國立高雄大學圖資館 |

Language: English

Back

Object oriented development of strength and stiffness degrading models for reinforced concrete structures

Record Type:	Electronic resources : Monograph/item
Title/Author:	Object oriented development of strength and stiffness degrading models for reinforced concrete structures
Author:	Kaul, Rohit.
Description:	321 p.
Notes:	Adviser: Gregory G. Deierlein.
Notes:	Source: Dissertation Abstracts International, Volume: 65-04, Section: B, page: 1993.
Contained By:	Dissertation Abstracts International65-04B.
Subject:	Engineering, Civil.
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3128413
ISBN:	0496756753

Object oriented development of strength and stiffness degrading models for reinforced concrete structures
Kaul, Rohit.

Object oriented development of strength and stiffness degrading models for reinforced concrete structures [electronic resource] - 321 p.

Adviser: Gregory G. Deierlein.

Thesis (Ph.D.)--Stanford University, 2004.

Beam-column models are developed and implemented in an object-oriented analysis framework called OpenSees (Open System for Earthquake Engineering Simulation). The large deformation element formulations employ an updated Lagrangian approach. Inelastic models are based on stress resultant plasticity to simulate inelastic hardening/softening response under combined axial loads and bending. A two surface evolution model is proposed for combined non-uniform expansion/contraction and kinematic motion of the yield surface. The yield surface can be used to simulate inelastic section response at integration points along a beam-column element (distributed plasticity) or inelastic hinging at the ends of a beam-column element (concentrated plasticity). In the concentrated plasticity approach, the element between the hinges is quasi-elastic, in which hysteretic models are developed to model the cyclic degradation. This concentrated plasticity model is extended to simulate shear critical column behavior, including shear strength degradation and failure, axial-shear force interaction, and pinched cyclic response.

ISBN: 0496756753Subjects--Topical Terms:

212394
Engineering, Civil.

Object oriented development of strength and stiffness degrading models for reinforced concrete structures
LDR:03426nmm _2200301 _450 001 162601
005 20051017073503.5
008 230606s2004 eng d
020 $a 0496756753
035 $a 00149102
035 $a 162601
040 $a UnM $c UnM
100 0 $a Kaul, Rohit. $3 227745
245 1 0 $a Object oriented development of strength and stiffness degrading models for reinforced concrete structures $h [electronic resource]
300 $a 321 p.
500 $a Adviser: Gregory G. Deierlein.
500 $a Source: Dissertation Abstracts International, Volume: 65-04, Section: B, page: 1993.
502 $a Thesis (Ph.D.)--Stanford University, 2004.
520 # $a Beam-column models are developed and implemented in an object-oriented analysis framework called OpenSees (Open System for Earthquake Engineering Simulation). The large deformation element formulations employ an updated Lagrangian approach. Inelastic models are based on stress resultant plasticity to simulate inelastic hardening/softening response under combined axial loads and bending. A two surface evolution model is proposed for combined non-uniform expansion/contraction and kinematic motion of the yield surface. The yield surface can be used to simulate inelastic section response at integration points along a beam-column element (distributed plasticity) or inelastic hinging at the ends of a beam-column element (concentrated plasticity). In the concentrated plasticity approach, the element between the hinges is quasi-elastic, in which hysteretic models are developed to model the cyclic degradation. This concentrated plasticity model is extended to simulate shear critical column behavior, including shear strength degradation and failure, axial-shear force interaction, and pinched cyclic response.
520 # $a Implementation of the models in OpenSees is planned and structured using object oriented programming concepts. Individual components of the inelastic modeling problem are identified and the interactions between the governing classes are established. The models are implemented in a hierarchal structure, which provides a modular and extensible software design.
520 # $a The accuracy and the capabilities of the proposed models are verified by comparing the analytical results with the experimental data. The models developed as part of this research provide ideal tools for conducting extensive application studies. An extensible framework is provided to facilitate tool development for nonlinear/inelastic analysis.
520 # $a The aim of this research is to develop structural simulation models that can capture the strength and stiffness degradation of reinforced concrete frames up to collapse under earthquake-induced motions. The key modeling aspects of the element formulations include: (1) rigorous modeling of large deformation response, (2) flexural yielding and inelastic axial force-moment interaction (3) degradation of the element stiffness under cyclic loading and (4) axial force-moment-shear interaction for shear critical reinforced concrete columns.
590 $a School code: 0212.
650 # 0 $a Engineering, Civil. $3 212394
690 $a 0543
710 0 # $a Stanford University. $3 212607
773 0 # $g 65-04B. $t Dissertation Abstracts International
790 $a 0212
790 1 0 $a Deierlein, Gregory G., $e advisor
791 $a Ph.D.
792 $a 2004
856 4 0 $u http://libsw.nuk.edu.tw/login?url=http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3128413 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3128413