國立高雄大學圖資館 |

Language: English

Back

The effects of environment and loadi...

Stanford University.

The effects of environment and loading conditions on the fracture of inorganic/organic thin-film layered structures.

Record Type:	Electronic resources : Monograph/item
Title/Author:	The effects of environment and loading conditions on the fracture of inorganic/organic thin-film layered structures.
Author:	Wang, Louise Yueh-Lu.
Description:	101 p.
Notes:	Adviser: Reinhold H. Dauskardt.
Notes:	Source: Dissertation Abstracts International, Volume: 67-02, Section: B, page: 1100.
Contained By:	Dissertation Abstracts International67-02B.
Subject:	Engineering, Materials Science.
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3209063
ISBN:	9780542571466

The effects of environment and loading conditions on the fracture of inorganic/organic thin-film layered structures.
Wang, Louise Yueh-Lu.

The effects of environment and loading conditions on the fracture of inorganic/organic thin-film layered structures. - 101 p.

Adviser: Reinhold H. Dauskardt.

Thesis (Ph.D.)--Stanford University, 2006.

Inkjet printing technology has been widely utilized for document and photo printing. Additionally, non-graphic-arts uses of inkjet printing are developing as a technique for depositing and patterning functional materials in the liquid phase, such as biomaterials, photo resist, and dielectric materials, to a substrate. Epoxy resins are commonly used adhesives between passivated substrates and polyimide films in an inkjet printing head. Although such adhesive layers have high fracture toughness with fracture energies in excess of 500 J/m2, the silica/adhesive interface and the adhesive itself is susceptible to accelerated debonding in a complex chemical environment at high temperature. Debonding is frequently further accelerated by cyclic loading due to heating and cooling cycles, resulting in serious reliability concerns.

ISBN: 9780542571466Subjects--Topical Terms:

226940
Engineering, Materials Science.

The effects of environment and loading conditions on the fracture of inorganic/organic thin-film layered structures.
LDR:02835nmm _2200265 _450 001 180474
005 20080111103713.5
008 090528s2006 eng d
020 $a 9780542571466
035 $a 00311497
040 $a UMI $c UMI
100 0 $a Wang, Louise Yueh-Lu. $3 264049
245 1 4 $a The effects of environment and loading conditions on the fracture of inorganic/organic thin-film layered structures.
300 $a 101 p.
500 $a Adviser: Reinhold H. Dauskardt.
500 $a Source: Dissertation Abstracts International, Volume: 67-02, Section: B, page: 1100.
502 $a Thesis (Ph.D.)--Stanford University, 2006.
520 # $a Inkjet printing technology has been widely utilized for document and photo printing. Additionally, non-graphic-arts uses of inkjet printing are developing as a technique for depositing and patterning functional materials in the liquid phase, such as biomaterials, photo resist, and dielectric materials, to a substrate. Epoxy resins are commonly used adhesives between passivated substrates and polyimide films in an inkjet printing head. Although such adhesive layers have high fracture toughness with fracture energies in excess of 500 J/m2, the silica/adhesive interface and the adhesive itself is susceptible to accelerated debonding in a complex chemical environment at high temperature. Debonding is frequently further accelerated by cyclic loading due to heating and cooling cycles, resulting in serious reliability concerns.
520 # $a The effects of debond growth rate, solution pH and temperature on the interfacial and cohesive adhesion of silica/adhesive/polyimide thin layered systems are examined under different loading mode mixities typical for a range of inkjet printing heads. The relationship between the debond growth rate (da/dt) and the applied strain energy release rate (G) was evaluated using fracture mechanics techniques. The silica/adhesive interface is found to be susceptible at low da/at (<10-7 m/s) in higher pH environments and higher temperatures. However, if da/dt is higher than 10-7 m/s, the adhesive will experience cohesive failure, and the debonding mechanism is determined by pH value and temperature of the environment. Finally, subcritical crack growth process and debond path selection are described in terms of a competing-reaction mechanism. The ability to predict fracture behavior may be used to establish environmental parameters in order to enhance the reliability of inkjet printing heads.
590 $a School code: 0212.
650 # 0 $a Engineering, Materials Science. $3 226940
690 $a 0794
710 0 # $a Stanford University. $3 212607
773 0 # $g 67-02B. $t Dissertation Abstracts International
790 $a 0212
790 1 0 $a Dauskardt, Reinhold H., $e advisor
791 $a Ph.D.
792 $a 2006
856 4 0 $u http://libsw.nuk.edu.tw:81/login?url=http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3209063 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3209063