

Cooperative design, visualization, and engineering9th International Conference, CDVE 2012, Osaka, Japan, September 2-5, 2012 : proceedings / by: (Electronic resources)

Analytical methods in anisotropic elasticitywith symbolic computational tools / by: (Electronic resources)

Practical aspects of design scienceEuropean Design Science Symposium, EDSS 2011, Leixlip, Ireland, October 14, 2011 : revised selected papers / by: (Electronic resources)

Computer-aided design in power engineeringapplication of software tools / by: (Electronic resources)

Design computing and cognition '08proceedings of the third International Conference on Design Computing and Cognition / by: (Electronic resources)

Line drawing interpretation by: (Electronic resources)

Standardized functional verification by: (Electronic resources)

Subdivision surfaces by: (Electronic resources)

Biologically inspired designcomputational methods and tools / by: (Electronic resources)

The proper generalized decomposition for advanced numerical simulationsa primer / by: (Electronic resources)

MEMS product engineeringhandling the diversity of an emerging technology. Best Practices for Cooperative Development / by: (Electronic resources)

Mathematical methods for curves and surfaces8th International Conference, MMCS 2012, Oslo, Norway, June 28 - July 3, 2012 : revised selected papers / by: (Electronic resources)

Digital mediaa problem-solving approach for computer graphics / by: (Electronic resources)

Inclusive designingjoining usability, accessibility, and inclusion / by: (Electronic resources)

CIRP encyclopedia of production engineering by: (Electronic resources)

Advanced field-solver techniques for RC extraction of integrated circuits by: (Electronic resources)

Multiphysics simulationelectromechanical system applications and optimization / by: (Electronic resources)

Optimization in science and engineeringin honor of the 60th birthday of Panos M. Pardalos / by: (Electronic resources)

Cloud-based design and manufacturing (CBDM)a service-oriented product development paradigm for the 21st Century / by: (Electronic resources)

The non-equilibrium Green's function method for nanoscale device simulation by: (Electronic resources)

Advances in production management systemsinnovative and knowledge-based production management in a global-local world : IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014 : proceedings.Part III / by: (Electronic resources)

Advances in production management systemsinnovative and knowledge-based production management in a global-local world : IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014 : proceedings.Part II / by: (Electronic resources)

Advances in production management systemsinnovative and knowledge-based production management in a global-local world : IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014 : proceedings.Part I / by: (Electronic resources)

Cooperative design, visualization, and engineering11th International Conference, CDVE 2014, Seattle, WA, USA, September 14-17, 2014 : proceedings / by: (Language materials, printed)

Separated representations and PGD-based model reductionfundamentals and applications / by: (Language materials, printed)

Design computing and cognition '12 by: (Language materials, printed)

Exercises in computational mathematics with MATLAB by: (Language materials, printed)

SAGA - advances in shApes, geometry, and algebraresults from the Marie Curie Initial Training Network / by: (Electronic resources)

Home energy informationmeasuring and managing energy consumption in residential buildings / by: (Electronic resources)

Progress in differential-algebraic equationsDeskriptor 2013 / by: (Electronic resources)

Product lifecycle management for a global market11th IFIP WG 5.1 International Conference, PLM 2014, Yokohama, Japan, July 7-9, 2014 : revised selected papers / by: (Electronic resources)

Space modeling with SolidWorks and NX by: (Electronic resources)

CAD, 3D modeling, engineering analysis, and prototype experimentationindustrial and research applications / by: (Electronic resources)

Configurable intelligent optimization algorithmdesign and practice in manufacturing / by: (Electronic resources)

Perfecting engineering and technical drawingreducing errors and misinterpretations / by: (Electronic resources)

Circuit design for reliability by: (Electronic resources)

Studying visual and spatial reasoning for design creativity by: (Electronic resources)

Advanced customization in architectural design and construction by: (Electronic resources)

Advances in architectural geometry 2014 by: (Electronic resources)

Numerical methods and applications8th International Conference, NMA 2014, Borovets, Bulgaria, August 20-24, 2014 : revised selected papers / by: (Electronic resources)

The finite element method and applications in engineering using ANSYS by: (Electronic resources)

AIDA-CMKmulti-algorithm optimization kernel applied to analog IC sizing / by: (Electronic resources)

Design computing and cognition '14 by: (Electronic resources)

Identifying product and process state drivers in manufacturing systems using supervised machine learning by: (Electronic resources)

New challenges in grid generation and adaptivity for scientific computing by: (Electronic resources)

Computer-aided architectural design futuresthe next city - new technologies and the future of the built environment : 16th International Conference, CAAD Futures 2015, Sao Paulo, Brazil, July 8-10, 2015 : selected papers / by: (Electronic resources)

Applications of computational tools in biosciences and medical engineering by: (Electronic resources)

Mathematical progress in expressive image synthesis IIextended and selected results from the Symposium MEIS2014 / by: (Electronic resources)

Countdown to a moon launchpreparing Apollo for its historic journey / by: (Electronic resources)

Advances in production management systemsinnovative production management towards sustainable growth : IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015 : proceedings.Part I / by: (Electronic resources)

Advances in production management systemsinnovative production management towards sustainable growth : IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015 : proceedings.Part II / by: (Electronic resources)

Curves and surfaces8th International Conference, Paris, France, June 12-18, 2014 : revised selected papers / by: (Electronic resources)

Creativity in intelligent technologies and data sciencefirst conference, CIT&DS 2015, Volgograd, Russia, September 15-17, 2015 : proceedings / by: (Electronic resources)

VLSI-SoCat the crossroads of emerging trends : 21st IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2013, Istanbul, Turkey, October 6-9, 2013 : revised and extended selected papers / by: (Electronic resources)

VLSI-SoC: internet of things foundations22nd IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2014, Playa del Carmen, Mexico, October 6-8, 2014 : revised and extended selected papers / by: (Electronic resources)

Cooperative design, visualization, and engineering12th International Conference, CDVE 2015, Mallorca, Spain, September 20-23, 2015 : proceedings / by: (Electronic resources)

Modelling behaviourdesign modelling symposium 2015 / by: (Electronic resources)

Analyzing and modeling interdisciplinary product developmenta framework for the analysis of knowledge characteristics and design support / by: (Electronic resources)

Computer aided systems theory - EUROCAST 201515th International Conference, Las Palmas de Gran Canaria, Spain, February 8-13, 2015 : revised selected papers / by: (Electronic resources)

Isogeometric analysis and applications 2014 by: (Electronic resources)

Mechatronics by bond graphsan object-oriented approach to modelling and simulation / by: (Electronic resources)

Parallelism in matrix computations by: (Electronic resources)

Problem solving in foundation engineering using foundationPro by: (Electronic resources)

Solid modeling and applicationsrapid prototyping, CAD and CAE theory / by: (Electronic resources)

Teaching learning based optimization algorithmand its engineering applications / by: (Electronic resources)

Computer aided virtual manufacturing using Creo parametriceasy to learn step by step guide / by: (Electronic resources)

Power amplifiers for the S-, C-, X- and Ku-bandsan EDA perspective / by: (Electronic resources)

Basic principles of concrete structures by: (Electronic resources)

Parabolic trough collector prototypes for low-temperature process heat by: (Electronic resources)

Intelligent computer systems in engineering designprinciples and applications / by: (Electronic resources)

CAD/CAM, Robotics and Factories of the FutureProceedings of the 28th International Conference on CARs & FoF 2016 / by: (Electronic resources)

Designing around peopleCWUAAT 2016 / by: (Electronic resources)

Proceedings of International Conference on ICT for Sustainable DevelopmentICT4SD 2015 Volume 1 / by: (Electronic resources)

Proceedings of International Conference on ICT for Sustainable DevelopmentICT4SD 2015. Volume 2 / by: (Electronic resources)

The finite element analysis program MSC Marc/Mentata first introduction / by: (Electronic resources)

Product lifecycle management in the era of internet of things12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015 : revised selected papers / by: (Electronic resources)

Engineering graphicstheoretical foundations of engineering geometry for design / by: (Electronic resources)

Experimental design researchapproaches, perspectives, applications / by: (Electronic resources)

Mathematical progress in expressive image synthesis IIIselected and extended results from the symposium MEIS2015 / by: (Electronic resources)

Scientific computing in electrical engineeringSCEE 2014, Wuppertal, Germany, July 2014 / by: (Electronic resources)

A far-infrared spectro-spatial space interferometerinstrument simulator and testbed implementation / by: (Electronic resources)

3D printed science projectsideas for your classroom, science fair, or home / by: (Electronic resources)

Introduction to nonlinear thermomechanics of solids by: (Electronic resources)

Model design and simulation analysis15th International Conference, AsiaSim 2015, Jeju, Korea, November 4-7, 2015 : revised selected papers / by: (Electronic resources)

Discrete optimization in architecturearchitectural & urban layout / by: (Electronic resources)

VLSI-SoCdesign for reliability, security, and low power : 23rd IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2015, Daejeon, Korea, October 5-7, 2015 : revised selected papers / by: (Electronic resources)

Advances in production management systemsinitiatives for a sustainable world : IFIP WG 5.7 International Conference, APMS 2016, Iguassu Falls, Brazil, September 3-7, 2016 : revised selected papers / by: (Electronic resources)

Product lifecycle management for digital transformation of industries13th IFIP WG 5.1 International Conference, PLM 2016, Columbia, SC, USA, July 11-13, 2016 : revised selected papers / by: (Electronic resources)

Discrete optimization in architectureextremely modular systems / by: (Electronic resources)

Advances in 3D printing & additive manufacturing technologies by: (Electronic resources)

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems.proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /Volume 9 by: (Electronic resources)

Advances on mechanics, design engineering and manufacturingproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), 14-16 September, 2016, Catania, Italy / by: (Electronic resources)

Discrete optimization in architecturebuilding envelope / by: (Electronic resources)

Proceedings of the 7th International Conference on Discrete Element Methods by: (Electronic resources)

Advanced finite element simulation with MSC Marcapplication of user subroutines / by: (Electronic resources)

Tactile display for virtual 3D shape rendering by: (Electronic resources)

Complexity management in engineering design - a primer by: (Electronic resources)

Designing with computational intelligence by: (Electronic resources)

Proceedings of the 13th International Scientific ConferenceComputer Aided Engineering / by: (Electronic resources)

Augmented realitywhere we will all live / by: (Electronic resources)

Design theorymethods and organization for innovation / by: (Electronic resources)

Fire safety of historical buildingstraditional versus innovative "behavioural design" solutions by using wayfinding systems / by: (Electronic resources)

Meshfree methods for partial differential equations VIII by: (Electronic resources)

Computer-aided architectural designfuture trajectories : 17th International Conference, CAAD Futures 2017, Istanbul, Turkey, July 12-14, 2017 : selected papers / by: (Electronic resources)

Tests and proofs11th International Conference, TAP 2017, held as part of STAF 2017, Marburg, Germany, July 19-20, 2017 : proceedings / by: (Electronic resources)

System reduction for nanoscale IC design by: (Electronic resources)

Advances in modeling and simulationseminal research from 50 years of winter simulation conferences / by: (Electronic resources)

Advances in production management systemsthe path to intelligent, collaborative and sustainable manufacturing : IFIP WG 5.7 International Conference, APMS 2017, Hamburg, Germany, September 3-7, 2017 : proceedings.Part I / by: (Electronic resources)

Advances in production management systemsthe path to intelligent, collaborative and sustainable manufacturing : IFIP WG 5.7 International Conference, APMS 2017, Hamburg, Germany, September 3-7, 2017 : proceedings.Part II / by: (Electronic resources)

VLSI-SoCsystem-on-chip in the nanoscale era - design, verification and reliability : 24th IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2016, Tallinn, Estonia, September 26-28, 2016 : revised selected papers / by: (Electronic resources)

New activities for cultural heritageproceedings of the International Conference HeritageBot 2017 / by: (Electronic resources)

Computer graphics for Java programmers by: (Electronic resources)

Subdivision surface modeling technology by: (Electronic resources)

Mathematical methods for curves and surfaces9th International Conference, MMCS 2016, Tonsberg, Norway, June 23-28, 2016 : revised selected papers / by: (Electronic resources)

Learn Autodesk Inventor 2018 basics3D modeling, 2D graphics, and assembly design / by: (Electronic resources)

Product lifecycle management and the industry of the future14th IFIP WG 5.1 International Conference, PLM 2017, Seville, Spain, July 10-12, 2017 : revised selected papers / by: (Electronic resources)

Framelets and waveletsalgorithms, analysis, and applications / by: (Electronic resources)

Advances in ergonomics of manufacturingmanaging the enterprise of the future : proceedings of the AHFE 2017 International Conference on Human Aspects of Advanced Manufacturing, July 17-21, 2017, The Westin Bonaventure Hotel, Los Angeles, California, USA / by: (Electronic resources)

Advanced gear engineering by: (Electronic resources)

A first course in engineering drawing by: (Electronic resources)

Design of structural elements with tropical hardwoods by: (Electronic resources)

Industry 4.0managing the digital transformation / by: (Electronic resources)

Computational ship design by: (Electronic resources)

Masters of the structural aesthetic by: (Electronic resources)

Humanizing digital realityDesign Modelling Symposium Paris 2017 / by: (Electronic resources)

Computational morphologiesdesign rules between organic models and responsive architecture / by: (Electronic resources)

Advances in manufacturing by: (Electronic resources)

MES compendiumperfect MES solutions based on HYDRA / by: (Electronic resources)

Millimeter-wave low noise amplifiers by: (Electronic resources)

A first introduction to the finite element analysis program MSC Marc/Mentat by: (Electronic resources)

Information and communication technology for sustainable developmentproceedings of ICT4SD 2016.Volume 2 / by: (Electronic resources)

Information and communication technology for sustainable developmentproceedings of ICT4SD 2016.Volume 1 / by: (Electronic resources)

Engineering applications for new materials and technologies by: (Electronic resources)

FEM analysis of the human knee jointa review / by: (Electronic resources)

Urban wind environmentIntegrated Climate-Sensitive Planning and Design / by: (Electronic resources)

Solid modeling and applicationsrapid prototyping, CAD and CAE theory / by: (Electronic resources)

Reduced-order modeling (ROM) for simulation and optimizationpowerful algorithms as key enablers for scientific computing / by: (Electronic resources)

Scientific computing in electrical engineeringSCEE 2016, St. Wolfgang, Austria, October 2016 / by: (Electronic resources)

Advances in production management systemsproduction management for data-driven, intelligent, collaborative, and sustainable manufacturing : IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018 : proceedings.Part I / by: (Electronic resources)

Advances in production management systemsproduction management for data-driven, intelligent, collaborative, and sustainable manufacturing : IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018 : proceedings.Part II / by: (Electronic resources)

Building information modelingtechnology foundations and industry practice / by: (Electronic resources)

Mastering 3D printing in the classroom, library, and lab by: (Electronic resources)

Domain decomposition methods in science and engineering XXIV by: (Electronic resources)

Graphic imprintsthe influence of representation and ideation tools in architecture / by: (Electronic resources)

Advances in design, simulation and manufacturingproceedings of the International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2018, June 12-15, 2018, Sumy, Ukraine / by: (Electronic resources)

Advances in ergonomics in designproceedings of the AHFE 2018 International Conference on Ergonomics in Design, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA / by: (Electronic resources)

Advances in manufacturing, production management and process controljoint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA / by: (Electronic resources)

Advances in interdisciplinary practice in industrial designproceedings of the AHFE 2018 International Conference on Interdisciplinary Practice in Industrial Design, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA / by: (Electronic resources)

Sustainable manufacturing and remanufacturing managementprocess planning, optimization and spplications / by: (Language materials, printed)

Computational and manufacturing strategiesexperimental expressions of wood capabilities / by: (Electronic resources)

3D visual content creation, coding and delivery by: (Electronic resources)

ICGG 2018 - proceedings of the 18th International Conference on Geometry and Graphics40th Anniversary - Milan, Italy, August 3-7, 2018 / by: (Electronic resources)

Dense and green building typologiesresearch, policy and practice perspectives / by: (Electronic resources)

Combinatorial optimization problems in planning and decision makingtheory and applications / by: (Electronic resources)

Advances in informatics and computing in civil and construction engineeringproceedings of the 35th CIB W78 2018 Conference : IT in Design, Construction, and Management / by: (Electronic resources)

Advanced CAD modelingexplicit, parametric, free-form CAD and re-engineering / by: (Electronic resources)

Transdisciplinary multispectral modeling and cooperation for the preservation of cultural heritagefirst International Conference, TMM_CH 2018, Athens, Greece, October 10-13, 2018 : revised selected papers.Part II / by: (Electronic resources)

Transdisciplinary multispectral modeling and cooperation for the preservation of cultural heritagefirst International Conference, TMM_CH 2018, Athens, Greece, October 10-13, 2018 : revised selected papers.Part I / by: (Electronic resources)

Digital wood designinnovative techniques of representation in architectural design / by: (Electronic resources)

Manufacturing engineeringselect proceedings of CPIE 2018 / by: (Electronic resources)

Proceedings of the 14th International Scientific Conferencecomputer aided engineering / by: (Electronic resources)

Landscape labdrawing, perception and design for the next landscape models / by: (Electronic resources)

Methods for solving complex problems in fluids engineering by: (Electronic resources)

OpenFOAMselected papers of the 11th Workshop / by: (Electronic resources)

A holistic approach to ship design.Volume 1,Optimisation of ship design and operation for life cycle by: (Electronic resources)

Computer vision and audition in urban analysis using the remorph framework by: (Electronic resources)

Advances in manufacturing II.Volume 1,Solutions for industry 4.0 by: (Electronic resources)

Advances in manufacturing II.Volume 2,Production engineering and management by: (Electronic resources)

Advances in engineering designselect proceedings of FLAME 2018 / by: (Electronic resources)

Summer of simulation50 years of seminal computer simulation research / by: (Electronic resources)

Industry 4.0developments towards the fourth Industrial Revolution / by: (Electronic resources)

Backward fuzzy rule interpolation by: (Electronic resources)

27th International Meshing Roundtable by: (Electronic resources)

The Internet of Things in the industrial sectorsecurity and device connectivity, smart environments, and industry 4.0 / by: (Electronic resources)

Dense and green building typologiesdesign perspectives / by: (Electronic resources)

Ray tracinga tool for all / by: (Electronic resources)

Advanced methods for geometric modeling and numerical simulation by: (Electronic resources)

Si detectors and characterization for HEP and photon science experimenthow to design detectors by TCAD simulation / by: (Electronic resources)

Advances in computational methods in manufacturingselect papers from ICCMM 2019 / by: (Electronic resources)

Data mining in structural dynamic analysisa signal processing perspective / by: (Electronic resources)

Fundamentals of geometry construction|bthe math behind the CAD by: (Electronic resources)

Advanced manufacturing processesselected papers from the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), September 10-13, 2019, Odessa, Ukraine / by: (Electronic resources)

Innovative product design and intelligent manufacturing systemsselect proceedings of ICIPDIMS 2019 / by: (Electronic resources)

Cloud computing for engineering applications by: (Electronic resources)

Non-conventional unit operationssolving practical issues / by: (Electronic resources)

Recent advances in mechanical engineeringselect proceedings of NCAME 2019 / by: (Electronic resources)

New approaches to gear design and production by: (Electronic resources)

Advances in applied mechanical engineeringselect proceedings of ICAMER 2019 / by: (Electronic resources)

Recent trends in mechanical engineeringselect proceedings of ICIME 2019 / by: (Electronic resources)

Product developmentprinciples and tools for creating desirable and transferable designs / by: (Electronic resources)

The new economy of the product life cycleinnovation and design in the digital era / by: (Electronic resources)

ICT systems and sustainabilityproceedings of ICT4SD 2019.Volume 1 / by: (Electronic resources)

Machine learning methods for reverse engineering of defective structured surfaces by: (Electronic resources)

Pipeline spatial data modeling and pipeline WebGISdigital oil and gas pipeline: research and practice / by: (Electronic resources)

Power and gas asset managementregulation, planning and operation of digital energy systems / by: (Electronic resources)

Digital transformation of the design, construction and management processes of the built environment by: (Electronic resources)

Advances in engineering design and simulationselect proceedings of NIRC 2018 / by: (Electronic resources)

Faces of geometryfrom Agnesi to Mirzakhani / by: (Electronic resources)

AI technology for underwater robots by: (Electronic resources)

Technological paradigms and digital erasdata-driven visions for building design / by: (Electronic resources)

Biomedical engineering and computational intelligenceproceedings of the World Thematic Conference : Biomedical Engineering and Computational Intelligence, BIOCOM 2018 / by: (Electronic resources)

Proceedings of the 2019 DigitalFUTURESthe 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2019) / by: (Electronic resources)

Design tools and methods in industrial engineeringproceedings of the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019, September 9-10, 2019, Modena, Italy / by: (Electronic resources)

Advances in design, simulation and manufacturing IIproceedings of the 2nd International Conference on Design, Simulation, Manufacturing : the Innovation Exchange, DSMIE-2019, June 11-14, 2019, Lutsk, Ukraine / by: (Electronic resources)

Advances in interdisciplinary practice in industrial designproceedings of the AHFE 2019 International Conference on Interdisciplinary Practice in Industrial Design, July 24-28, 2019, Washington D.C., USA / by: (Electronic resources)

Value based and intelligent asset managementmastering the asset management transformation in industrial plants and infrastructures / by: (Electronic resources)

Advances in manufacturing, production management and process controlproceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control, July 24-28, 2019, Washington D.C., USA / by: (Electronic resources)

Advances in additive manufacturing, modeling systems and 3D prototypingproceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA / by: (Electronic resources)

Information and communication technology for sustainable developmentproceedings of ICT4SD 2018 / by: (Electronic resources)

Foundations of multi-paradigm modelling for cyber-physical systems by: (Electronic resources)

Sustainable product developmenttools, methods and examples / by: (Electronic resources)

Structural health monitoringa non-deterministic framework / by: (Electronic resources)

Finite element analysis for civil engineering with DIANA software by: (Electronic resources)

Application of coupled CFD-DEM simulation to separation process in combine harvester cleaning devices by: (Electronic resources)

Manufacturing engineeringselect proceedings of CPIE 2019 / by: (Electronic resources)

Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (Electronic resources)

Decision support systems for weed management by: (Electronic resources)

HCI and design in the context of dementia by: (Electronic resources)

Architectural intelligenceselected papers from the 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2019) / by: (Electronic resources)

Advances in production management systemsthe path to digital transformation and innovation of production management systems : IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 - September 3, 2020 : proceedings.Part I / by: (Electronic resources)

Advances in production management systemstowards smart and digital manufacturing : IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 - September 3, 2020 : proceedings.Part II / by: (Electronic resources)

Integrated design engineeringinterdisciplinary and holistic product development / by: (Electronic resources)

Design thinkingcreativity, collaboration and culture / by: (Electronic resources)

Natural language processing for electronic design automation by: (Electronic resources)

Advances in production management systemsproduction management for the factory of the future : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019 : proceedings.Part I / by: (Electronic resources)

Advances in production management systemstowards smart production management systems : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019 : proceedings.Part II / by: (Electronic resources)

Computer-aided architectural design"Hello, culture": 18th International Conference, CAAD Futures 2019, Daejeon, Republic of Korea, June 26-28, 2019, Selected Papers / by: (Electronic resources)

CIRP encyclopedia of production engineering by: (Electronic resources)

Domain decomposition methods in science and engineering XXV by: (Electronic resources)

ACMSM25proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials / by: (Electronic resources)

Advances in ergonomics in designproceedings of the AHFE 2019 International Conference on Ergonomics in Design, July 24-28, 2019, Washington D.C., USA / by: (Electronic resources)

Troubleshooting finite-element modeling with Abaquswith application in structural engineering analysis / by: (Electronic resources)

Data augmented designembracing new data for sustainable urban planning and design / by: (Electronic resources)

From building information modelling to mixed reality by: (Electronic resources)

Seismic performance analysis of concrete gravity dams by: (Electronic resources)

Trends in mechanical and biomedical designselect proceedings of ICMechD 2019 / by: (Electronic resources)

Advances in VLSI and embedded systemsselect proceedings of AVES 2019 / by: (Electronic resources)

Advances in production and industrial engineeringselect proceedings of ICETMIE 2019 / by: (Electronic resources)

Advances in electromechanical technologiesselect proceedings of TEMT 2019 / by: (Electronic resources)

3D printing architectureworkflows, applications, and trends / by: (Electronic resources)

Industry 4.0 and advanced manufacturingproceedings of I-4AM 2019 / by: (Electronic resources)

Digital conversion on the way to Industry 4.0selected papers from ISPR2020, September 24-26, 2020 Online - Turkey / by: (Electronic resources)

Recent trends in mechanical engineeringselect proceedings of ICIME 2020 / by: (Electronic resources)

Advances in manufacturing processesselect proceedings of RAM 2020 / by: (Electronic resources)

Recent advances in mechanical engineeringselect proceedings of ITME 2019 / by: (Electronic resources)

Core Blender developmentunderstanding the essential source code / by: (Electronic resources)

Matrix discrete element analysis of geological and geotechnical engineering by: (Electronic resources)

Dynamics in microwave chemistry by: (Electronic resources)

Proceedings of the 2020 DigitalFUTURESthe 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020) / by: (Electronic resources)

Isogeometric analysis and applications 2018 by: (Electronic resources)

Advances on mechanics, design engineering and manufacturing IIIproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2020, June 2-4, 2020 / by: (Electronic resources)

High performance simulation for industrial paint shop applications by: (Electronic resources)

Advances in design, simulation and manufacturing IVproceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (Electronic resources)

Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020) by: (Electronic resources)

Advances in engineering designselect proceedings of FLAME 2020 / by: (Electronic resources)

Advanced manufacturing processes IIselected papers from the 2nd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2020), September 8-11, 2020, Odessa, Ukraine / by: (Electronic resources)

Advances in manufacturing systemsselect proceedings of RAM 2020 / by: (Electronic resources)

Collagea process in architectural design / by: (Electronic resources)

Artificial intelligence in construction engineering and management by: (Electronic resources)

A holistic approach to ship design.Volume 2,Application case studies by: (Electronic resources)

Recent trends in engineering designselect proceedings of ICAST 2020 / by: (Electronic resources)

FE computation on accuracy fabrication of ship and offshore structure based on processing mechanics by: (Electronic resources)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part I / by: (Electronic resources)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part II / by: (Electronic resources)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part III / by: (Electronic resources)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part IV / by: (Electronic resources)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part V / by: (Electronic resources)

Design engineering and science by: (Electronic resources)

Advances in mechanical engineeringselect proceedings of ICAME 2020 / by: (Electronic resources)

Post-industrial roboticsexploring informed architecture / by: (Electronic resources)

Abstract pattern illustrations for textile printing by: (Electronic resources)

Innovations in mechanical engineering by: (Electronic resources)

Innovations in industrial engineering by: (Electronic resources)

Recent trends in engineering designselect proceedings of ICCEMME 2021 / by: (Electronic resources)

DigiTwinan approach for production process optimization in a built environment / by: (Electronic resources)

Integrated computational life cycle engineering for traction batteries by: (Electronic resources)

Virtual reality technology in mining machineryvirtual assembly, virtual planning and virtual monitoring / by: (Electronic resources)

Outdoor thermal comfort in urban environmentassessments and applications in urban planning and design / by: (Electronic resources)

Data-driven engineering design by: (Electronic resources)

Towards sustainable customizationbridging smart products and manufacturing systems : proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021 / by: (Electronic resources)

Digitizing production systemsselected papers from ISPR2021, October 07-09, 2021 Online, Turkey / by: (Electronic resources)

Advanced manufacturing processes IIIselected papers from the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), September 7-10, 2021, Odessa, Ukraine / by: (Electronic resources)

Proceedings of the 2021 Digitalfuturesthe 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021) / by: (Electronic resources)

Algorithm-driven truss topology optimization for additive manufacturing by: (Electronic resources)

Recent advances in manufacturing modelling and optimizationselect proceedings of RAM 2021 / by: (Electronic resources)

Advances in manufacturing III.Volume 1,Mechanical engineering: research and technology innovations, Industry 4.0 by: (Electronic resources)

Rapid robotingrecent advances on 3D printers and robotics / by: (Electronic resources)

Architectural graphics.Volume 3,Graphics for education and thought by: (Electronic resources)

Applications of computational methods in manufacturing and product designselect proceedings of IPDIMS 2020 / by: (Electronic resources)

Advances in design, simulation and manufacturing Vproceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland.Volume 1,Manufacturing and materials engineering / by: (Electronic resources)

Design managementcreate, develop, and lead effective design teams / by: (Electronic resources)

Computer-aided architectural designdesign imperatives : the future is now : 19th International Conference, CAAD Futures 2021, Los Angeles, CA, USA, July 16-18, 2021 : selected papers / by: (Electronic resources)

Architecting a knowledge-based platform for design engineering 4.0 by: (Electronic resources)

Digital twins in manufacturingvirtual and physical twins for advanced manufacturing / by: (Electronic resources)

VLSI physical design: from graph partitioning to timing closure by: (Electronic resources)

Integrated CAD by optimizationarchitecture, engineering, construction, urban development and management / by: (Electronic resources)

3D physical and virtual models in fetal medicineapplications and procedures / by: (Electronic resources)

Collaborative knowledge management through product lifecyclea computational perspective / by: (Electronic resources)

Flexible automation and intelligent manufacturingthe human-data-technology nexus : proceedings of FAIM 2022, June 19-23, 2022, Detroit, Michigan, USA.Volume 2 / by: (Electronic resources)

Patterns of interactioncomputational design across scales / by: (Electronic resources)

Towards Industry 5.0selected papers from ISPR2022, October 6-8, 2022, Antalya / by: (Electronic resources)

Computer aided engineering of batteries by: (Electronic resources)

Hybrid intelligenceproceedings of the 4th International Conference on Computational Design and Robotic Fabrication (CDRF 2022) / by: (Electronic resources)

Targeted cancer therapy in biomedical engineering by: (Electronic resources)

Advances on mechanics, design engineering and manufacturing IVproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2022, June 1-3, 2022, Ischia, Italy / by: (Electronic resources)

Flexible automation and intelligent manufacturingthe human-data-technology nexus : proceedings of FAIM 2022, June 19-23, 2022, Detroit, Michigan, USA.Volume 1 / by: (Electronic resources)

Recent developments in mechanics and designselect proceedings of INCOME 2021 / by: (Electronic resources)

Advances in VLSI and embedded systemsselect proceedings of AVES 2021 / by: (Electronic resources)

Excel-VBAfrom solving mathematical puzzles to analysing complex engineering problems / by: (Electronic resources)

Optimization methods for product and system design by: (Electronic resources)

Intelligent manufacturing systems in industry 4.0select proceedings of IPDIMS 2022 / by: (Electronic resources)

Proceedings of the 3rd annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).Volume 1,Advanced materials and manufacturing technologies by: (Electronic resources)

Prototyping user experience in eXtended reality by: (Electronic resources)

Advances in engineering designselect proceedings of FLAME 2022 / by: (Electronic resources)

Computer-aided architectural design, INTERCONNECTIONS : co-computing beyond boundaries20th International Conference, CAAD Futures 2023, Delft, The Netherlands, July 5-7, 2023 : selected papers / by: (Electronic resources)

Augmented realitywhere we will all live / by: (Electronic resources)

Formal methods in architectureproceedings of the 6th International Symposium on Formal Methods in Architecture (6FMA), A Coruna 2022 / by: (Electronic resources)

Additive manufacturing with metalsdesign, processes, materials, quality assurance, and applications / by: (Electronic resources)