國立高雄大學圖資館 |

Vibration engineering and technology of machinery.select proceedings of VETOMAC XVI 2021 /Volume II

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Vibration engineering and technology of machinery.edited by Rajiv Tiwari ... [et al.].
其他題名:	select proceedings of VETOMAC XVI 2021 /
其他題名:	VETOMAC 2021
其他作者:	Tivari, Rajiva.
團體作者:
出版者:	Singapore :Springer Nature Singapore :2024.
面頁冊數:	xvi, 581 p. :ill., digital ;24 cm.
Contained By:	Springer Nature eBook
標題:	Vibration
電子資源:	https://doi.org/10.1007/978-981-99-8986-7
ISBN:	9789819989867$q(electronic bk.)

Vibration engineering and technology of machinery.select proceedings of VETOMAC XVI 2021 /Volume II
Vibration engineering and technology of machinery.select proceedings of VETOMAC XVI 2021 /Volume II[electronic resource] :VETOMAC 2021edited by Rajiv Tiwari ... [et al.]. - Singapore :Springer Nature Singapore :2024. - xvi, 581 p. :ill., digital ;24 cm. - Mechanisms and machine science,1532211-0992 ;. - Mechanisms and machine science ;v.2..

Identification in a Magnetically Levitated Rigid Rotor System Integrated with Misaligned Sensors and Active Magnetic Bearings -- Thermo-Elastic Bending and Buckling Behavior of Functionally Graded Shafts with Various Grading Patterns -- Modeling and Analysis of Low-Pressure Steam Turbine Blade -- Enhanced energy harvesting application of Piezoceramics (PZT) in MEMS Devices -- Diesel Locomotive Alternator Bearing Damage Detection by Adopting Comprehensive Condition Monitoring Techniques -- Response Analysis of Inclined Edge Cracked Beam Under Moving Mass -- Non-Stationary Response of a Bridge Due to Moving Vehicle with Random Arrival Rate -- Multiclass Fault Diagnosis and Novelty Detection of Induction Motor Using Deep Learning Algorithm Based on Frequency Domain Signal -- Modelling and Analysis of Active Magnetic Bearing Integrated Reaction Wheels for Satellite Applications -- Single Plane Balancing of Rotor-AMB System using Virtual Trial Unbalances -- Comparison of Linear and Non-Linear Feedforward Algorithms to Control Chaotic and Impulsive Noise -- Effect of Thermo-Mechanical Coupling and Large Deformation on the Response of SMA Structures -- Performance Enhancement of Bistable Energy Harvester with Asymmetric Potential Function using an Elastic Magnifier -- Vibration Reduction in Ambulance using Modified Stretcher with Vibration Absorber -- Simulation Studies of Low Velocity Impact Damage in FRPS -- Experimental Identification of Unbalance and Crack Parameters in an Internally Damped Rotor System Integrated with an Active Magnetic Bearing -- Vibration Response Prediction in Rotor Systems with External Damping by Deep Learning using Geometrical Features -- Effect of Bluff Body on the Performance of Flutter Based Energy Harvester -- A Systematic Review of Rotor Unbalance Diagnosis in Rotating Machinery Based on Machine Learning Algorithms -- Tuning of PID Parameters for Misaligned Rotor Bearing System -- Machine Learning based Fault Prediction of Electromechanical System with Currentand Vibration Signals -- Identifying Condition Indicators for Artificially Intelligent Fault Classification in Rolling Element Bearings -- Influence of Local Surface Cracks on Dynamic Parameters of Multi-Span Beam -- Crack Detection in A Shaft Using Wavelet Packet Transform -- Design and Modeling of Piezoresistive MEMS Accelerometer for Crash Test Application -- Classification of Orbits of Rotor Supported nn Squeeze Film Damper by Supervised Learning Method -- Free Vibration Response of Three Dimensional Braided Reinforced Composite Conoidal Shell Using Third-Order Shear Deformation Theory -- The Behavior of Iron Nanopowder and Micron-Sized Flake-Shaped Carbonyl Iron Magnetic Fluid Under Creep and Recovery, Oscillatory, and Frequency Sweep Modes -- A Dynamic Model for Polymer Draft Gears -- -- Modelling and Dynamic Analysis of Viscoelastic Tapered Laminated Composite Beam -- Analysis of Limiting Load Capacity and Stiffness Coefficients of Porous-Bump-Recess Foil Journal Bearing -- Limiting LoadCapacity and Stiffness Coefficients of Bump Recess Foil Journal Bearing with FGM -- Modal Analysis of Three-Dimensional Braided Composite Reinforced Twisted Spherical Shell Using 3D Finite Element Method -- Dynamic Analysis of Flexible Joint and Single Flexible Link Manipulator by Using Finite Element Analysis -- Prediction of Fatigue Crack Growth Behavior Under Cold-TURBISTAN Spectrum Loads Using Variable Crack Closure Approach in GRM 720 Nickel Base Super Alloy -- Optimization of Active Vibration Absorber by Acceleration Feedback using Fixed Point Theory and Genetic Algorithm -- Study of Time Varying Oil Film Damping and Contact Stiffness of Ball Bearings -- Static and Vibration Response Analysis of PZT-5a/Pt Based Smart Functionally Graded (SFG) Plate Subjected to Electromechanical Loading -- Influence of Squeeze Film Damper on the Rub-Impact Response of a Dual-Rotor Model -- Delamination Damage Detection in a Composite Beam using Discrete Wavelet Transform -- Effect of Input Torque on the Modulation Sidebands of Planetary Gears in a Wind Turbine Gearbox under Gravity Excitations -- Stochastic Identification of Damped Beams using Frequency Response Function Data -- Study of Vibration and Wear Debris Damage Detection Methods for Mild Wear in Spur Gear System -- Transient Rotor Dynamics Behaviour of Shrink Fitted Overhung Rotor -- Fault Diagnosis of Gear with Multiple Defects in Planetary Gearbox -- Vibration Analysis of Turbine Blade using Finite Element Method -- Analytical Prediction of the Jet Force in Pelton Turbine -- Intelligent Fault Detection scheme for Rolling Bearing based on Generative Adversarial Network and Auto-Encoders using Convolutional Neural Network -- Sparse Frequency Representation using Autocorrelation of Variational Mode Functions to Detect Compound Fault in Rotating Machines -- Estimation of Theoretical and Experimental Natural Frequencies of Rotating Shafts -- Steady State Non-Linear Forced Vibrational Response of Laminated Sectorial Plates -- Data Driven Modeling and Control of Delivery Drone -- Fault Diagnosis in a Motor Under Variable Speed Conditions: A Survey -- Stability of Cage in Bearings of Reaction Wheels for Satellite Application: A Critical Review -- Fatigue Life Estimation of Pelton Turbine Using Local Strain Approach -- Rotor Crack Depth Estimation using Recurrence Quantification Analysis -- Identification of Dominant Source of Vibration in Geared Rotors using Full Spectrum Analysis -- Influence of Geometric Parameters on the Dynamic Performance of Spiral Bevel Gear -- Finite Element Modelling and Dynamic Stability Analysis of a Functionally Graded Rotor Shaft-Bearing System -- Moment Independent Sensitivity Analysis of Porous Functionally Graded Plates Subjected to Free Vibrations -- Effect of Misalignment in a Geared Rotor System Integrated with Active Magnetic Bearings -- Coupled Vibration Suppression and Energy Harvesting System from Laminated Composite Structure -- Development of Flexible Rotor Balancing Procedure using Response Matching Technique -- Vibration Control and Energy Harvesting Using Coupled Pendulum Absorbers -- Spindle Bearing Vibration Characteristics of Surface Grinding Machine Tool -- Fault Prediction in Induction Motor using Artificial Neural Network Algorithms -- Novel Method for Selective &Controlled Online Mass Removal using Laser Beam for in-Situ Balancing of Flexible Rotor Bearing System -- Optimum Design of Intershaft Squeeze Film Damper (ISSFD) Ring for Vibration Attenuation -- Friction Analysis of an Unbalanced Disk with Recurrence Plot by Using Simpson -- Integration and Empirical Mode Decomposition -- Improving Wideband Sound Absorption of Single Layer Micro-Perforated Panel -- Absorber: A Finite Element and Experimental Approach -- Influence of Auxetic Structure Parameters on Dynamic Impact Energy Absorption -- Vibration Analysis of Functionally Graded Folded Plate -- Mitigation of Plate Vibrations Using Inerter Based Vibration Absorber -- Updation of Structural Dynamic Response Simulation usingMeasured Data for a Typical Naval Aircraft Arrested Landing -- Damage due to Stress Wave Propagation in Composite Fan Blades of Aircraft Engine Subjected to Bird Strike Loading -- Vibration and Stability Response of Laminated Composite Panels with Elliptical Cutout under Hygrothermal Conditions.

This book presents the proceedings of the XVI International Conference on Vibration Engineering and Technology of Machinery (VETOMAC 2021) It gathers the latest advances, innovations, and applications in the field of vibration and technology of machinery. Topics include concepts and methods in dynamics, dynamics of mechanical and structural systems, dynamics and control, condition monitoring, machinery and structural dynamics, rotor dynamics, experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and MEMS. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations. The book is useful for the researchers, engineers and professionals working in the area of vibration engineering and technology of machinery.

ISBN: 9789819989867$q(electronic bk.)

Standard No.: 10.1007/978-981-99-8986-7doiSubjects--Topical Terms:

253841
Vibration

LC Class. No.: TA355

Dewey Class. No.: 620.3

Vibration engineering and technology of machinery.select proceedings of VETOMAC XVI 2021 /Volume II
LDR:09415nmm a22003495a 4500 001 664974
003 DE-He213
005 20240402095851.0
006 m d
007 cr nn 008maaau
008 241219s2024 si s 0 eng d
020 $a 9789819989867$q(electronic bk.)
020 $a 9789819989850$q(paper)
024 7 $a 10.1007/978-981-99-8986-7 $2 doi
035 $a 978-981-99-8986-7
040 $a GP $c GP
041 0 $a eng
050 4 $a TA355
072 7 $a TGMD4 $2 bicssc
072 7 $a TEC009070 $2 bisacsh
072 7 $a TGMD $2 thema
082 0 4 $a 620.3 $2 23
090 $a TA355 $b .V588 2021
111 2 $n (3rd : $d 1998 : $c Amsterdam, Netherlands) $3 194767
245 1 0 $a Vibration engineering and technology of machinery. $n Volume II $h [electronic resource] : $b select proceedings of VETOMAC XVI 2021 / $c edited by Rajiv Tiwari ... [et al.].
246 3 $a VETOMAC 2021
260 $a Singapore : $b Springer Nature Singapore : $b Imprint: Springer, $c 2024.
300 $a xvi, 581 p. : $b ill., digital ; $c 24 cm.
490 1 $a Mechanisms and machine science, $x 2211-0992 ; $v 153
505 0 $a Identification in a Magnetically Levitated Rigid Rotor System Integrated with Misaligned Sensors and Active Magnetic Bearings -- Thermo-Elastic Bending and Buckling Behavior of Functionally Graded Shafts with Various Grading Patterns -- Modeling and Analysis of Low-Pressure Steam Turbine Blade -- Enhanced energy harvesting application of Piezoceramics (PZT) in MEMS Devices -- Diesel Locomotive Alternator Bearing Damage Detection by Adopting Comprehensive Condition Monitoring Techniques -- Response Analysis of Inclined Edge Cracked Beam Under Moving Mass -- Non-Stationary Response of a Bridge Due to Moving Vehicle with Random Arrival Rate -- Multiclass Fault Diagnosis and Novelty Detection of Induction Motor Using Deep Learning Algorithm Based on Frequency Domain Signal -- Modelling and Analysis of Active Magnetic Bearing Integrated Reaction Wheels for Satellite Applications -- Single Plane Balancing of Rotor-AMB System using Virtual Trial Unbalances -- Comparison of Linear and Non-Linear Feedforward Algorithms to Control Chaotic and Impulsive Noise -- Effect of Thermo-Mechanical Coupling and Large Deformation on the Response of SMA Structures -- Performance Enhancement of Bistable Energy Harvester with Asymmetric Potential Function using an Elastic Magnifier -- Vibration Reduction in Ambulance using Modified Stretcher with Vibration Absorber -- Simulation Studies of Low Velocity Impact Damage in FRPS -- Experimental Identification of Unbalance and Crack Parameters in an Internally Damped Rotor System Integrated with an Active Magnetic Bearing -- Vibration Response Prediction in Rotor Systems with External Damping by Deep Learning using Geometrical Features -- Effect of Bluff Body on the Performance of Flutter Based Energy Harvester -- A Systematic Review of Rotor Unbalance Diagnosis in Rotating Machinery Based on Machine Learning Algorithms -- Tuning of PID Parameters for Misaligned Rotor Bearing System -- Machine Learning based Fault Prediction of Electromechanical System with Currentand Vibration Signals -- Identifying Condition Indicators for Artificially Intelligent Fault Classification in Rolling Element Bearings -- Influence of Local Surface Cracks on Dynamic Parameters of Multi-Span Beam -- Crack Detection in A Shaft Using Wavelet Packet Transform -- Design and Modeling of Piezoresistive MEMS Accelerometer for Crash Test Application -- Classification of Orbits of Rotor Supported nn Squeeze Film Damper by Supervised Learning Method -- Free Vibration Response of Three Dimensional Braided Reinforced Composite Conoidal Shell Using Third-Order Shear Deformation Theory -- The Behavior of Iron Nanopowder and Micron-Sized Flake-Shaped Carbonyl Iron Magnetic Fluid Under Creep and Recovery, Oscillatory, and Frequency Sweep Modes -- A Dynamic Model for Polymer Draft Gears -- -- Modelling and Dynamic Analysis of Viscoelastic Tapered Laminated Composite Beam -- Analysis of Limiting Load Capacity and Stiffness Coefficients of Porous-Bump-Recess Foil Journal Bearing -- Limiting LoadCapacity and Stiffness Coefficients of Bump Recess Foil Journal Bearing with FGM -- Modal Analysis of Three-Dimensional Braided Composite Reinforced Twisted Spherical Shell Using 3D Finite Element Method -- Dynamic Analysis of Flexible Joint and Single Flexible Link Manipulator by Using Finite Element Analysis -- Prediction of Fatigue Crack Growth Behavior Under Cold-TURBISTAN Spectrum Loads Using Variable Crack Closure Approach in GRM 720 Nickel Base Super Alloy -- Optimization of Active Vibration Absorber by Acceleration Feedback using Fixed Point Theory and Genetic Algorithm -- Study of Time Varying Oil Film Damping and Contact Stiffness of Ball Bearings -- Static and Vibration Response Analysis of PZT-5a/Pt Based Smart Functionally Graded (SFG) Plate Subjected to Electromechanical Loading -- Influence of Squeeze Film Damper on the Rub-Impact Response of a Dual-Rotor Model -- Delamination Damage Detection in a Composite Beam using Discrete Wavelet Transform -- Effect of Input Torque on the Modulation Sidebands of Planetary Gears in a Wind Turbine Gearbox under Gravity Excitations -- Stochastic Identification of Damped Beams using Frequency Response Function Data -- Study of Vibration and Wear Debris Damage Detection Methods for Mild Wear in Spur Gear System -- Transient Rotor Dynamics Behaviour of Shrink Fitted Overhung Rotor -- Fault Diagnosis of Gear with Multiple Defects in Planetary Gearbox -- Vibration Analysis of Turbine Blade using Finite Element Method -- Analytical Prediction of the Jet Force in Pelton Turbine -- Intelligent Fault Detection scheme for Rolling Bearing based on Generative Adversarial Network and Auto-Encoders using Convolutional Neural Network -- Sparse Frequency Representation using Autocorrelation of Variational Mode Functions to Detect Compound Fault in Rotating Machines -- Estimation of Theoretical and Experimental Natural Frequencies of Rotating Shafts -- Steady State Non-Linear Forced Vibrational Response of Laminated Sectorial Plates -- Data Driven Modeling and Control of Delivery Drone -- Fault Diagnosis in a Motor Under Variable Speed Conditions: A Survey -- Stability of Cage in Bearings of Reaction Wheels for Satellite Application: A Critical Review -- Fatigue Life Estimation of Pelton Turbine Using Local Strain Approach -- Rotor Crack Depth Estimation using Recurrence Quantification Analysis -- Identification of Dominant Source of Vibration in Geared Rotors using Full Spectrum Analysis -- Influence of Geometric Parameters on the Dynamic Performance of Spiral Bevel Gear -- Finite Element Modelling and Dynamic Stability Analysis of a Functionally Graded Rotor Shaft-Bearing System -- Moment Independent Sensitivity Analysis of Porous Functionally Graded Plates Subjected to Free Vibrations -- Effect of Misalignment in a Geared Rotor System Integrated with Active Magnetic Bearings -- Coupled Vibration Suppression and Energy Harvesting System from Laminated Composite Structure -- Development of Flexible Rotor Balancing Procedure using Response Matching Technique -- Vibration Control and Energy Harvesting Using Coupled Pendulum Absorbers -- Spindle Bearing Vibration Characteristics of Surface Grinding Machine Tool -- Fault Prediction in Induction Motor using Artificial Neural Network Algorithms -- Novel Method for Selective &Controlled Online Mass Removal using Laser Beam for in-Situ Balancing of Flexible Rotor Bearing System -- Optimum Design of Intershaft Squeeze Film Damper (ISSFD) Ring for Vibration Attenuation -- Friction Analysis of an Unbalanced Disk with Recurrence Plot by Using Simpson -- Integration and Empirical Mode Decomposition -- Improving Wideband Sound Absorption of Single Layer Micro-Perforated Panel -- Absorber: A Finite Element and Experimental Approach -- Influence of Auxetic Structure Parameters on Dynamic Impact Energy Absorption -- Vibration Analysis of Functionally Graded Folded Plate -- Mitigation of Plate Vibrations Using Inerter Based Vibration Absorber -- Updation of Structural Dynamic Response Simulation usingMeasured Data for a Typical Naval Aircraft Arrested Landing -- Damage due to Stress Wave Propagation in Composite Fan Blades of Aircraft Engine Subjected to Bird Strike Loading -- Vibration and Stability Response of Laminated Composite Panels with Elliptical Cutout under Hygrothermal Conditions.
520 $a This book presents the proceedings of the XVI International Conference on Vibration Engineering and Technology of Machinery (VETOMAC 2021) It gathers the latest advances, innovations, and applications in the field of vibration and technology of machinery. Topics include concepts and methods in dynamics, dynamics of mechanical and structural systems, dynamics and control, condition monitoring, machinery and structural dynamics, rotor dynamics, experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and MEMS. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations. The book is useful for the researchers, engineers and professionals working in the area of vibration engineering and technology of machinery.
650 0 $a Vibration $3 253841
650 0 $a Machinery $x Vibration $v Congresses. $3 710517
650 1 4 $a Multibody Systems and Mechanical Vibrations. $3 922041
650 2 4 $a Machinery and Machine Elements. $3 274678
650 2 4 $a Control, Robotics, Automation. $3 914981
700 1 $a Tivari, Rajiva. $3 963771
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer Nature eBook
830 0 $a Mechanisms and machine science ; $v v.2. $3 558595
856 4 0 $u https://doi.org/10.1007/978-981-99-8986-7
950 $a Engineering (SpringerNature-11647)