國立高雄大學圖資館 |

Language: English

Back

Modeling innovations in EUV and nano...

Deng, Yunfei.

Modeling innovations in EUV and nanoimprint lithography.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Modeling innovations in EUV and nanoimprint lithography.
Author:	Deng, Yunfei.
Description:	150 p.
Notes:	Chair: Andrew R. Neureuther.
Notes:	Source: Dissertation Abstracts International, Volume: 66-08, Section: B, page: 4389.
Contained By:	Dissertation Abstracts International66-08B.
Subject:	Engineering, Electronics and Electrical.
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3187017
ISBN:	9780542293382

Modeling innovations in EUV and nanoimprint lithography.
Deng, Yunfei.

Modeling innovations in EUV and nanoimprint lithography. - 150 p.

Chair: Andrew R. Neureuther.

Thesis (Ph.D.)--University of California, Berkeley, 2005.

A geometry to refractive index converter, SAM2TEM was developed to link TEM-PEST with 3D topography simulation in SAMPLE-3D, and thus extend the capability of electromagnetic simulation to a large range of applications involving modeling topographic changes during process. An average material properties technique was developed to provide subcell resolution description of the geometry. This improved accuracy without memory and runtime penalty enables electromagnetic simulation on large 3D EUV multilayer structures on a network of workstations.

ISBN: 9780542293382Subjects--Topical Terms:

226981
Engineering, Electronics and Electrical.

Modeling innovations in EUV and nanoimprint lithography.
LDR:03509nmm _2200301 _450 001 170805
005 20061228142250.5
008 090528s2005 eng d
020 $a 9780542293382
035 $a 00242835
040 $a UnM $c UnM
100 0 $a Deng, Yunfei. $3 244836
245 1 0 $a Modeling innovations in EUV and nanoimprint lithography.
300 $a 150 p.
500 $a Chair: Andrew R. Neureuther.
500 $a Source: Dissertation Abstracts International, Volume: 66-08, Section: B, page: 4389.
502 $a Thesis (Ph.D.)--University of California, Berkeley, 2005.
520 # $a A geometry to refractive index converter, SAM2TEM was developed to link TEM-PEST with 3D topography simulation in SAMPLE-3D, and thus extend the capability of electromagnetic simulation to a large range of applications involving modeling topographic changes during process. An average material properties technique was developed to provide subcell resolution description of the geometry. This improved accuracy without memory and runtime penalty enables electromagnetic simulation on large 3D EUV multilayer structures on a network of workstations.
520 # $a Electromagnetic simulation was also successfully applied to optoelectronic Bragg mirrors and yielded a design of novel sub-wavelength gratings which has a very broad reflection spectrum and very high reflectivity.
520 # $a Electromagnetic simulation was also used to explore the novel Step and Flash Imprint Lithography process with clear-opaque binary molds. This study assesses the material choices and provides design data for the exposure and differential alignment process, The study of complementary inspection shows a cross polarization of up to 15% of incident UV radiation. It is shown that the inspection signal can be improved with the use of shorter wavelength, higher material contrast and immersion liquid.
520 # $a Simulation of the printability for EUV Gaussian defects shows that analytical models are limited by the coherent illumination assumption when defects are large, while its single surface approximation limits the model's validity for small but relatively high defects. Exploration of using d-spacing modified or patterned multilayer directly as photomask in EUV Lithography shows the feasibility of this approach. Lithography imaging performance studies show that the etched and refilled multilayer masks have better image quality in H-V bias, IPE, smaller CD variations, and larger depth of focus than the EUV multilayer masks with absorber stacks.
520 # $a This thesis investigates the application and use of electromagnetic simulation and modeling to a broad range of emerging lithography techniques. The scope of the work includes the extensions of the Finite-Difference Time-Domain algorithm as well as the creation of auxiliary programs for the construction of the input and application specific analysis of the near field output. The dissertation also gives in-depth characterization studies of applications to defect printability and mask performance in EUV lithography, nanoimprint alignment and inspection, and the design of optoelectronic mirrors.
590 $a School code: 0028.
650 # 0 $a Engineering, Electronics and Electrical. $3 226981
690 $a 0544
710 0 # $a University of California, Berkeley. $3 212474
773 0 # $g 66-08B. $t Dissertation Abstracts International
790 $a 0028
790 1 0 $a Neureuther, Andrew R., $e advisor
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://libsw.nuk.edu.tw:81/login?url=http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3187017 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3187017