國立高雄大學圖資館 |

登入

回首頁

Maskless, resistless ion beam lithography processes.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Maskless, resistless ion beam lithography processes.
作者:	Ji, Qing.
面頁冊數:	114 p.
附註:	Chair: Tsu-Jae King.
附註:	Source: Dissertation Abstracts International, Volume: 64-09, Section: B, page: 4524.
Contained By:	Dissertation Abstracts International64-09B.
標題:	Engineering, Electronics and Electrical.
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3105254
ISBN:	0496528211

Maskless, resistless ion beam lithography processes.
Ji, Qing.

Maskless, resistless ion beam lithography processes. [electronic resource] - 114 p.

Chair: Tsu-Jae King.

Thesis (Ph.D.)--University of California, Berkeley, 2003.

An array of microcolumns can be built by stacking multi-aperture electrode and insulator layers. Because the multicusp plasma source can achieve uniform ion density over a large area, it can be used in conjunction with the array of microcolumns, for massively parallel FIB processing to achieve reasonable exposure throughput.

ISBN: 0496528211Subjects--Topical Terms:

226981
Engineering, Electronics and Electrical.

Maskless, resistless ion beam lithography processes.
LDR:03711nmm _2200301 _450 001 162200
005 20051017073421.5
008 230606s2003 eng d
020 $a 0496528211
035 $a 00148701
035 $a 162200
040 $a UnM $c UnM
100 0 $a Ji, Qing. $3 227320
245 1 0 $a Maskless, resistless ion beam lithography processes. $h [electronic resource]
300 $a 114 p.
500 $a Chair: Tsu-Jae King.
500 $a Source: Dissertation Abstracts International, Volume: 64-09, Section: B, page: 4524.
502 $a Thesis (Ph.D.)--University of California, Berkeley, 2003.
520 # $a An array of microcolumns can be built by stacking multi-aperture electrode and insulator layers. Because the multicusp plasma source can achieve uniform ion density over a large area, it can be used in conjunction with the array of microcolumns, for massively parallel FIB processing to achieve reasonable exposure throughput.
520 # $a As the dimensions of semiconductor devices are scaled down, in order to achieve higher levels of integration, optical lithography will no longer be sufficient for the needs of the semiconductor industry. Alternative next-generation lithography (NGL) approaches, such as extreme ultra-violet (EUV), X-ray, electron-beam, and ion projection lithography face some challenging issues with complicated mask technology and low throughput. Among the four major alternative NGL approaches, ion beam lithography is the only one that can provide both maskless and resistless patterning. As such, it can potentially make nano-fabrication much simpler. This thesis investigates a focused ion beam system for maskless, resistless patterning that can be made practical for high-volume production.
520 # $a Direct patterning of Si thin film using a focused O2 + ion beam has been investigated. A thin surface oxide film can be selectively formed using 3 keV O2+ ions with the dose of 1015 cm-2. The oxide can then serve as a hard mask for patterning of the Si film. The process flow and the experimental results for directly patterned poly-Si features are presented. The formation of shallow pn-junctions in bulk silicon wafers by scanning focused P+ beam implantation at 5 keV is also presented. With implantation dose of around 1016 cm-2, the electron concentration is about 2.5 x 1018 cm -3 and electron mobility is around 200 cm2/V·s. To demonstrate the suitability of scanning FIB lithography for the manufacture of integrated circuit devices, SOI MOSFET fabrication using the maskless, resistless ion beam lithography is demonstrated.
520 # $a In order to achieve maskless, resistless patterning, the ion source must be able to produce a variety of ion species. The compact FIB system being developed uses a multicusp plasma ion source, which can generate ion beams of various elements, such as O2+, BF2 +, P+ etc., for surface modification and doping applications. With optimized source condition, around 85% of BF2+, over 90% of O2+ and P+ have been achieved.
520 # $a The brightness of the multicusp-plasma ion source is a key issue for its application to maskless ion beam lithography. It can be substantially improved by optimizing the source configuration and extractor geometry. Measured brightness of 2 keV He+ beam is as high as 440 A/cm 2·Sr, which represents a 30x improvement over prior work.
590 $a School code: 0028.
650 # 0 $a Engineering, Electronics and Electrical. $3 226981
710 0 # $a University of California, Berkeley. $3 212474
773 0 # $g 64-09B. $t Dissertation Abstracts International
790 $a 0028
790 1 0 $a King, Tsu-Jae, $e advisor
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://libsw.nuk.edu.tw/login?url=http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3105254 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3105254