國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

A theoretical and experimental inves...

Stanford University.

A theoretical and experimental investigation of light extraction from polymer light-emitting diodes.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	A theoretical and experimental investigation of light extraction from polymer light-emitting diodes.
作者:	Ziebarth, Jonathan M.
面頁冊數:	96 p.
附註:	Adviser: Michael D. McGehee.
附註:	Source: Dissertation Abstracts International, Volume: 65-11, Section: B, page: 5963.
Contained By:	Dissertation Abstracts International65-11B.
標題:	Engineering, Electronics and Electrical.
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3153036
ISBN:	0496134817

A theoretical and experimental investigation of light extraction from polymer light-emitting diodes.
Ziebarth, Jonathan M.

A theoretical and experimental investigation of light extraction from polymer light-emitting diodes. - 96 p.

Adviser: Michael D. McGehee.

Thesis (Ph.D.)--Stanford University, 2005.

Low operating voltages, a wide range of emission wavelengths, and solution processing make polymer light-emitting diodes attractive for high-growth markets including flexible displays, large-area displays, and solid-state lighting. However, the external efficiencies of these devices must be improved in order to compete with existing technologies. Currently, the majority of the light generated inside polymer LEDs remains trapped within the device by total internal reflection. Extracting this trapped light can significantly increase the external efficiency. In this thesis, I use both theoretical tools and experimental results to study light extraction from polymer LEDs. First, I examine the optical properties of the light-emitting polymer. The properties of this layer have important implications for light extraction and need to be measured carefully. I have developed a method to accurately measure the optical properties of a light-emitting polymer by using grating outcoupling. The results show that the polymer layers are anisotropic and dispersive. Using numerical modeling techniques, I predict the emission into air, substrate, polymer/indium tin oxide (ITO) and surface plasmon modes of a polymer light-emitting diode. The results give good insight into the possible efficiency increases that can be expected for various light extraction techniques. In addition, the effects of various optical properties and layer thicknesses on the optical performance of the device are reported. I show how modification of the substrate can be used to focus light into mode types that can be easily extracted. I then report my experimental results for two very different light extraction techniques. First, I demonstrate how Bragg gratings can be used to extract light from waveguide modes in the polymer/indium tin oxide (ITO) layers. With an optimized Bragg grating, I have increased the external power efficiency by 25% at high brightness levels. In addition, I have used substrate-shaping techniques to extract light from waveguide modes in the glass substrate. In this case, I was able to increase the efficiency by over 60%. Finally, I compare my numerical and experimental results to summarize the possible benefits of various light extraction strategies.

ISBN: 0496134817Subjects--Topical Terms:

226981
Engineering, Electronics and Electrical.

A theoretical and experimental investigation of light extraction from polymer light-emitting diodes.
LDR:03268nmm _2200277 _450 001 167278
005 20061005085837.5
008 090528s2005 eng d
020 $a 0496134817
035 $a 00197894
040 $a UnM $c UnM
100 0 $a Ziebarth, Jonathan M. $3 237424
245 1 2 $a A theoretical and experimental investigation of light extraction from polymer light-emitting diodes.
300 $a 96 p.
500 $a Adviser: Michael D. McGehee.
500 $a Source: Dissertation Abstracts International, Volume: 65-11, Section: B, page: 5963.
502 $a Thesis (Ph.D.)--Stanford University, 2005.
520 # $a Low operating voltages, a wide range of emission wavelengths, and solution processing make polymer light-emitting diodes attractive for high-growth markets including flexible displays, large-area displays, and solid-state lighting. However, the external efficiencies of these devices must be improved in order to compete with existing technologies. Currently, the majority of the light generated inside polymer LEDs remains trapped within the device by total internal reflection. Extracting this trapped light can significantly increase the external efficiency. In this thesis, I use both theoretical tools and experimental results to study light extraction from polymer LEDs. First, I examine the optical properties of the light-emitting polymer. The properties of this layer have important implications for light extraction and need to be measured carefully. I have developed a method to accurately measure the optical properties of a light-emitting polymer by using grating outcoupling. The results show that the polymer layers are anisotropic and dispersive. Using numerical modeling techniques, I predict the emission into air, substrate, polymer/indium tin oxide (ITO) and surface plasmon modes of a polymer light-emitting diode. The results give good insight into the possible efficiency increases that can be expected for various light extraction techniques. In addition, the effects of various optical properties and layer thicknesses on the optical performance of the device are reported. I show how modification of the substrate can be used to focus light into mode types that can be easily extracted. I then report my experimental results for two very different light extraction techniques. First, I demonstrate how Bragg gratings can be used to extract light from waveguide modes in the polymer/indium tin oxide (ITO) layers. With an optimized Bragg grating, I have increased the external power efficiency by 25% at high brightness levels. In addition, I have used substrate-shaping techniques to extract light from waveguide modes in the glass substrate. In this case, I was able to increase the efficiency by over 60%. Finally, I compare my numerical and experimental results to summarize the possible benefits of various light extraction strategies.
590 $a School code: 0212.
650 # 0 $a Engineering, Electronics and Electrical. $3 226981
650 # 0 $a Engineering, Materials Science. $3 226940
650 # 0 $a Physics, Optics. $3 226935
690 $a 0544
690 $a 0752
690 $a 0794
710 0 # $a Stanford University. $3 212607
773 0 # $g 65-11B. $t Dissertation Abstracts International
790 $a 0212
790 1 0 $a McGehee, Michael D., $e advisor
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://libsw.nuk.edu.tw:81/login?url=http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3153036 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3153036