國立高雄大學圖資館 |

Language: English

Back

An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water

Record Type:	Electronic resources : Monograph/item
Title/Author:	An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water
Author:	Mintz, Todd Samuel.
Description:	400 p.
Notes:	Chair: Thomas M. Devine.
Notes:	Source: Dissertation Abstracts International, Volume: 65-02, Section: B, page: 0978.
Contained By:	Dissertation Abstracts International65-02B.
Subject:	Engineering, Materials Science.
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3121616
ISBN:	0496689673

An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water
Mintz, Todd Samuel.

An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water [electronic resource] - 400 p.

Chair: Thomas M. Devine.

Thesis (Ph.D.)--University of California, Berkeley, 2003.

An in situ investigation of the films that formed on stainless steel and Inconel 600 at 288°C and 1500psi were performed using Surface Enhanced Raman Spectroscopy (SERS). By examining the changes in the films that formed on these materials, information was obtained about how these films affect the Intergranular Stress Corrosion Cracking (IGSCC) of these two metals. Stainless steel was examined in water with dilute amounts of sulfate added, which is known to enhance IGSCC. It was observed that the addition of sulfates in no way affected the films that formed on the stainless steel. The enhanced susceptibility for IGSCC of stainless steel is due to an increase in the conductivity of the water. The increased conductivity, due to the added sulfate, reduced the potential drop down a crack, so the minimum concentration of oxygen required to cause IGSCC is less than in high purity water. Thus, the sulfate additions led to an enhancement in the IGSCC. Incone1 600 was studied in boron and lithium containing solution at 288°C. The results showed that in the corrosion potential region where IGSCC occurs, an M3O4 oxide enriched in chromium was stable. This suggested that the M3O4 was the deleterious film that enhanced SCC in the Inconel 600. Once the potential was increased above the SCC region, NiO formed, which must counteract the effects of the chromium enriched M3O4. The results from this study suggested that there is a correlation between film formation and SCC susceptibility.

ISBN: 0496689673Subjects--Topical Terms:

226940
Engineering, Materials Science.

An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water
LDR:02598nmm _2200289 _450 001 162427
005 20051017073445.5
008 230606s2003 eng d
020 $a 0496689673
035 $a 00148928
035 $a 162427
040 $a UnM $c UnM
100 0 $a Mintz, Todd Samuel. $3 227563
245 1 3 $a An in-situ investigation of the passive film on stainless steel and Inconel 600 in high temperature, pressurized, impurity containing water $h [electronic resource]
300 $a 400 p.
500 $a Chair: Thomas M. Devine.
500 $a Source: Dissertation Abstracts International, Volume: 65-02, Section: B, page: 0978.
502 $a Thesis (Ph.D.)--University of California, Berkeley, 2003.
520 # $a An in situ investigation of the films that formed on stainless steel and Inconel 600 at 288°C and 1500psi were performed using Surface Enhanced Raman Spectroscopy (SERS). By examining the changes in the films that formed on these materials, information was obtained about how these films affect the Intergranular Stress Corrosion Cracking (IGSCC) of these two metals. Stainless steel was examined in water with dilute amounts of sulfate added, which is known to enhance IGSCC. It was observed that the addition of sulfates in no way affected the films that formed on the stainless steel. The enhanced susceptibility for IGSCC of stainless steel is due to an increase in the conductivity of the water. The increased conductivity, due to the added sulfate, reduced the potential drop down a crack, so the minimum concentration of oxygen required to cause IGSCC is less than in high purity water. Thus, the sulfate additions led to an enhancement in the IGSCC. Incone1 600 was studied in boron and lithium containing solution at 288°C. The results showed that in the corrosion potential region where IGSCC occurs, an M3O4 oxide enriched in chromium was stable. This suggested that the M3O4 was the deleterious film that enhanced SCC in the Inconel 600. Once the potential was increased above the SCC region, NiO formed, which must counteract the effects of the chromium enriched M3O4. The results from this study suggested that there is a correlation between film formation and SCC susceptibility.
590 $a School code: 0028.
650 # 0 $a Engineering, Materials Science. $3 226940
650 # 0 $a Engineering, Nuclear. $3 227564
650 # 0 $a Engineering, Metallurgy. $3 227093
690 $a 0552
690 $a 0743
690 $a 0794
710 0 # $a University of California, Berkeley. $3 212474
773 0 # $g 65-02B. $t Dissertation Abstracts International
790 $a 0028
790 1 0 $a Devine, Thomas M., $e advisor
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://libsw.nuk.edu.tw/login?url=http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3121616 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3121616