國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Synthesis and characterization of zi...

Sirota, Ben.

Synthesis and characterization of zinc oxide and bismuth oxide nanowires grown by magnetron sputtering.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Synthesis and characterization of zinc oxide and bismuth oxide nanowires grown by magnetron sputtering.
作者:	Sirota, Ben.
面頁冊數:	65 p.
附註:	Source: Masters Abstracts International, Volume: 50-04, page: 2470.
附註:	Adviser: Samir Aouadi.
Contained By:	Masters Abstracts International50-04.
標題:	Physics, Condensed Matter.
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1506851
ISBN:	9781267203106

Synthesis and characterization of zinc oxide and bismuth oxide nanowires grown by magnetron sputtering.
Sirota, Ben.

Synthesis and characterization of zinc oxide and bismuth oxide nanowires grown by magnetron sputtering. - 65 p.

Source: Masters Abstracts International, Volume: 50-04, page: 2470.

Thesis (M.S.)--Southern Illinois University at Carbondale, 2011.

Nanowires of Zinc oxide and bismuth oxide were grown on silicon substrates using vapor-liquid-solid (VLS) and unbalanced magnetron sputtering. Characterization using x-ray diffraction (XRD) and scanning electron microscopy (SEM) was conducted to investigate how growth conditions influence the structural and morphological properties of the materials. Optical properties were investigated using photoluminescence (PL), direct absorption spectra and cyclic voltammetry. The physical properties of sputtered ZnO were found to be dependent on oxygen flow rate, temperature, and the initial foreign metal catalysis seed layer. Nanowires were grown using a two-step process whereby an initial Au layer was deposited followed by Zn with oxygen. Doped ZnO-TiO2 nanostructures were created by sputtering Ti and Zn simultaneously. Homo- and hetero-structured ZnO-ZnO and ZnO-TiO 2 were created using additional sputtering cycles. A systematic approach was taken to produce nanoarrays of Bi2O3 by adjusting initial seed layer thickness and oxygen flow rates. A two step process involving variable oxygen flow rates was found to create the highest density of Bi 2O3 nanowires in the array. Top-view and cross-sectional SEM micrographs suggested that the resulting Bi2O3 nanowires were approximately 300 nm in length with diameters of 100 nm at the base and 30 nm at the top. Investigation into the growth method suggests a self-catalytic VLS-like process. Degradation tests using rhodamine 6G dye were compared to SEM images. Samples of ZnO and Bi2O3 displayed a direct correlation between nanowire density and photocatalytic efficiency.

ISBN: 9781267203106Subjects--Topical Terms:

226939
Physics, Condensed Matter.

Synthesis and characterization of zinc oxide and bismuth oxide nanowires grown by magnetron sputtering.
LDR:02634nmm 2200301 4500 001 380719
005 20130530092746.5
008 130708s2011 ||||||||||||||||| ||eng d
020 $a 9781267203106
035 $a (UMI)AAI1506851
035 $a AAI1506851
040 $a UMI $c UMI
100 1 $a Sirota, Ben. $3 603357
245 1 0 $a Synthesis and characterization of zinc oxide and bismuth oxide nanowires grown by magnetron sputtering.
300 $a 65 p.
500 $a Source: Masters Abstracts International, Volume: 50-04, page: 2470.
500 $a Adviser: Samir Aouadi.
502 $a Thesis (M.S.)--Southern Illinois University at Carbondale, 2011.
520 $a Nanowires of Zinc oxide and bismuth oxide were grown on silicon substrates using vapor-liquid-solid (VLS) and unbalanced magnetron sputtering. Characterization using x-ray diffraction (XRD) and scanning electron microscopy (SEM) was conducted to investigate how growth conditions influence the structural and morphological properties of the materials. Optical properties were investigated using photoluminescence (PL), direct absorption spectra and cyclic voltammetry. The physical properties of sputtered ZnO were found to be dependent on oxygen flow rate, temperature, and the initial foreign metal catalysis seed layer. Nanowires were grown using a two-step process whereby an initial Au layer was deposited followed by Zn with oxygen. Doped ZnO-TiO2 nanostructures were created by sputtering Ti and Zn simultaneously. Homo- and hetero-structured ZnO-ZnO and ZnO-TiO 2 were created using additional sputtering cycles. A systematic approach was taken to produce nanoarrays of Bi2O3 by adjusting initial seed layer thickness and oxygen flow rates. A two step process involving variable oxygen flow rates was found to create the highest density of Bi 2O3 nanowires in the array. Top-view and cross-sectional SEM micrographs suggested that the resulting Bi2O3 nanowires were approximately 300 nm in length with diameters of 100 nm at the base and 30 nm at the top. Investigation into the growth method suggests a self-catalytic VLS-like process. Degradation tests using rhodamine 6G dye were compared to SEM images. Samples of ZnO and Bi2O3 displayed a direct correlation between nanowire density and photocatalytic efficiency.
590 $a School code: 0209.
650 4 $a Physics, Condensed Matter. $3 226939
650 4 $a Nanotechnology. $3 193873
690 $a 0611
690 $a 0652
710 2 $a Southern Illinois University at Carbondale. $b Physics. $3 603171
773 0 $t Masters Abstracts International $g 50-04.
790 1 0 $a Aouadi, Samir, $e advisor
790 1 0 $a Kolmakov, Andrei $e committee member
790 1 0 $a Jayaseker, Thushari $e committee member
790 $a 0209
791 $a M.S.
792 $a 2011
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1506851