國立高雄大學圖資館 |

Magnesium :proceeding of the 6th International Conference : magnesium alloys and their applications /

Record Type:	Electronic resources : Monograph/item
Title/Author:	Magnesium :edited by K.U. Kainer.
Reminder of title:	proceeding of the 6th International Conference : magnesium alloys and their applications /
other author:	Kainer, K. U.
Published:	Weinheim :Wiley-VCH,2004.
Description:	xxiv, 1,064 p. :ill. ;cm.
Subject:	Magnesium.
Online resource:	Authentication may be required:
ISBN:	3527309756 (print. ed.)

Magnesium :proceeding of the 6th International Conference : magnesium alloys and their applications /
Magnesium :proceeding of the 6th International Conference : magnesium alloys and their applications /[electronic resource] :edited by K.U. Kainer. - Weinheim :Wiley-VCH,2004. - xxiv, 1,064 p. :ill. ;cm.

Includes bibliographical references and index.

Microstructural design for enhanced elevated temperature properties in sand-castable magnesium alloys -- thermodynamic Database for Mg-alloys : progress and application to Mg-Al-Ca-Si alloy development -- development of the new creep resistant alloy AS31 -- Phase formation, precipitation and strengthening mechanisms in Mg-Zn-Sn alloys -- Die casting for high performance � Focus on alloy development -- New Mg-alloys for the thixomolding process -- Structure and morphology of effective obstacles in high performance Mg � Rare earth base alloys -- Regularities in the phase diagrams and behavior during aging of the ternary Mg-base alloys containing two rare-earth metals of different subgroups -- Development of new magnesium alloys for advanced applications -- Creep resistance and creep kinetics of Mg-alloys -- Creep behaviour of MgZnRE alloys formed by semi-solid-casting -- Creep resistant magnesium alloys for powertrain applications -- Russian ultralight constructional Mg�Li alloys : their structure, properties, manufacturing, applications -- The effect of grain size on the mechanical properties of AM-SC1 -- Thermal properties of Mg-Li and Mg-Li-Al alloys -- Designing for improved creep resistance in the RE � Free magnesium alloys -- Ageing characteristics and creep resistance of Mg-Y-Nd-Sc-Mn alloy -- Deformation behaviour of Mg-Li-Al alloys at room and elevated temperatures -- The effect of grain size on the bolt load retention behaviour of AMC-SC1 -- High temperature behaviour of a new Mg-Ca-Zn alloy -- Investigation of die cast Mg-Al alloys with additions of Sn, Si and Sb -- An electron microscopy investigation on As-cast AZ91D alloy modified with nitrogen -- Recrystallization behaviour of four magnesium alloys -- Dynamic recrystallization of Mg-3Al-1Zn -- Mechanical properties and formability of PM Mg-Al based alloys -- Corrosion properties of conversion plasma coated magnesium alloys -- The effect of variations in melt temperature on the grain structures in an AM60 die casting -- Microstructural characterisation of AZ91 magnesium alloy -- Microstructural changes of AZ91 magnesium alloy after heat treatment -- Microstructure of ultra fine grained Mg and Mg-10 wt.% Gd prepared by high- pressure torsion -- Development of new grain structure and tensile properties improving in a hot pressed and ECAP processed ZK60 magnesium alloy -- Texture formation and texture modelling of AZ31 magnesium wrought alloy -- Texture development of AM20 tensile samples under load -- Strengthening phases in extruded quasicrystal containing Mg-Zn-Y alloys -- Grain structure characterization of AM60 die castings by electron backscatter diffraction (EBSD) measurements in SEM -- Possibilities of ECAP of magnesium alloy -- Electron probe micro analysis of sedimented zirconium particles in magnesium -- Superplasticity in hot-rolled magnesium alloy AZ31 sheets -- Extrusion of magnesium profiles and microstructure characterization -- Investigating the plastic deformation behaviour of magnesium alloy AZ31 by plane strain forging of U and H sections -- Application of isothermal rolling for improvement of sheet formability of a magnesium alloy -- Influence of Al content (<3%) on the extrusion limit diagram -- Comparison of microstructure and mechanical properties of indirect and hydrostatic extruded magnesium alloys -- Improvements to the rolling-process in order to increase the formability of magnesium wrought alloys -- The effect of strain-hardening and process parameters on the forgeability of wrought magnesium alloys -- Superplasticity in magnesium alloys processed by different-roll-speeds rolling -- Results of tempered hydroforming of magnesium sheets with hydroforming fluids -- Bending magnesium extrusions -- Drawing of magnesium wires at ambient temperature -- The MAGNEXTRUSCO project : process and alloy development for hydrostatic extrusion of magnesium -- Microstructure and mechanical properties of squeeze cast AM60 Mg composites reinforced with AISI 304 wires -- Thermal strain in Mg composites -- Synthesis of TiC dispersed composite in Mg-alloy matrix -- Influence of fibre preform permeability on infiltration of magnesium-zinc base alloys -- Magnesium integral foams - production and properties -- Creep of reinforced and unreinforced QE22 magnesium alloy -- Thermal exposure behaviour of aluminum borate whisker reinforced magnesium matrix composites -- Creep properties of Mg dispersion-strengthened by graphite -- High strength Si-O-C ceramic foams for the reinforcement of Mg-alloys -- Creep behavior of Mg-alloys AE42 and AZ91 reinforced with carbon short fibers -- High performance magnesium composite alloys with Mg2Si dispersoids via solid-state synthesis process -- Fracture toughness behaviour of as-cast and long-term annealed pressure die cast magnesium alloys -- Influence of strain rate and temperature on deformation and fracture behaviour of magnesium alloy MgAl8Zn : tests and numerical simulations -- Low-temperature superplasticity in microcrystalline ZK60 and AZ91 magnesium alloys processed by ECAP -- Structural durability and fatigue life assessment for magnesium diecast specimen -- Microstructure/property relationships of three Mg-RE-Zn-Zr alloys -- Influence of extrusion methods on microstructure and mechanical properties of AZ31 magnesium alloy -- Anisotropic mechanical properties of extruded magnesium alloy AZ31 -- Mechanical properties of hot-rolled magnesium AZ31 sheets -- High cycle fatigue of magnesium alloys -- Fatigue life prediction of magnesium alloys for structural applications -- Correlation of microstructure and mechanical properties of rolled magnesium sheet AZ31 -- Effect of warm forming on mechanical properties of an AZ31 magnesium alloy -- Stress state dependent deformability of polycrystalline magnesium -- A method to determine the damping behaviour of coatings on cast magnesium alloy AZ91 -- Microstructure and mechanical properties of heat treated Mg-Zn-Al based alloys -- Analysis of deformation and fracture mechanisms in Mg-AZ31 sheet material -- Unstable plastic deformation in Mg alloys-post relaxation effect -- On the reliability of yield strength data evaluated from as-cast tensile test bars of Mg-alloys -- Understanding the corrosion mechanism : a framework for improving the performance of magnesium alloys -- Potentiodynamic studies of some AZ and ZA magnesium alloys in different corrosive media -- Plating of magnesium - New developments -- Surface treatment of magnesium substrates -- Approach to control the corrosion of magnesium by alloying -- Magnesium alloys protection by microplasmic processing -- Class A surface quality for magnesium diecastings using ceramic precursor-based coatings -- Wear and corrosion resistant ceramic-based multilayer coatings with dry lubrication ability -- New generation of keronite process for corrosion protection of magnesium -- Corrosion properties of PVD-coated magnesium die cast alloy AZ91D investigation of the corrosion properties and the corrosion mechanisms of PVD coated magnesium die cast alloy AZ91 for tribological applications -- Application of magnesium alloys coated with high purity Mg for engineering usage -- Corrosion and fatigue behaviour of the magnesium die-cast alloy AZ91 hp after surface treatment -- Corrosion behaviour in artificially corrosion-oxidation treated Mg alloys -- Corrosion and oxidation of thixomolded magnesium alloys -- Plasma electrochemical synthesis of protective coatings on WE54 magnesium alloy -- Galvanic corrosion of magnesium alloy AZ91 with coated elements -- Corrosion protection by conductive polymers for magnesium alloys -- Plasma hydrogenation of Mg-based alloy films under high-flux, low energy ion irradiation at elevated temperatures -- The corrosion performance of sealed KERONITE coatings on AZ91D magnesium alloy -- Corrosion properties of PVD-coated magnesium die cast alloy AZ91D Contact corrosion properties of differently PVD treated magnesium die cast alloy AZ.

Electronic reproduction.
Somerset, New Jersey :
Wiley InterScience.

Available via World Wide Web.

ISBN: 3527309756 (print. ed.)Subjects--Topical Terms:

225498
Magnesium.
Subjects--Index Terms:

Structural Materials.

LC Class. No.: TA480.M3 / M34 2004

Magnesium :proceeding of the 6th International Conference : magnesium alloys and their applications /
LDR:14166nmm 2200265 a 450 001 161048
003 JWS
005 20050815144320.0
006 m d
007 cr
008 090528s2004 gw sb 001 0 eng d
020 $a 3527309756 (print. ed.)
020 $a 3527603565 (electronic bk.)
035 $a 00146920
040 $a JWS $d UtOrBLW
050 # 4 $a TA480.M3 $b M34 2004
245 0 0 $a Magnesium : $b proceeding of the 6th International Conference : magnesium alloys and their applications / $c edited by K.U. Kainer. $h [electronic resource] :
260 # $a Weinheim : $c 2004. $b Wiley-VCH,
300 $a xxiv, 1,064 p. : $b ill. ; $c cm.
504 $a Includes bibliographical references and index.
505 0 # $a Microstructural design for enhanced elevated temperature properties in sand-castable magnesium alloys -- thermodynamic Database for Mg-alloys : progress and application to Mg-Al-Ca-Si alloy development -- development of the new creep resistant alloy AS31 -- Phase formation, precipitation and strengthening mechanisms in Mg-Zn-Sn alloys -- Die casting for high performance � Focus on alloy development -- New Mg-alloys for the thixomolding process -- Structure and morphology of effective obstacles in high performance Mg � Rare earth base alloys -- Regularities in the phase diagrams and behavior during aging of the ternary Mg-base alloys containing two rare-earth metals of different subgroups -- Development of new magnesium alloys for advanced applications -- Creep resistance and creep kinetics of Mg-alloys -- Creep behaviour of MgZnRE alloys formed by semi-solid-casting -- Creep resistant magnesium alloys for powertrain applications -- Russian ultralight constructional Mg�Li alloys : their structure, properties, manufacturing, applications -- The effect of grain size on the mechanical properties of AM-SC1 -- Thermal properties of Mg-Li and Mg-Li-Al alloys -- Designing for improved creep resistance in the RE � Free magnesium alloys -- Ageing characteristics and creep resistance of Mg-Y-Nd-Sc-Mn alloy -- Deformation behaviour of Mg-Li-Al alloys at room and elevated temperatures -- The effect of grain size on the bolt load retention behaviour of AMC-SC1 -- High temperature behaviour of a new Mg-Ca-Zn alloy -- Investigation of die cast Mg-Al alloys with additions of Sn, Si and Sb -- An electron microscopy investigation on As-cast AZ91D alloy modified with nitrogen -- Recrystallization behaviour of four magnesium alloys -- Dynamic recrystallization of Mg-3Al-1Zn -- Mechanical properties and formability of PM Mg-Al based alloys -- Corrosion properties of conversion plasma coated magnesium alloys -- The effect of variations in melt temperature on the grain structures in an AM60 die casting -- Microstructural characterisation of AZ91 magnesium alloy -- Microstructural changes of AZ91 magnesium alloy after heat treatment -- Microstructure of ultra fine grained Mg and Mg-10 wt.% Gd prepared by high- pressure torsion -- Development of new grain structure and tensile properties improving in a hot pressed and ECAP processed ZK60 magnesium alloy -- Texture formation and texture modelling of AZ31 magnesium wrought alloy -- Texture development of AM20 tensile samples under load -- Strengthening phases in extruded quasicrystal containing Mg-Zn-Y alloys -- Grain structure characterization of AM60 die castings by electron backscatter diffraction (EBSD) measurements in SEM -- Possibilities of ECAP of magnesium alloy -- Electron probe micro analysis of sedimented zirconium particles in magnesium -- Superplasticity in hot-rolled magnesium alloy AZ31 sheets -- Extrusion of magnesium profiles and microstructure characterization -- Investigating the plastic deformation behaviour of magnesium alloy AZ31 by plane strain forging of U and H sections -- Application of isothermal rolling for improvement of sheet formability of a magnesium alloy -- Influence of Al content (<3%) on the extrusion limit diagram -- Comparison of microstructure and mechanical properties of indirect and hydrostatic extruded magnesium alloys -- Improvements to the rolling-process in order to increase the formability of magnesium wrought alloys -- The effect of strain-hardening and process parameters on the forgeability of wrought magnesium alloys -- Superplasticity in magnesium alloys processed by different-roll-speeds rolling -- Results of tempered hydroforming of magnesium sheets with hydroforming fluids -- Bending magnesium extrusions -- Drawing of magnesium wires at ambient temperature -- The MAGNEXTRUSCO project : process and alloy development for hydrostatic extrusion of magnesium -- Microstructure and mechanical properties of squeeze cast AM60 Mg composites reinforced with AISI 304 wires -- Thermal strain in Mg composites -- Synthesis of TiC dispersed composite in Mg-alloy matrix -- Influence of fibre preform permeability on infiltration of magnesium-zinc base alloys -- Magnesium integral foams - production and properties -- Creep of reinforced and unreinforced QE22 magnesium alloy -- Thermal exposure behaviour of aluminum borate whisker reinforced magnesium matrix composites -- Creep properties of Mg dispersion-strengthened by graphite -- High strength Si-O-C ceramic foams for the reinforcement of Mg-alloys -- Creep behavior of Mg-alloys AE42 and AZ91 reinforced with carbon short fibers -- High performance magnesium composite alloys with Mg2Si dispersoids via solid-state synthesis process -- Fracture toughness behaviour of as-cast and long-term annealed pressure die cast magnesium alloys -- Influence of strain rate and temperature on deformation and fracture behaviour of magnesium alloy MgAl8Zn : tests and numerical simulations -- Low-temperature superplasticity in microcrystalline ZK60 and AZ91 magnesium alloys processed by ECAP -- Structural durability and fatigue life assessment for magnesium diecast specimen -- Microstructure/property relationships of three Mg-RE-Zn-Zr alloys -- Influence of extrusion methods on microstructure and mechanical properties of AZ31 magnesium alloy -- Anisotropic mechanical properties of extruded magnesium alloy AZ31 -- Mechanical properties of hot-rolled magnesium AZ31 sheets -- High cycle fatigue of magnesium alloys -- Fatigue life prediction of magnesium alloys for structural applications -- Correlation of microstructure and mechanical properties of rolled magnesium sheet AZ31 -- Effect of warm forming on mechanical properties of an AZ31 magnesium alloy -- Stress state dependent deformability of polycrystalline magnesium -- A method to determine the damping behaviour of coatings on cast magnesium alloy AZ91 -- Microstructure and mechanical properties of heat treated Mg-Zn-Al based alloys -- Analysis of deformation and fracture mechanisms in Mg-AZ31 sheet material -- Unstable plastic deformation in Mg alloys-post relaxation effect -- On the reliability of yield strength data evaluated from as-cast tensile test bars of Mg-alloys -- Understanding the corrosion mechanism : a framework for improving the performance of magnesium alloys -- Potentiodynamic studies of some AZ and ZA magnesium alloys in different corrosive media -- Plating of magnesium - New developments -- Surface treatment of magnesium substrates -- Approach to control the corrosion of magnesium by alloying -- Magnesium alloys protection by microplasmic processing -- Class A surface quality for magnesium diecastings using ceramic precursor-based coatings -- Wear and corrosion resistant ceramic-based multilayer coatings with dry lubrication ability -- New generation of keronite process for corrosion protection of magnesium -- Corrosion properties of PVD-coated magnesium die cast alloy AZ91D investigation of the corrosion properties and the corrosion mechanisms of PVD coated magnesium die cast alloy AZ91 for tribological applications -- Application of magnesium alloys coated with high purity Mg for engineering usage -- Corrosion and fatigue behaviour of the magnesium die-cast alloy AZ91 hp after surface treatment -- Corrosion behaviour in artificially corrosion-oxidation treated Mg alloys -- Corrosion and oxidation of thixomolded magnesium alloys -- Plasma electrochemical synthesis of protective coatings on WE54 magnesium alloy -- Galvanic corrosion of magnesium alloy AZ91 with coated elements -- Corrosion protection by conductive polymers for magnesium alloys -- Plasma hydrogenation of Mg-based alloy films under high-flux, low energy ion irradiation at elevated temperatures -- The corrosion performance of sealed KERONITE coatings on AZ91D magnesium alloy -- Corrosion properties of PVD-coated magnesium die cast alloy AZ91D Contact corrosion properties of differently PVD treated magnesium die cast alloy AZ.
505 8 # $a Corrosion stress relaxation in magnesium alloys -- Effect of small Ca-additions on the corrosion resistance of AS41-Mg alloy -- Contribution to the study of electrochemical corrosion of alloy AZ91 in selected environment -- Study on effects of RE, Ca addition on stress corrosion cracking behaviour of magnesium alloys -- Comparison of the corrosion behaviour between two magnesium alloys by electrochemical noise and scanning reference electrode technique -- Role of manganese in the soldering reaction in magnesium high pressure die casting -- Extended casting simulation for improved magnesium die casting -- Vertical direct chill (VDC) casting of magnesium - optimized casting parameters and safety issues -- Innovative magnetohydrodynamical effect use in casting magnesium alloys -- Magnesium new rheocasting as an industrial process : an update of recent developments -- Influence of process parameters on the microstructure and mechanical properties of magnesium die castings -- Residual stresses in thin-walled hot chamber die cast AZ91d; an experimental study -- A new zirconium-rich master alloy for the grain refinement of magnesium alloys -- A manufacturing technology of AZ91-alloy slurry for semi solid forming -- Characterization and removal of die lubricant residue on magnesium die castings -- Magnesium die casting for high performance -- Influence of direct chill casting parameters on a magnesium alloy -- Injection molding of magnesium alloys -- Molten metal jets lamination at pouring into casting molds -- Non-destructive testing of cast magnesium alloys by computerized tomography -- Investment casting of magnesium -- Cast magnesium alloys and technological processes for casting production -- Rheo-container-process (RCP) : new semisolid forming method for light metal alloys -- Thin Slab casting as a new possibility for economic magnesium sheet metal production -- Duplex process : Crucible furnace - salt-heated furnace is an effective process of making magnesium alloys -- Development of a PAM-CRASH material model for die casting alloys -- Integrated model for calculating microstructural and forming parameters of magnesium alloy AZ31 during hot rolling -- Advanced die casting simulation for a systematical development of magnesium structural components -- Fatigue simulation of light weight components of magnesium -- Product Development process optimization by linking design, numerical simulation and process development -- Calculation of phase dissolution and homogenisation after non-equilibrium solidification in MgAlZn alloys -- Solidification curves of AZ-magnesium alloys determined by DSC experiments and heat-transfer model (DSC-HTM) -- Numerical simulation of magnesium alloy sheet in thermal deep-drawing process -- Machinability investigations of fibre reinforced magnesium -- Thermal spraying of magnesium alloys for corrosion and wear protection -- Welding of magnesium alloy AZ91C by CO2 laser and by friction stir welding -- Investigations of high-productivity methods for joining magnesium sheet -- High speed minimum quantity lubrication machining of magnesium -- Safe and economically efficient use of coolants in mechanical processing of magnesium alloys -- Safe Machining of magnesium parts by cutting and burnishing operations -- Development of a flux free soldering technology for magnesium alloys -- Fatigue Strengh of welded wrought magnesium alloys -- Friction Welding of magnesium : Microstructural characterization -- Module Design concept for lightweight automotive seats -- Cast Magnesium safety components - Energy absorption capacity -- Application of Mg sheets in car body structures -- Experimental comparison of automotive oil pans : creep resistant magnesium alloy vs. aluminum alloy -- Approaches to use magnesium as structural material in car body -- Magnesium sheets for industrial application -- Magnesium in automotive lightweight design under life cycle aspects -- Drawn magnesium wire for robotic welding and for mechanical applications -- Recycling towards quality excellence : a cost efficient solution -- Application of remelted post consumer scrap for structural magnesium parts -- Techniques for recycling of magnesium scrap -- Industrial application of the AMCover cover gas system for magnesium melt protection -- Environmental friendly protection system for molten magnesium -- New perspectives with magnesium sheet -- Experiment and simulation for optimisation of production and usage qualification of magnesium components � Objectives and results of the fraunhofer alliance magnesium light weight construction -- Solidification morphology and shrinkage behavior of mg-alloys in chill- and sand casting -- InMak - innovative magnesium combined structures for car bodies -- Research activities on magnesium alloys at Seoul National University, Korea -- Mg-chassis - Advanced manufacturing technology for automotive chassis components through extensible and sustainable use of Mg alloys -- The MAGNEXTRUSCO project : European community research on hydrostatic extrusion of magnesium -- Static recrystallisation and textural changes in warm rolled pure magnesium.
533 $a Electronic reproduction. $b Somerset, New Jersey : $c Wiley InterScience. $n Available via World Wide Web.
650 # 0 $a Magnesium. $3 225498
650 # 0 $a Magnesium group. $3 225499
650 # 0 $a Light metals. $3 225500
653 # # $a Structural Materials.
700 0 # $a Kainer, K. U. $3 225317
710 0 # $a John Wiley & Sons. $3 209874
776 1 # $c Original $z 3527309756.
856 4 0 $a E-Books (Wiley) $u http://libsw.nuk.edu.tw/login?url=http://dx.doi.org/10.1002/3527603565 $z Authentication may be required: