國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Tantalum oxide thin films for high-k...

Min, Kyunghoon.

Tantalum oxide thin films for high-k dielectric applications: Crystallization, anisotropy and three dimensional imaging.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Tantalum oxide thin films for high-k dielectric applications: Crystallization, anisotropy and three dimensional imaging.
作者:	Min, Kyunghoon.
面頁冊數:	120 p.
附註:	Adviser: Robert Sinclair.
附註:	Source: Dissertation Abstracts International, Volume: 65-09, Section: B, page: 4777.
Contained By:	Dissertation Abstracts International65-09B.
標題:	Engineering, Materials Science.
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3145623
ISBN:	049604592X

Tantalum oxide thin films for high-k dielectric applications: Crystallization, anisotropy and three dimensional imaging.
Min, Kyunghoon.

Tantalum oxide thin films for high-k dielectric applications: Crystallization, anisotropy and three dimensional imaging. - 120 p.

Adviser: Robert Sinclair.

Thesis (Ph.D.)--Stanford University, 2004.

A further application of FIB combined with TEM allows novel specimen preparation for electron tomography. Accordingly, we can address the three dimensional imaging of Ta2O5 thin films deposited on hemi-spherical grain silicon (HSG) structures. The post-shaped sample preparation method using a FIB and the full rotation holder were designed to achieve complete dataset acquisition. The results show that the reconstructed image from a complete dataset eliminates the artifacts caused by missing data wedges, demonstrating the successful application of electron tomography to the imaging of Ta 2O5 thin films on HSG.

ISBN: 049604592XSubjects--Topical Terms:

226940
Engineering, Materials Science.

Tantalum oxide thin films for high-k dielectric applications: Crystallization, anisotropy and three dimensional imaging.
LDR:03376nmm _2200289 _450 001 162905
005 20051017073535.5
008 090528s2004 eng d
020 $a 049604592X
035 $a 00149406
040 $a UnM $c UnM
100 0 $a Min, Kyunghoon. $3 228051
245 1 0 $a Tantalum oxide thin films for high-k dielectric applications: Crystallization, anisotropy and three dimensional imaging.
300 $a 120 p.
500 $a Adviser: Robert Sinclair.
500 $a Source: Dissertation Abstracts International, Volume: 65-09, Section: B, page: 4777.
502 $a Thesis (Ph.D.)--Stanford University, 2004.
520 # $a A further application of FIB combined with TEM allows novel specimen preparation for electron tomography. Accordingly, we can address the three dimensional imaging of Ta2O5 thin films deposited on hemi-spherical grain silicon (HSG) structures. The post-shaped sample preparation method using a FIB and the full rotation holder were designed to achieve complete dataset acquisition. The results show that the reconstructed image from a complete dataset eliminates the artifacts caused by missing data wedges, demonstrating the successful application of electron tomography to the imaging of Ta 2O5 thin films on HSG.
520 # $a High dielectric constant (high-k) materials have been drawing much attention for applications such as gate oxides for transistors and dynamic random access memory (DRAM) capacitors. Tantalum pentoxide (Ta2O5) is a possible replacement because of its relatively high dielectric constant and process compatibility.
520 # $a The microstructure of Ta2O5 thin films, deposited on Si substrates by atomic layer deposition, was investigated primarily using transmission electron microscopy (TEM). The kinetics of the crystallization and evolution of a complicated subgrain structure were studied by in-situ TEM heating experiments carried out at nominal temperatures of 790°C, 820°C and 850°C. It was found that the crystallization behavior could be modeled by a standard kinetic approach, using the Avrami equation, and differences from conventional bulk behavior are discussed. The growth and overall crystallization activation energies extracted from the in-situ TEM results were 4.2 eV and 6.3 eV, respectively.
520 # $a The tantalum oxide films used in this study were found to have two predominant crystallographic orientations. In order to evaluate the possible anisotropic properties of the two types of grains, micro-capacitors were fabricated on each type using a combination of a focused ion beam machine (FIB) and the TEM. Plan-view TEM samples were prepared to identify and locate grain orientations followed by electron beam assisted chemical vapor deposition of a Pt top electrode using the local deposition capability of the FIB. Electrical measurement of the micro-capacitors was carried out using a micromanipulator inside the FIB. The dielectric properties of the two types of grains were directly compared from the measurements.
590 $a School code: 0212.
650 # 0 $a Engineering, Materials Science. $3 226940
690 $a 0794
710 0 # $a Stanford University. $3 212607
773 0 # $g 65-09B. $t Dissertation Abstracts International
790 $a 0212
790 1 0 $a Sinclair, Robert, $e advisor
791 $a Ph.D.
792 $a 2004
856 4 0 $u http://libsw.nuk.edu.tw:81/login?url=http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3145623 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3145623