Materials Engineering.

Advances in structural engineering.Volume twoDynamics. by: (書目-電子資源)

A primer on the geometry of carbon nanotubes and their modifications by: (書目-電子資源)

Insight into designing biocompatible magnesium alloys and compositesprocessing, mechanical and corrosion characteristics / by: (書目-電子資源)

Modeling approaches to natural convection in porous media by: (書目-電子資源)

Transparent ceramics by: (書目-電子資源)

Electro-chemo-mechanics of anodic porous alumina nano-honeycombsself-ordered growth and actuation / by: (書目-電子資源)

Eco-friendly polymer nanocompositesprocessing and properties / by: (書目-電子資源)

From creep damage mechanics to homogenization methodsa Liber Amicorum to celebrate the birthday of Nobutada Ohno / by: (書目-電子資源)

Furniture design by: (書目-電子資源)

Nanoporous aluminafabrication, structure, properties and applications / by: (書目-電子資源)

Electrochemically engineered nanoporous materialsmethods, properties and applications / by: (書目-電子資源)

Eco-friendly polymer nanocompositeschemistry and applications / by: (書目-電子資源)

Temperature measurement during millisecond annealingripple pyrometry for flash lamp annealers / by: (書目-電子資源)

Defects and impurities in silicon materialsan introduction to atomic-level silicon engineering / by: (書目-電子資源)

Design and analysis of reinforced fiber composites by: (書目-電子資源)

Fluid flow and heat transfer in rotating porous media by: (書目-電子資源)

Materials for energy infrastructure by: (書目-電子資源)

Textile materials for lightweight constructionstechnologies - methods - materials - properties / by: (書目-電子資源)

Nanomaterials in extreme environmentsfundamentals and applications / by: (書目-電子資源)

Active terahertz metamaterial for biomedical applications by: (書目-電子資源)

Mechanics of composite and multifunctional materials.Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /Volume 7 by: (書目-電子資源)

Smart Intelligent Aircraft Structures (SARISTU)proceedings of the Final Project Conference / by: (書目-電子資源)

Challenges in mechanics of time dependent materials.Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /Volume 2 by: (書目-電子資源)

Advancement of optical methods in experimental mechanics.Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /Volume 3 by: (書目-電子資源)

Proceedings of the III Advanced Ceramics and Applications Conference by: (書目-電子資源)

The automated design of materials far from equilibrium by: (書目-電子資源)

Information science for materials discovery and design by: (書目-電子資源)

Solid oxide fuel cell componentsinterfacial compatibility of SOFC glass seals / by: (書目-電子資源)

Mechanothermodynamics by: (書目-電子資源)

Silica aerogel compositesnovel fabrication methods / by: (書目-電子資源)

Nano and biotech based materials for energy building efficiency by: (書目-電子資源)

Biomaterials and medical devicesa perspective from an emerging country / by: (書目-電子資源)

Electromagnetic ultrasonic guided waves by: (書目-電子資源)

Handbook of bioceramics and biocomposites by: (書目-電子資源)

Peptide-mediated biomineralization by: (書目-電子資源)

Corrosion control and surface finishingenvironmentally friendly approaches / by: (書目-電子資源)

Power systems grounding by: (書目-電子資源)

Generalized continua as models for classical and advanced materials by: (書目-電子資源)

Microstructure-property correlations for hard, superhard, and ultrahard materials by: (書目-電子資源)

Nanoclay reinforced polymer compositesnatural fibre/nanoclay hybrid composites / by: (書目-電子資源)

Surface modifications and growth of titanium dioxide for photo-electrochemical water splitting by: (書目-電子資源)

Carbon nanoparticles and nanostructures by: (書目-電子資源)

Particulate compositesfundamentals and applications / by: (書目-電子資源)

Advances in nanocompositesmodeling, characterization and applications / by: (書目-電子資源)

Neural engineeringfrom advanced biomaterials to 3D fabrication techniques / by: (書目-電子資源)

Self-healing materials by: (書目-電子資源)

Electromechanically active polymersa concise reference / by: (書目-電子資源)

Refractive indices of solids by: (書目-電子資源)

Nanoclay reinforced polymer compositesnanocomposites and bionanocomposites / by: (書目-電子資源)

Physics and mechanics of primary well cementing by: (書目-電子資源)

Electrochemistry and corrosion science by: (書目-電子資源)

Handbook of maleic anhydride based materialssyntheses, properties and applications / by: (書目-電子資源)

Phosphors, up conversion nano particles, quantum dots and their applications.Volume 2 by: (書目-電子資源)

Rare metal technology 2016proceedings of a symposium sponsored by the Hydrometallurgy and Electrometallurgy Commitee and the Extraction & Processing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Rewas 2016towards materials resource sustainability : proceedings of a symposium sponsored by the Recycling and Environmental Technologies Committee, the Materials and Society Committee, the Extraction & Processing Division, and the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016)sponsored by the Advanced Characterization, Testing, and Simulation Committee of the Structural Materials Division of the Minerals, Metals & Materials Society (TMS), held July 17-21, 2016 Omni William Penn Hotel, Pittsburgh, Pennsylvania, USA / by: (書目-電子資源)

7th International Symposium on High-Temperature Metallurgical Processingproceedings of a symposium sponsored by the Pyrometallurgy Committee of the Extraction and Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016 145th Annual Meeting & Exhibition, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Friction stir welding and processing VIIproceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) ; held during the TMS 2013 Annual Meeting & Exhibition San Antonio, Texas USA March 3-7, 2013 / by: (書目-電子資源)

EPD Congress 2016proceedings of symposia sponsored by the Extraction & Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Magnesium technology 2016proceeding of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Advances in the science and engineering of casting solidificationan MPMD Symposium Honoring Doru Michael Stefanescu : proceedings of a symposium sponsored by the Materials Processing & Manufacturing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Florida, USA / by: (書目-電子資源)

3D MSproceedings of the 2nd International Congress on 3D Materials Science : held by June 29-July 2, 2014, L'Imperial Palace, Annecy, France / by: (書目-電子資源)

TMS 2015144th Annual Meeting & Exhibition : supplemental proceedings / by: (書目-電子資源)

Shape casting5th International Symposium 2014 : by: (書目-電子資源)

Light metals 2014proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2014 Annual Meeting & Exhibition, February 16-20, 2014, San Diego, California, USA / by: (書目-電子資源)

Ni-Co 2013proceedings of symposium sponsored by the TMS Extraction & Processing Division, TMS High Temperature Alloys Committee, and the Metallurgy and Materials Society of the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) : held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (書目-電子資源)

Magnesium technology 2013proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (書目-電子資源)

Light metals 2011proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA, February 27-March 3, 2011 / by: (書目-電子資源)

The production and processing of inorganic materials by: (書目-電子資源)

Shape casting6th International Symposium : proceedings of a symposium sponsored by the Aluminum Committee of the Light Metals Division and the Solidification Committee of the Materials Processing & Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Friction stir welding and processing VIIIproceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Light metals 2012proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2012 Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012 / by: (書目-電子資源)

Energy technology 2016carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dixoide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (書目-電子資源)

Magnesium technology 2015proceedings of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Rare metal technology 2015proceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Essential readings in light metals.Volume 4,Electrode technology for aluminum production by: (書目-電子資源)

Magnesium technology 2012proceedings of symsposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) ; held during TMS 2012 Annual Meeting & Exhibition, Orlando, Flordia, USA, March 11-15, 2012 / by: (書目-電子資源)

Diffusion in solids by: (書目-電子資源)

Characterization of minerals, metals, and materials 2016proceedings of a symposium sponsored by the Materials Characterization Committee of the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

EPD Congress 2015proceedings of a symposia sponsored by the Extraction & Processing Division (EPD) of The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

6th International Symposium on High-Temperature Metallurgical Processingproceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Energy technology 2015carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dioxide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (書目-電子資源)

Magnesium technology 2011proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA February 27-March 3, 2011 / by: (書目-電子資源)

Essential readings in light metals.Volume 3,Cast shop for aluminum production by: (書目-電子資源)

Celebrating the megascaleproceedings of the Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson : proceedings of a symposium sponsored by the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2014, 143rd Annual Meeting & Exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA / by: (書目-電子資源)

TMS 2014143rd Annual Meeting & Exhibition : Annual meeting supplemental proceedings / by: (書目-電子資源)

Fatigue of materials IIIadvances and emergencies in understanding : proceedings of the third biennial symposium ; sponsored by The Minerals, Metals & Materials Society (TMS) and ASM International held during Materials Science & Technology 2014 (MS&T'14), October 12-16, 2014 in Pittsburgh, Pennsylvania / by: (書目-電子資源)

Drying, roasting, and calcining of mineralsproceedings of a symposium sponsored by The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Light metals 2015proceedings of the symposia sponsored by the TMS Alumnium Committee at the TMS 2015 Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Light metals 2016proceedings of the symposia sponsored by the Aluminum Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

TMS 2016145th Annual Meeting & Exhibition : supplemental proceedings / by: (書目-電子資源)

Proceedings of the 1st International Conference on 3D Materials Scienceheld July 8-12, 2012, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, USA / by: (書目-電子資源)

REWAS 2013enabling materials resource sustainability : proceesdings of the symposium, REWAS 2013: enabling materials resource sustaunability, sponsored by the EPD-LMD Recycling and Environmental Technology Committee and the TMS Materials and Society Committee; and the symposium, Battery Recycling, sponsored by the EMPMD Energy Conversion and Storage Committee and the EPD-LMD Recycling and Environmental Technology Committee ; held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Tex by: (書目-電子資源)

Proceedings of the TMS Middle EastMediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015) : held January 11-14, 2015, Doha, Qatar / by: (書目-電子資源)

Engineering solutions for sustainabilitymaterials and resources II : held at the TMS 2015 Annual Meeting, Orlando, Florida, USA, March 18-19, 2015 / by: (書目-電子資源)

Essential readings in light metals.Volume 1,Alumina and bauxite by: (書目-電子資源)

Advances in molten slags, fluxes, and saltsproceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016 : sponsored by Extraction & Processing Division and Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) ; held May 22-25, 2016, Seattle Grand Hyatt, Seattle, Washington, USA / by: (書目-電子資源)

Essential readings in light metals.Volume 2,Aluminum reduction technology by: (書目-電子資源)

PRICM 8proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing : sponsored by The Chinese Society for Metals (CSM), The Japan Institute of Metals (JIM), The Korean Institute of Metals and Materials (KIM), Materials Australia (MA), and the Minerals, Metals & Materials Society (TMS) ; held August 4-9, 2013, at the Hilton Waikoloa Village in Waikoloa, Hawaii, USA / by: (書目-電子資源)

Energy Materials 2014conference proceedings : November 4-6, 2014, Xi'an, Shaanxi Province, China / by: (書目-電子資源)

HSLA steels 2015, microalloying 2015 & offshore engineering steels 2015conference proceedings, held November 11-13th, 2015, Hangzhou, Zhejiang Province, China / by: (書目-電子資源)

Large-scale production of paper-based Li-ion cells by: (書目-電子資源)

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems.proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /Volume 9 by: (書目-電子資源)

Mechanics of composite and multi-functional materials.proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /Volume 7 by: (書目-電子資源)

Inorganic scintillators for detector systemsphysical principles and crystal engineering / by: (書目-電子資源)

Programming phase-field modeling by: (書目-電子資源)

Materials, energy and environment engineeringselect proceedings of ICACE 2015 / by: (書目-電子資源)

Engineering applications of nanotechnologyfrom energy to drug delivery / by: (書目-電子資源)

Models, simulation, and experimental issues in structural mechanics by: (書目-電子資源)

Proceedings of the IV Advanced Ceramics and Applications Conference by: (書目-電子資源)

Fillers for polymer applications by: (書目-電子資源)

Charge-trapping non-volatile memories.Volume 2,Emerging materials and structures by: (書目-電子資源)

Applications of process engineering principles in materials processing, energy and environmental technologiesan EPD symposium in honor of Professor Ramana G. Reddy / by: (書目-電子資源)

Mechanical and creep behavior of advanced materialsa SMD symposium honoring Professor K. Linga Murty / by: (書目-電子資源)

8th International Symposium on High-Temperature Metallurgical Processing by: (書目-電子資源)

Characterization of minerals, metals, and materials 2017 by: (書目-電子資源)

TMS 2017146th Annual Meeting & Exhibition Supplemental Proceedings / by: (書目-電子資源)

Light metals 2017 by: (書目-電子資源)

Materials processing fundamentals 2017 by: (書目-電子資源)

Proceedings of the 3rd Pan American Materials Congress by: (書目-電子資源)

Friction stir welding and processing IX by: (書目-電子資源)

Magnesium technology 2017 by: (書目-電子資源)

Submicron porous materials by: (書目-電子資源)

Basic thermochemistry in materials processing by: (書目-電子資源)

Green biocompositesdesign and applications / by: (書目-電子資源)

Mixed convection in fluid superposed porous layers by: (書目-電子資源)

Composite materialsprocessing, applications, characterizations / by: (書目-電子資源)

Phosphors, up conversion nano particles, quantum dots and their applications.Volume 1 by: (書目-電子資源)

Material parameter identification and inverse problems in soft tissue biomechanics by: (書目-電子資源)

Solutions manual to accompany Transport phenomena in materials processing by: (書目-電子資源)

CFD modeling and simulation in materials processing 2016proceedings of a symposium sponsored by the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th annual meeting & exhibition, Februrary 14-18, Downton Nashville, Tennessee Music City Center / by: (書目-電子資源)

Light metals 2013proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA March 3-7, 2013 / by: (書目-電子資源)

Materials design and applications by: (書目-電子資源)

Electro-chemo-mechanics of solids by: (書目-電子資源)

Energy materials 2017 by: (書目-電子資源)

Creep in ceramics by: (書目-電子資源)

International Digital Imaging Correlation Societyproceedings of the first Annual Conference, 2016 / by: (書目-電子資源)

Non-traditional micromachining processesfundamentals and applications / by: (書目-電子資源)

Bending behavior of thermoplastic composite sheetsviscoelasticity and temperature dependency in the draping process / by: (書目-電子資源)

Wave dynamics and composite mechanics for microstructured materials and metamaterials by: (書目-電子資源)

Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) by: (書目-電子資源)

Mechanics for materials and technologies by: (書目-電子資源)

On the time and temperature dependent behaviour of laminated amorphous polymers subjected to low-velocity impact by: (書目-電子資源)

Protection of materials and structures from the space environmentICPMSE-11 / by: (書目-電子資源)

Polymer-engineered nanostructures for advanced energy applications by: (書目-電子資源)

Novel Bismuth-Oxyhalide-based materials and their applications by: (書目-電子資源)

Ultrathin carbon-based overcoats for extremely high density magnetic recording by: (書目-電子資源)

Smart and multifunctional concrete toward sustainable infrastructures by: (書目-電子資源)

The theory of laser materials processingheat and mass transfer in modern technology / by: (書目-電子資源)

Deformation and fracture behaviour of polymer materials by: (書目-電子資源)

Raw materials substitution sustainability by: (書目-電子資源)

Applied metallurgy and corrosion controla handbook for the petrochemical industry / by: (書目-電子資源)

Ceramic membranes applied in separation processes by: (書目-電子資源)

The political economy of Russian aluminiumbetween the dual state and global markets / by: (書目-電子資源)

Wood polymer nanocompositeschemical modifications, properties and sustainable applications / by: (書目-電子資源)

Advances in nanomaterialsfundamentals, properties and applications / by: (書目-電子資源)

Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applicationspresented at the XXV International Materials Research Congress - Cancun 2016 / by: (書目-電子資源)

Physical test methods for elastomers by: (書目-電子資源)

Electrochemistry for corrosion fundamentals by: (書目-電子資源)

Carbonthe black, the gray and the transparent / by: (書目-電子資源)

Frontiers in materials processing, applications, research and technologyselect proceedings of FiMPART 2015 / by: (書目-電子資源)

Bionanocomposites for packaging applications by: (書目-電子資源)

Ferroic functional materialsexperiment, modeling and simulation / by: (書目-電子資源)

Spin dynamics and damping in ferromagnetic thin films and nanostructures by: (書目-電子資源)

Proceedings of the International Conference on Microplastic Pollution in the Mediterranean Sea by: (書目-電子資源)

China's high-speed rail technologyan international perspective / by: (書目-電子資源)

Materials processing fundamentals 2018 by: (書目-電子資源)

Characterization of minerals, metals, and materials 2018 by: (書目-電子資源)

9th International Symposium on High-Temperature Metallurgical processing by: (書目-電子資源)

Magnesium technology 2018 by: (書目-電子資源)

Metal-matrix composites innovations, advances and applicationsan SMD Symposium in Honor of William C. Harrigan, Jr. / by: (書目-電子資源)

TMS 2018 147th Annual Meeting & Exhibition supplemental proceedings by: (書目-電子資源)

Light Metals 2018 by: (書目-電子資源)

Advanced high strength steelprocessing and applications / by: (書目-電子資源)

Shock and materials by: (書目-電子資源)

Proceedings of the International Conference on Martensitic TransformationsChicago / by: (書目-電子資源)

Modeling, design, construction, and operation of power generators with solid oxide fuel cellsfrom single cell to complete power system / by: (書目-電子資源)

Renewable and sustainable materials in green technology by: (書目-電子資源)

Magnetostatic modelling of thin layers using the method of moments and its implementation in Octave/Matlab by: (書目-電子資源)

Advanced functional materialsproceedings of Chinese Materials Conference 2017 / by: (書目-電子資源)

Materials that movesmart materials, intelligent design / by: (書目-電子資源)

Progress in materials science and engineering by: (書目-電子資源)

Mechanical properties and working of metals and alloys by: (書目-電子資源)

Fire retardancy behavior of polymer/clay nanocomposites by: (書目-電子資源)

Handbook of sol-gel science and technologyprocessing, characterization and applications / by: (書目-電子資源)

Advanced manufacturing and materials scienceselected extended papers of ICAMMS 2018 / by: (書目-電子資源)

The selected models of the mesostructure of compositespercolation, clusters, force fields / by: (書目-電子資源)

Phase equilibria diagrams of high-temperature non-oxide ceramics by: (書目-電子資源)

Carbon and metal oxides based nanomaterials for flexible high performance asymmetric supercapacitors by: (書目-電子資源)

Computer algebra and materials physicsa practical guidebook to group theoretical computations in materials science / by: (書目-電子資源)

Acetylene and its polymers150+ years of history / by: (書目-電子資源)

Springer handbook of materials data by: (書目-電子資源)

Materials handbooka concise desktop reference / by: (書目-電子資源)

Powerful pulsed plasma generatorsresearch and application / by: (書目-電子資源)

Doped-ceria electrolytessynthesis, sintering and characterization / by: (書目-電子資源)

Extraction 2018proceedings of the First Global Conference on Extractive Metallurgy / by: (書目-電子資源)

Physical metallurgy of cast irons by: (書目-電子資源)

Industrial applications of poly(lactic acid) by: (書目-電子資源)

Materials chemistry by: (書目-電子資源)

Handbook of materials characterization by: (書目-電子資源)

Corrosion science and engineering by: (書目-電子資源)

Materials discovery and designby means of data science and optimal learning / by: (書目-電子資源)

Solidification processing of metallic alloys under external fields by: (書目-電子資源)

Advances in polymer sciences and technologyselect papers from APA 2017 / by: (書目-電子資源)

Polymer reaction engineering of dispersed systems.Volume I by: (書目-電子資源)

Polymer reaction engineering of dispersed systems.Volume II by: (書目-電子資源)

3D printing and additive manufacturing technologies by: (書目-電子資源)

Strengthening and Joining by Plastic Deformationselect papers from AIMTDR 2016 / by: (書目-電子資源)

Cascade use in technologies 2018Internationale Konferenz zur Kaskadennutzung und Kreislaufwirtschaft - Oldenburg 2018 / by: (書目-電子資源)

Advances in materials and metallurgyselect proceedings of ICEMMM 2018 / by: (書目-電子資源)

Hot stamping of ultra high-strength steelsfrom a technological and business perspective / by: (書目-電子資源)

Advances in manufacturing processesselect proceedings of ICEMMM 2018 / by: (書目-電子資源)

Reliability of selective laser melted AlSi12 alloy for quasistatic and fatigue applications by: (書目-電子資源)

Pipeline steels for sour service by: (書目-電子資源)

Nano-energetic materials by: (書目-電子資源)

Die-attach materials for high temperature applications in microelectronics packagingmaterials, processes, equipment, and reliability / by: (書目-電子資源)

Shape casting7th International Symposium Celebrating Prof. John Campbell's 80th Birthday / by: (書目-電子資源)

Advanced real time imaging IIcutting-edge techniques in materials science studies / by: (書目-電子資源)

Materials processing fundamentals 2019 by: (書目-電子資源)

Bio-based polymers and nanocompositespreparation, processing, properties and performance / by: (書目-電子資源)

Advances in thin films, nanostructured materials, and coatingsselected papers from the 2018 International Conference on "Nanomaterials: Applications & Properties" / by: (書目-電子資源)

Physics and techniques of ceramic and polymeric materialsproceedings of Chinese Materials Conference 2018 / by: (書目-電子資源)

Advances and challenges in structural engineeringproceedings of the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 : the Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (書目-電子資源)

Dynamic behavior of materials.proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /Volume 1 by: (書目-電子資源)

Friction stir welding and processing X by: (書目-電子資源)

10th International Symposium on High-Temperature Metallurgical Processing by: (書目-電子資源)

Magnesium technology 2019 by: (書目-電子資源)

REWAS 2019manufacturing the circular materials economy / by: (書目-電子資源)

Light metals 2019 by: (書目-電子資源)

Spark plasma sintering of materialsadvances in processing and applications / by: (書目-電子資源)

Green materials engineeringan EPD Symposium in honor of Sergio Monteiro / by: (書目-電子資源)

TMS 2019 148th annual meeting & exhibition supplemental proceedings by: (書目-電子資源)

Characterization of minerals, metals, and materials 2019 by: (書目-電子資源)

Handbook of ecomaterials by: (書目-電子資源)

Self-healing nanotextured vascular engineering materials by: (書目-電子資源)

Polypropylene handbookmorphology, blends and composites / by: (書目-電子資源)

Highway engineering composite material and its application by: (書目-電子資源)

Willemite-based glass ceramic doped by different percentage of erbium oxide and sintered in temperature of 500-1100Cphysical and optical properties / by: (書目-電子資源)

Novel aspects of diamondfrom growth to applications / by: (書目-電子資源)

Vibration analysis of functionally graded piezoelectric actuators by: (書目-電子資源)

Semiconducting metal oxides for gas sensing by: (書目-電子資源)

Materials design and applications.II by: (書目-電子資源)

Advances in materials, mechanical and industrial engineeringselected contributions from the First International Conference on Mechanical Engineering, Jadavpur University, Kolkata, India / by: (書目-電子資源)

Handbook of nonlocal continuum mechanics for materials and structures by: (書目-電子資源)

Advanced engineering for processes and technologies by: (書目-電子資源)

Near net shape manufacturing processes by: (書目-電子資源)

Anisotropic metal chalcogenide nanomaterialssynthesis, assembly, and applications / by: (書目-電子資源)

Micro-electrical discharge machining processestechnologies and applications / by: (書目-電子資源)

Innovation in materials science and engineeringproceedings of ICEMIT 2017.Volume 2 / by: (書目-電子資源)

Handbook of mechanics of materials by: (書目-電子資源)

High-entropy materialsa brief introduction / by: (書目-電子資源)

Mechanical fatigue of metalsexperimental and simulation perspectives / by: (書目-電子資源)

Characterisation of turbulent duct flowsexperiments and direct numerical simulations / by: (書目-電子資源)

Sustainable lignin for carbon fibersprinciples, techniques and applications / by: (書目-電子資源)

Nanoelectronic materialsfundamentals and applications / by: (書目-電子資源)

Functional textiles and clothing by: (書目-電子資源)

Materials and manufacturing processes by: (書目-電子資源)

Computational homogenization of heterogeneous materials with finite elements by: (書目-電子資源)

Marine-derived biomaterials for tissue engineering applications by: (書目-電子資源)

Trends in materials engineeringselect proceedings of ICFTMM 2018 / by: (書目-電子資源)

Mechanical properties of silicon based compoundssilicides / by: (書目-電子資源)

Clean ironmaking and steelmaking processesefficient technologies for greenhouse emissions abatement / by: (書目-電子資源)

Particles in contactmicro mechanics, micro process dynamics and particle collective / by: (書目-電子資源)

Progress in engineering technologyautomotive, energy generation, quality control and efficiency / by: (書目-電子資源)

Structural materialsproperties and selection / by: (書目-電子資源)

IRC-SET 2018proceedings of the 4th IRC Conference on Science, Engineering and Technology / by: (書目-電子資源)

Surface engineering of graphene by: (書目-電子資源)

Nanoengineering materials for biomedical uses by: (書目-電子資源)

Electronic waste and printed circuit board recycling technologies by: (書目-電子資源)

Graphene functionalization strategiesfrom synthesis to applications / by: (書目-電子資源)

Properties of fresh and hardened concrete containing supplementary cementitious materialsstate-of-the-art report of the RILEM Technical Committee 238-SCM, Working Group 4 / by: (書目-電子資源)

Advances in sustainable polymersprocessing and applications / by: (書目-電子資源)

Advanced functional materials from nanopolysaccharides by: (書目-電子資源)

Light weighting for defense, aerospace, and transportation by: (書目-電子資源)

Innovations and breakthroughs in the gold and silver industriesconcepts, applications and future trends / by: (書目-電子資源)

A practical guide to surface metrology by: (書目-電子資源)

Thermal properties of bio-based polymers by: (書目-電子資源)

Deformation processes in TRIP/TWIP steelsin-situ characterization techniques / by: (書目-電子資源)

Ligninbiosynthesis and transformation for industrial applications / by: (書目-電子資源)

Proceedings of the 2nd International Conference on Microplastic Pollution in the Mediterranean Sea by: (書目-電子資源)

Revolutionizing aircraft materials and processes by: (書目-電子資源)

Integrated computational materials engineering (ICME)advancing computational and experimental methods / by: (書目-電子資源)

Surface engineering of modern materials by: (書目-電子資源)

Wood & fire safetyproceedings of the 9th International Conference on Wood & Fire Safety 2020 / by: (書目-電子資源)

RF power semiconductor generator application in heating and energy utilization by: (書目-電子資源)

Molecular nanomagnetsfundamental understanding / by: (書目-電子資源)

Energy Technology 2020recycling, carbon dioxide management, and other technologies / by: (書目-電子資源)

Aquatic biopolymersunderstanding their industrial significance and environmental implications / by: (書目-電子資源)

Rare Metal Technology 2020 by: (書目-電子資源)

11th International Symposium on High-Temperature Metallurgical Processing by: (書目-電子資源)

PbZn 20209th International Symposium on Lead and Zinc Processing / by: (書目-電子資源)

Light metals 2020 by: (書目-電子資源)

Thermophysical properties and measuring technique of Ge-Sb-Te alloys for phase change memory by: (書目-電子資源)

Materials processing fundamentals 2020 by: (書目-電子資源)

Green production of carbon nanomaterials in molten salts and applications by: (書目-電子資源)

Advances in powder and ceramic materials science by: (書目-電子資源)

Solid-state weldingfriction and friction stir welding processes / by: (書目-電子資源)

Advances in mechanical engineeringselect proceedings of ICRIDME 2018 / by: (書目-電子資源)

Vapor crystal growth and characterizationZnSe and related II-VI compound semiconductors / by: (書目-電子資源)

Plasticity, damage and fracture in advanced materials by: (書目-電子資源)

TMS 2020 149th Annual Meeting & Exhibition Supplemental proceedings by: (書目-電子資源)

Pineapple leaf fibersprocessing, properties and applications / by: (書目-電子資源)

Reference materials in measurement and technologyproceedings of the Third International Scientific Conference / by: (書目-電子資源)

Advanced materials for defensedevelopment, analysis and applications / by: (書目-電子資源)

Corrosion processessensing, monitoring, data analytics, prevention/protection, diagnosis/prognosis and maintenance strategies / by: (書目-電子資源)

Emerging research in science and engineering based on advanced experimental and computational strategies by: (書目-電子資源)

Mechanics of composite and multi-functional materials.proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics /Volume 5 by: (書目-電子資源)

iMEC-APCOMS 2019proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems / by: (書目-電子資源)

Aerospace alloys by: (書目-電子資源)

Advances in additive manufacturing and joiningproceedings of AIMTDR 2018 / by: (書目-電子資源)

ICAF 2019structural integrity in the age of additive manufacturing : proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, June 2-7, 2019, Krakow, Poland / by: (書目-電子資源)

Interface influence on moisture transport in building componentsthe wetting process / by: (書目-電子資源)

Shape memory polymers, blends and compositesadvances and applications / by: (書目-電子資源)

Engineering design applications IIstructures, materials and processes / by: (書目-電子資源)

Bismuth-ferrite-based electrochemical supercapacitors by: (書目-電子資源)

Austenitic TRIP/TWIP steels and steel-zirconia compositesdesign of tough, transformation-strengthened composites and structures / by: (書目-電子資源)

Advances in materials science and engineeringselect proceedings of ICFMMP 2019 / by: (書目-電子資源)

Additive manufacturing processes by: (書目-電子資源)

Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced MaterialsICE-SEAM 2019, 16-17 October 2019, Surakarta, Indonesia / by: (書目-電子資源)

Progress in engineering technology II by: (書目-電子資源)

The world of materials by: (書目-電子資源)

Introduction to refractories for iron- and steelmaking by: (書目-電子資源)

Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (書目-電子資源)

Architecting robust co-design of materials, products, and Manufacturing Processes by: (書目-電子資源)

Advances in Materials Processingselect proceedings of ICFMMP 2019 / by: (書目-電子資源)

Biointerface engineeringprospects in medical diagnostics and drug delivery / by: (書目-電子資源)

Mechanics of metamaterials with negative parameters by: (書目-電子資源)

Wooden facades and fire safetyeffects of joint type on ignition behaviour / by: (書目-電子資源)

Platinum monolayer electrocatalysts by: (書目-電子資源)

Fibers for technical textiles by: (書目-電子資源)

Handbook of engineering practice of materials and corrosion by: (書目-電子資源)

Mold and core sands in metalcastingchemistry and ecology : sustainable development / by: (書目-電子資源)

Phase transformation in metalsmathematics, theory and practice / by: (書目-電子資源)

CT scan generated material twins for composites manufacturing in Industry 4.0 by: (書目-電子資源)

Handbook of advanced ceramics and compositesdefense, security, aerospace and energy applications / by: (書目-電子資源)

Self-healing and self-recovering hydrogels by: (書目-電子資源)

Monodisperse highly ordered and polydisperse biobased solid foams by: (書目-電子資源)

Analysis of glass panels subjected to blast load by: (書目-電子資源)

Basic quantum mechanics by: (書目-電子資源)

Proceedings of the 4th International Symposium on Materials and Sustainable Development.Volume 1,Nano technology and advanced materials by: (書目-電子資源)

Engineering of thermoplastic elastomer with graphene and other anisotropic nanofillers by: (書目-電子資源)

Proceedings of the 4th International Symposium on Materials and Sustainable Development.Volume 2,Waste recycling and environment by: (書目-電子資源)

Date palm fiber compositesprocessing, properties and applications / by: (書目-電子資源)

An insight into metal based foamsprocessing, properties and applications / by: (書目-電子資源)

Geopolymer and geopolymer matrix composites by: (書目-電子資源)

Advances in sustainable polymerssynthesis, fabrication and characterization / by: (書目-電子資源)

Revolution of perovskitesynthesis, properties and applications / by: (書目-電子資源)

A virtual testing approach for honeycomb sandwich panel joints in aircraft interior by: (書目-電子資源)

Advances in polymer processing 2020proceedings of the International Symposium on Plastics Technology / by: (書目-電子資源)

Heatmetrythe science and practice of heat flux measurement / by: (書目-電子資源)

Mechanical behavior and fracture of engineering materials by: (書目-電子資源)

Superconductivityfrom materials science to practical applications / by: (書目-電子資源)

Environmental remediation through carbon based nano composites by: (書目-電子資源)

Adaptronics - smart structures and materials by: (書目-電子資源)

Laser cladding of metals by: (書目-電子資源)

Novel lanthanum zirconate-based thermal barrier coatings for energy applications by: (書目-電子資源)

Phenolic polymers based composite materials by: (書目-電子資源)

Bamboo fiber compositesprocessing, properties and applications / by: (書目-電子資源)

Multiscale solid mechanicsstrength, durability, and dynamics / by: (書目-電子資源)

Advances in mechanical processing and designselect proceedings of ICAMPD 2019 / by: (書目-電子資源)

Structural health monitoring system for synthetic, hybrid and natural fiber composites by: (書目-電子資源)

Tribological applications of composite materials by: (書目-電子資源)

Materials research and applicationsselect papers from JCH8-2019 / by: (書目-電子資源)

Graphene based biopolymer nanocomposites by: (書目-電子資源)

High-performance ferrous alloys by: (書目-電子資源)

Functional textiles and clothing 2020 by: (書目-電子資源)

Machining and machinability of fiber reinforced polymer composites by: (書目-電子資源)

Sustainable issues in infrastructure engineeringthe official 2020 publication of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (書目-電子資源)

Strength of materials by: (書目-電子資源)

Contemporary nanomaterials in material engineering applications by: (書目-電子資源)

Eco-friendly adhesives for wood and natural fiber compositescharacterization, fabrication and applications / by: (書目-電子資源)

Computational materials, chemistry, and biochemistryfrom bold initiatives to the last mile : in honor of William A. Goddard's contributions to science and engineering.Volume 2 / by: (書目-電子資源)

Biocomposite materialsdesign and mechanical properties characterization / by: (書目-電子資源)

Innovations in everyday engineering materials by: (書目-電子資源)

Advances in hybrid conducting polymer technology by: (書目-電子資源)

Collagen biografts for tunable drug delivery by: (書目-電子資源)

Carbide in special steelformation mechanism and control technology / by: (書目-電子資源)

Crosslinkable polyethylene based blends and nanocomposites by: (書目-電子資源)

Electrochemical methods of nanostructure preparation by: (書目-電子資源)

Graphene and nanoparticles hybrid nanocompositesfrom preparation to applications / by: (書目-電子資源)

Comprehensive utilization of magnesium slag by pidgeon process by: (書目-電子資源)

Crosslinkable polyethylenemanufacture, properties, recycling, and applications / by: (書目-電子資源)

Inert anodes for aluminum electrolysis by: (書目-電子資源)

Dynamic behavior of materials.proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /Volume 1 by: (書目-電子資源)

Mechanics of composite, hybrid and multifunctional materials.proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /Volume 6 by: (書目-電子資源)

Advances in engineering materialsselect proceedings of FLAME 2020 / by: (書目-電子資源)

Cold spray additive manufacturingfrom fundamentals to applications / by: (書目-電子資源)

Classical and relativistic rational extended thermodynamics of gases by: (書目-電子資源)

Advances in design, simulation and manufacturing IVproceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (書目-電子資源)

Advances in design, simulation and manufacturing IVproceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.Volume 2,Mechanical and chemical engineering / by: (書目-電子資源)

Handbook of spine technology by: (書目-電子資源)

Energy-sustainable advanced materials by: (書目-電子資源)

Data technology in materials modelling by: (書目-電子資源)

Artificial intelligence for materials science by: (書目-電子資源)

Advances in manufacturing engineering and materials IIproceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), 21-25 June, 2021, Novy Smokovec, Slovakia / by: (書目-電子資源)

Fracture, fatigue, failure and damage evolution.proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /Volume 3 by: (書目-電子資源)

Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020) by: (書目-電子資源)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020).Volume I by: (書目-電子資源)

Challenges in mechanics of time dependent materials.proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /Volume 2 by: (書目-電子資源)

Ammonothermal synthesis and crystal growth of nitrideschemistry and technology / by: (書目-電子資源)

Friction stir welding and processing XI by: (書目-電子資源)

Materials with extreme wetting propertiesmethods and emerging industrial applications / by: (書目-電子資源)

Ni-Co 2021the 5th International Symposium on Nickel and Cobalt / by: (書目-電子資源)

Materials design and applications.III by: (書目-電子資源)

Materials engineering--from ideas to practicean EPD Symposium in honor of Jiann-Yang Hwang / by: (書目-電子資源)

Electrospinning for advanced energy storage applications by: (書目-電子資源)

Materials, design, and manufacturing for sustainable environmentselect proceedings of ICMDMSE 2020 / by: (書目-電子資源)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020).Volume II by: (書目-電子資源)

Intelligent quality assessment of railway switches and crossings by: (書目-電子資源)

Physical chemistry of metallurgical processes by: (書目-電子資源)

Iron-based superconducting thin films by: (書目-電子資源)

Structural materialsbehavior, testing and evaluation / by: (書目-電子資源)

Ten materials that shaped our world by: (書目-電子資源)

Handbook of nanomaterials and nanocomposites for energy and environmental applications by: (書目-電子資源)

New approaches of geotechnical engineeringsoil characterization, sustainable materials and numerical simulation : proceedings of the 6th GeoChina International Conference on Civil & Transportation Infrastructures : from Engineering to Smart & Green Life Cycle Solutions -- Nanchang, China, 2021 / by: (書目-電子資源)

Advances in machining of composite materialsconventional and non-conventional processes / by: (書目-電子資源)

Advances in materials processing and manufacturing applicationsproceedings of iCADMA 2020 / by: (書目-電子資源)

Advances in mechanical engineeringselect proceedings of CAMSE 2020 / by: (書目-電子資源)

Physics and chemistry of Te and HgTe-based ternary semiconductor melts by: (書目-電子資源)

Limestone mining in India by: (書目-電子資源)

Manufacturing automotive components from sustainable natural fiber composites by: (書目-電子資源)

Fiberglass science and technologychemistry, characterization, processing, modeling, application, and sustainability / by: (書目-電子資源)

Practical approach to 3D weaving by: (書目-電子資源)

Thermal spray fundamentalsfrom powder to part / by: (書目-電子資源)

6th International Conference on Adhesive Bonding 2021selected contributions of AB 2021 / by: (書目-電子資源)

Handbook of laser micro- and nano-engineering by: (書目-電子資源)

High-entropy materialstheory, experiments, and applications / by: (書目-電子資源)

Resistive switchingoxide materials, mechanisms, devices and operations / by: (書目-電子資源)

Fundamentals of metal joiningprocesses, mechanism and performance / by: (書目-電子資源)

Advanced materialsan introduction to modern materials science / by: (書目-電子資源)

Hydrometallurgyfundamentals and applications / by: (書目-電子資源)

Impact damages of braided composites by: (書目-電子資源)

Advanced mems/nems fabrication and sensors by: (書目-電子資源)

Recent advances in manufacturing engineering and processesproceedings of ICMEP 2021 / by: (書目-電子資源)

Local and nonlocal micromechanics of heterogeneous materials by: (書目-電子資源)

Advancement in materials, manufacturing and energy engineering.select proceedings of ICAMME 2021 /Vol. I by: (書目-電子資源)

High-performance composite structuresadditive manufacturing and processing / by: (書目-電子資源)

Mechanics of composite, hybrid and multifunctional materials, fracture, fatigue, failure and damage evolution.proceedings of the 2021 Annual Conference on Experimental and Applied Mechanics /Volume 3 by: (書目-電子資源)

Smelter grade alumina from bauxitehistory, best practices, and future challenges / by: (書目-電子資源)

Theory and technology of roll stamping by: (書目-電子資源)

REWAS 2022developing tomorrow's technical cycles.(Volume I) / by: (書目-電子資源)

Characterization of minerals, metals, and materials 2022 by: (書目-電子資源)

Furnace tapping 2022 by: (書目-電子資源)

12th International Symposium on High-Temperature Metallurgical Processing by: (書目-電子資源)

Challenges in mechanics of time dependent materials, mechanics of biological systems and materials & micro-and nanomechanics.proceedings of the 2021 Annual Conference & Exposition on Experimental and Applied Mechanics /Volume 2 by: (書目-電子資源)

Advances in mechanical and materials technologyselect proceedings of EMSME 2020.Volume 2 / by: (書目-電子資源)

COVID-19 pandemicresearch and development activities from modeling to realization / by: (書目-電子資源)

Advancement in materials, manufacturing and energy engineering.select proceedings of ICAMME 2021 /Vol. II by: (書目-電子資源)

In situ characterization methodology for the design and analysis of composite pressure vessels by: (書目-電子資源)

Hydrogen in engineering metallic materialsfrom atomic-level interactions to mechanical properties / by: (書目-電子資源)

Characterization of nanomaterials in liquid disperse systems by: (書目-電子資源)

Carbon composite catalystspreparation, structural and morphological property and applications / by: (書目-電子資源)

Materials, structures and manufacturing for aircraft by: (書目-電子資源)

Silicon sensors and actuatorsthe feynman roadmap / by: (書目-電子資源)

Advances in manufacturing III.Volume 4,Measurement and control systems: research and technology innovations, Industry 4.0 by: (書目-電子資源)

Proceedings of the 7th International Conference on Nanomanufacturing (nanoMan2021) by: (書目-電子資源)

Precision forging technology and equipment for aluminum alloy by: (書目-電子資源)

Hydrogen assisted direct reduction of iron oxides by: (書目-電子資源)

Advances in mechanical engineering and material scienceselect proceedings of ICAMEMS-2022 / by: (書目-電子資源)

Advances in manufacturing III.Volume 1,Mechanical engineering: research and technology innovations, Industry 4.0 by: (書目-電子資源)

Recent trends in design, materials and manufacturingselected proceedings of ICRADMM 2020 / by: (書目-電子資源)

Additive, subtractive, and hybrid technologiesrecent innovations in manufacturing / by: (書目-電子資源)

Mechanism-based assessment of structural and functional behavior of sustainable cottonid by: (書目-電子資源)

Electron beam wire deposition technology and its application by: (書目-電子資源)

Advances in design, simulation and manufacturing Vproceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland.Volume 1,Manufacturing and materials engineering / by: (書目-電子資源)

Recent advances in materials and modern manufacturingselect proceedings of ICAMMM 2021 / by: (書目-電子資源)

Advanced transdisciplinary engineering and technology by: (書目-電子資源)

2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials by: (書目-電子資源)

TMS 2022 151st annual meeting & exhibitionsupplemental proceedings / by: (書目-電子資源)

Metal-matrix compositesadvances in processing, characterization, performance and analysis / by: (書目-電子資源)

Topological states for new modes of information storage and transfera survey of the status of the discovery of the majorana modes in the solid state / by: (書目-電子資源)

Lignocellulosic fiberssustainable biomaterials for green composites / by: (書目-電子資源)

Bio-fiber reinforced composite materialsmechanical, thermal and tribological properties / by: (書目-電子資源)

Advances in nanocomposite materials for environmental and energy harvesting applications by: (書目-電子資源)

Welding simulations using ABAQUSa practical guide for engineers / by: (書目-電子資源)

Nondestructive testing and evaluation of fiber-reinforced composite structures by: (書目-電子資源)

Advancement in materials processing technologyselect proceedings of AMPT 2020 / by: (書目-電子資源)

Textile and fashion education internationalizationa promising discipline from Southeast Asia / by: (書目-電子資源)

Electron microscopy in science and engineering by: (書目-電子資源)

Advanced materials and engineering technologies by: (書目-電子資源)

Advanced engineering of materials through lasers by: (書目-電子資源)

Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia by: (書目-電子資源)

Novel lights sources beyond free electron lasers by: (書目-電子資源)

Flexible OLEDsfundamental and novel practical technologies / by: (書目-電子資源)

Future landscape of structural materials in India by: (書目-電子資源)

Reference materials in measurement and technologyproceedings of the fourth International Scientific Conference / by: (書目-電子資源)

Chitin and chitosanscience and engineering / by: (書目-電子資源)

Flexible metal forming technologiesprinciples, process and equipment / by: (書目-電子資源)

Premetered coating methodsattractiveness and limitations / by: (書目-電子資源)

Solid state engineering physics by: (書目-電子資源)

Advanced nanomaterials by: (書目-電子資源)

Fire hazards of electrical cables by: (書目-電子資源)

Theory and practice of thermal transient testing of electronic components by: (書目-電子資源)

Applications of high energy radiationssynthesis and processing of polymeric materials / by: (書目-電子資源)

Springer handbook of advanced catalyst characterization by: (書目-電子資源)

Chemical engineering principles and applications by: (書目-電子資源)

Advances in geoengineering, geotechnologies, and geoenvironment for earth systems and sustainable georesources managementproceedings of the 1st Conference on Georesources, Geomaterials, Geotechnologies and Geoenvironment (4GEO), Porto, 2019 / by: (書目-電子資源)

Proceeding of 5th International Conference on Advances in Manufacturing and Materials EngineeringICAMME 2022, 9-10 August, Kuala Lumpur, Malaysia / by: (書目-電子資源)

Advances in additive manufacturing and metal joiningproceedings of AIMTDR 2021 / by: (書目-電子資源)

Advances in design, simulation and manufacturing VI.proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6-9, 2023, High Tatras, Slovak Republic /Volume 2,Mechanical and materials engineering by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ICRAMERD 2022 / by: (書目-電子資源)

Dissimilar metal joining by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of FLAME 2022 / by: (書目-電子資源)

Progress in engineering technology V by: (書目-電子資源)

Epoxidised natural rubberproperties & applications / by: (書目-電子資源)

Structural integrity and monitoring for composite materials by: (書目-電子資源)

Friction stir welding and processing XII by: (書目-電子資源)

Fiber reinforced polymeric materials and sustainable structures by: (書目-電子資源)

Proceedings of the 2nd International Conference on Water Energy Food and Sustainability (ICoWEFS 2022) by: (書目-電子資源)

Crystallographic texture and group representations by: (書目-電子資源)

Recent advances in manufacturing engineering and processesproceedings of ICMEP 2022 / by: (書目-電子資源)

Manufacturing control of textile materialsoperational computerized non-contact methods / by: (書目-電子資源)

Proceedings of International Conference on Intelligent Manufacturing and AutomationICIMA 2022 / by: (書目-電子資源)

A two-dimensional piezoresistivity model for anisotropic materials and its application in self-sensing of carbon fiber reinforced plastics by: (書目-電子資源)

Physicochemical aspects of metal-organic frameworksa new class of coordinative materials / by: (書目-電子資源)

Advancements in materials science and technology led by women by: (書目-電子資源)

Resource recovery and recycling from waste metal dust by: (書目-電子資源)

Springer handbook of wood science and technology by: (書目-電子資源)

Thin filmsprocesses and characterization techniques / by: (書目-電子資源)

Key basic scientific problems on near-space vehicles by: (書目-電子資源)

Metal micro-droplet based 3D printing technology by: (書目-電子資源)

Materials design and applications IV by: (書目-電子資源)

Green-based nanocomposite materials and applications by: (書目-電子資源)

Multifunctional epoxy resinsself-healing, thermally and electrically conductive resins / by: (書目-電子資源)

Advanced manufacturing processes IVselected papers from the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), September 6-9, 2022, Odessa, Ukraine / by: (書目-電子資源)

Advances in mechanical and energy technologyselect proceedings of ICMET 2021 / by: (書目-電子資源)

Design and modeling of mechanical systems - Vproceedings of the 9th Conference on Design and Modeling of Mechanical Systems, CMSM'2021, December 20-22, 2021, Hammamet, Tunisia / by: (書目-電子資源)

Materials, design and manufacturing for sustainable environmentselect proceedings of ICMDMSE 2022 / by: (書目-電子資源)

Probability-based multi-objective optimization for material selection by: (書目-電子資源)

Proceedings of the 7th International Corrosion Prevention Symposium for Research ScholarsCORSYM 2021, November 2021 / by: (書目-電子資源)

Proceedings of the Munich Symposium on Lightweight Design 2021Tagungsband zum Münchner Leichtbauseminar 2021 / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ERCAM 2021 / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ICOME 2021 / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of CAMSE 2021 / by: (書目-電子資源)

Slag-steel reaction and control of inclusions in Al deoxidized special steel by: (書目-電子資源)

Recent trends in product design and intelligent manufacturing systemsselect proceedings of IPDIMS 2021 / by: (書目-電子資源)

Reinforced concretebasic theory and standards / by: (書目-電子資源)

Modern hydroforming technology by: (書目-電子資源)

Advances in functional and smart materialsselect proceedings of ICFMMP 2021 / by: (書目-電子資源)

Sustainable chemical, mineral and material processingselect proceedings of 74th Annual Session of Indian Institute of Chemical Engineers (CHEMCON-2021) / by: (書目-電子資源)

Minimum quantity lubrication machiningprocess analysis and analytical modeling / by: (書目-電子資源)

Recent developments in mechanics and designselect proceedings of INCOME 2021 / by: (書目-電子資源)

Road planning - freeways and country roads by: (書目-電子資源)

Emerging trends in mechanical and industrial engineeringselect proceedings of ICETMIE 2022 / by: (書目-電子資源)

Engineering design applications IVstructures, materials and processes / by: (書目-電子資源)

Multifunctional boron-nitride compositespreparation, properties and applications / by: (書目-電子資源)

Electroslag remelting towards clean steel by: (書目-電子資源)

Additive manufacturingdesign, processes and applications / by: (書目-電子資源)

Thin-walled composite protective structures for crashworthiness applicationsrecent advances and future developments / by: (書目-電子資源)

Semiconducting metal oxides for gas sensing by: (書目-電子資源)

Proceedings of the 3rd annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).Volume 1,Advanced materials and manufacturing technologies by: (書目-電子資源)

Proceedings of the 8th International Conference on Mechanical, Automotive and Materials EngineeringCMAME 2022, 16-18 December, Hanoi, Vietnam / by: (書目-電子資源)

Polymer 3D printing and 3D copying technology by: (書目-電子資源)

Advancement of science and technologymaterials and energy / by: (書目-電子資源)

Recent advances in materials and manufacturing technologyselect proceedings of ICAMMT 2022 / by: (書目-電子資源)

Engineered stabilitythe history of composite materials in the 19th and 20th Centuries / by: (書目-電子資源)

Modern optimization techniques for advanced machiningheuristic and metaheuristic techniques / by: (書目-電子資源)

Recent advances in intelligent manufacturingselect proceedings of ICAME 2022 / by: (書目-電子資源)

Advances in mechanics of materials for environmental and civil engineering by: (書目-電子資源)

Emerging trends in materials research and manufacturing processes by: (書目-電子資源)

Engineering design applications Vstructures, materials and processes / by: (書目-電子資源)

Nanomaterials based printed strain sensor for wearable health monitoring applications by: (書目-電子資源)

Recycled polymer blends and compositesprocessing, properties, and applications / by: (書目-電子資源)

Proceedings of the 6th Asia Pacific Conference on Manufacturing Systems and 4th International Manufacturing Engineering ConferenceAPCOMS-IMEC 2022, Surakarta, Indonesia / by: (書目-電子資源)

Proceedings of the International Symposium on Lightweight and Sustainable Polymeric Materials (LSPM23) by: (書目-電子資源)

Selected papers from ICIR EUROINVENT - 2023International Conference on Innovative Research / by: (書目-電子資源)

Proceedings of the 3rd International Conference on Microplastic Pollution in the Mediterranean Sea by: (書目-電子資源)

Progress in continuum mechanics by: (書目-電子資源)

Proceedings of the 28th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2022ICEC28-ICMC 2022, Hangzhou, China / by: (書目-電子資源)

70 years of China's bridges by: (書目-電子資源)

Vanadium-based nanomaterials for electrochemical energy storage by: (書目-電子資源)

Materialising the futurea learning path to understand, develop and apply emerging materials and technologies / by: (書目-電子資源)

Carburising and nitriding of iron alloys by: (書目-電子資源)

High-performance metallic composites fabricated by advanced rolling techniques by: (書目-電子資源)

Steel 4.0digitalization in steel industry / by: (書目-電子資源)

Recent advancements in mechanical engineeringselect proceedings of ICRAME 2022 / by: (書目-電子資源)

Joining operations for aerospace materials by: (書目-電子資源)

Applied building physics and materials science of natural fiber reinforced plasticsa guide for study and practice / by: (書目-電子資源)

Proceedings of the 3rd International Conference on Advanced Surface Enhancement (INCASE) 2023Surface engineering for sustainability / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ICRAMERD 2023 / by: (書目-電子資源)

Mistakes before, during and after heat treatment of steel by: (書目-電子資源)

Ultraviolet light curable piezoelectric multi-phase composites by: (書目-電子資源)

Wood & fire safety 2024proceedings of the 10th International Conference on Wood & Fire Safety 2024 / by: (書目-電子資源)

Creation and accumulation of radiation defects in single crystals of magnesium oxideresearch aims and methodology / by: (書目-電子資源)

Novel aspects of diamond IIscience and technology / by: (書目-電子資源)

New achievements in mechanicsa tribute to Klaus Peter Herrmann / by: (書目-電子資源)

Structural composite materialsfabrication, properties, applications and challenges / by: (書目-電子資源)

Rare earth metals and minerals industriesstatus and prospects / by: (書目-電子資源)

Advanced manufacturing processes Vselected papers from the 5th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2023), September 5-8, 2023, Odessa, Ukraine / by: (書目-電子資源)

Laser powder bed fusion of additive manufacturing technology by: (書目-電子資源)

Selected topics in manufacturingemerging trends from the perspective of AITeM's young researchers / by: (書目-電子資源)

Component surfacesmanufacturing-morphology-property relationships / by: (書目-電子資源)

Superplastic forming/diffusion bonding technology of titanium alloystheories and applications / by: (書目-電子資源)

Practical implementations of additive manufacturing technologies by: (書目-電子資源)

Advances in mechanical engineering and material scienceselect proceedings of ICAMEMS 2023 / by: (書目-電子資源)

Advances in engineering materialsselect proceedings of FLAME 2022 / by: (書目-電子資源)

Advances in materials and agile manufacturingselect proceedings of CPIE 2023 / by: (書目-電子資源)

Advances in additive manufacturingmaterials, processes and applications : selected contributions to the 2nd Advances in Additive Manufacturing Conference (AIAM' 2023), May 18-20, 2023, Hammamet, Tunisia / by: (書目-電子資源)

Fundamentals of metallurgical thermodynamics by: (書目-電子資源)

System lightweight design for aviation by: (書目-電子資源)

Advances in applied mechanicsproceedings of the Eleventh International Congress for Applied Mechanics (JET'2022), November 16-18, 2022, Marrakech, Morocco / by: (書目-電子資源)

Magnetic levitationinnovation of density-based applications / by: (書目-電子資源)

7th International Conference on Structural Adhesive Bonding 2023selected contributions of AB 2023 / by: (書目-電子資源)