國立高雄大學電機工程學系--工業技術整合產業研發碩士專班
Overview
Works: | 1 works in 17 publications in 2 languages |
---|
Titles
2.5D多層覆晶封裝底膠填充材料之研究 = Study of Under-Filled Materials for 2.5DIC Flip Chip
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 翁肇鴻
(Language materials, printed)
探討螺絲表面之複合鋅鍍層對其抗腐蝕性能及硬度之影響研究 = Effect of composite plating on properties of corrosion and hardness for screw surface
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 葉志文
(Language materials, printed)
利用微乳化法製備磷酸鋰鐵/碳複合材料並探討溫度對其性能的影響研究 = Effect of Synthesis Temperature on the Properties of LiFePO4/C Composites Prepared by the Microemulsion Method
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 鐘亞晴
(Language materials, printed)
整合均勻設計與克利金插值法於壓粉體燒結放電加工對表面鍍層參數最佳化設計 = Optimal Parameter for Surface Modification by W-Powder Sinter Electrical Discharge Machining with Application of Uniform Design and Kriging Interpolation Methods
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 朱瓊芳
(Language materials, printed)
IC導線架剪切製程之沖頭壽命研究 = Study on Punch Life of IC Lead Frame Stamping Process
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 曾耀進
(Language materials, printed)
利用傅氏光學於金屬扣件之外觀形貌辨識及檢測技術研究 = Appearance Identification of Fasteners by Using Fourier Optics and Analysis
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 黃瓊萱
(Language materials, printed)
微鑽針鑽削 Inconel 718振動與磨耗特性之研究 = Study on Vibration and Wear Characteristics for Micro Drilling Inconel 718 Material
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 蔡志忠
(Language materials, printed)
品質機能展開之顧客需求分析與產品設計應用—以扣件製造商S公司為例 = Customer Demand Analysis and Product Design Application of Quality Function Deployment—The case of S company
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 鐘云偵
(Language materials, printed)
壓粉體燒結放電加工對表面鍍層參數最佳化設計 = Study on Optimal Parameter for Surface Modification by W-Powder Sinter Electrical Discharge Machining
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 戴義家
(Language materials, printed)
鋰錳及鎳氫蓄電池性能測試與分析 = Performance Test and Analysis of NiMH and Li-MnO2 Batteries
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 許志宏
(Language materials, printed)
冷凍空調系統之規劃設計與應用.pdf = Refrigerated Air Conditioning SystemsDesign and Application
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 葉志凌
(Language materials, printed)
利用麥克森干涉光學原理於DRAM薄型封裝後平面度之量測 = The surface profile measurement of DRAM thin packaged Devices by using Michelson Interference method
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 胡鈞元
(Language materials, printed)
運用迴歸分析於基板電路佈局之最佳化設計 = Optimal Design on Substrate Circuit Layout by Using Regression Analysis
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 王冠傑
(Language materials, printed)
利用Indium-Tin-Oxide sol-gel薄膜材料於MIS結構之製作與特性量測研究 = The Study of the MIS Device with Indium-Tin-Oxide sol-gel Thin Film and Its Characterizations
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 邱國恩
(Language materials, printed)
利用電紡絲合成磷酸鋰鐵/碳複合材料 = Synthesis LiFePO4/C Composited through the Electrospinning Method
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 葉順茂
(Language materials, printed)
光纖耦合效率參數最佳化設計 = End Face Design Optimization for Improving Optical Fiber Coupling Efficiency
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 謝佳宏
(Language materials, printed)
應用DANP建立集體決策的標準作業程序:以某半導體封裝測試廠產能擴充為例 = Creating an SOP incorporating the DANP methodology into group decision making: The case of capacity expansion in a semiconductor OSAT firm
by:
國立高雄大學電機工程學系--工業技術整合產業研發碩士專班; 項泰瑞
(Language materials, printed)
Show more
Fewer
Subjects
Michelson interference optical measurements
品質機能展開
IC導線架
放電加工
Coupling efficiency
single crystal
cooling water pump
真圓度
鋰離子電池
溶膠-凝膠法
光纖耦合
低溫螺旋式滷水主機,冰水泵,冷卻水泵,水槽
microSD薄型封裝記憶卡
EDM
Quality Function Deployment
傅氏光學
Hole Enlargement
NiMH battery
Lithium-ion batteries
低碳鋼螺絲
Sinter
Standard Operational Procedure (SOP)
IC lead frame
Low carbon steel screws
單晶奈米
標準作業程序
基板電路佈局
Sol-Gel
Fourier Optics
鋰錳蓄電池
2.5DIC