國立高雄大學圖資館 |

Language: English

Back

Proton-conducting beta"-alumina via ...

Kirby, Brent William.

Proton-conducting beta"-alumina via microwave-assisted synthesis and mechanism of enhanced corrosion prevention of a zinc rich coating with electronic control.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Proton-conducting beta"-alumina via microwave-assisted synthesis and mechanism of enhanced corrosion prevention of a zinc rich coating with electronic control.
Author:	Kirby, Brent William.
Description:	166 p.
Notes:	Adviser: Andrew Bocarsly.
Notes:	Source: Dissertation Abstracts International, Volume: 69-04, Section: B, page: 2566.
Contained By:	Dissertation Abstracts International69-04B.
Subject:	Chemistry, Inorganic.
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3308035
ISBN:	9780549556336

Proton-conducting beta"-alumina via microwave-assisted synthesis and mechanism of enhanced corrosion prevention of a zinc rich coating with electronic control.
Kirby, Brent William.

Proton-conducting beta"-alumina via microwave-assisted synthesis and mechanism of enhanced corrosion prevention of a zinc rich coating with electronic control. - 166 p.

Adviser: Andrew Bocarsly.

Thesis (Ph.D.)--Princeton University, 2008.

Average grain conductivity for Li-stabilized material at 150°C is 6.6x10-3 +/- 1.6x10-3 S/cm with 0.29 +/- 0.05 eV activation energy, in agreement with single crystal studies in the literature. Grain boundary conductivity is found to be higher in the Li-stabilized material. A hydrogen bond energy hypothesis is presented to explain these differences. Li-stabilized NH4+/H3O + beta-alumina is demonstrated as a fuel cell electrolyte, producing 28 muA/cm2 of electrical current at 0.5 V.

ISBN: 9780549556336Subjects--Topical Terms:

197298
Chemistry, Inorganic.

Proton-conducting beta"-alumina via microwave-assisted synthesis and mechanism of enhanced corrosion prevention of a zinc rich coating with electronic control.
LDR:03398nmm _2200301 _450 001 206856
005 20090413125828.5
008 090730s2008 ||||||||||||||||| ||eng d
020 $a 9780549556336
035 $a 00372068
040 $a UMI $c UMI
100 $a Kirby, Brent William. $3 321791
245 1 0 $a Proton-conducting beta"-alumina via microwave-assisted synthesis and mechanism of enhanced corrosion prevention of a zinc rich coating with electronic control.
300 $a 166 p.
500 $a Adviser: Andrew Bocarsly.
500 $a Source: Dissertation Abstracts International, Volume: 69-04, Section: B, page: 2566.
502 $a Thesis (Ph.D.)--Princeton University, 2008.
520 $a Average grain conductivity for Li-stabilized material at 150°C is 6.6x10-3 +/- 1.6x10-3 S/cm with 0.29 +/- 0.05 eV activation energy, in agreement with single crystal studies in the literature. Grain boundary conductivity is found to be higher in the Li-stabilized material. A hydrogen bond energy hypothesis is presented to explain these differences. Li-stabilized NH4+/H3O + beta-alumina is demonstrated as a fuel cell electrolyte, producing 28 muA/cm2 of electrical current at 0.5 V.
520 $a Mechanism of Enhanced Corrosion Prevention of a Zinc Rich Coating with Electronic Control. A corrosion inhibition system consisting of high weight-loading zinc rich coating applied to steel panels is examined. An electronic control unit (ECU) consisting of a battery and a large capacitor in series with the panel is shown to improve corrosion protection upon immersion in 3% NaCl solution. Weekly solution changes to avoid zinc saturation in solution system were necessary to see well differentiated results.
520 $a Proton Conducting beta-alumina via Microwave Assisted Synthesis. The microwave assisted synthesis of proton conducting Mg- and Li-stabilized NH4+/H3O+ beta-alumina from a solution based gel precursor is reported. beta-alumina is a ceramic fast ion conductor containing two-dimensional sheets of mobile cations. Na +-beta-alumina is the most stable at the sintering temperatures (1740°C) reached in a modified microwave oven, and can be ion exchanged to the K+ form and then to the NH4+/H 3O+ form. beta-phase impurity is found to be 20% for Mg-stabilized material and 30-40% for Li-stabilized material. The composition of the proton conducting form produced here is deficient in NH4 + as compared to the target composition (NH4)1.00 (H3O)0.67Mg0.67Al10.33O 17.
520 $a The corrosion product, hydrozincite [Zn5(CO3) 2(OH)6] is observed to deposit within the pores of the coating and on the surface as a barrier layer. Simonkolleite [Zn5(OH) 8Cl2·H2O] is found to form in place of the original zinc particles. The barrier layer is denser and more adherent with the ECU in place. A mechanism is proposed in which the characteristic time constant of the ECU is roughly matched to the time scale of ionic motion within the coating. The capacitive nature of the ECU retards the motion of ions, and affects the formation of denser corrosion products.
590 $a School code: 0181.
650 $a Chemistry, Inorganic. $3 197298
650 $a Engineering, Materials Science. $3 226940
690 $a 0488
690 $a 0794
710 $a Princeton University. $3 212488
773 0 $g 69-04B. $t Dissertation Abstracts International
790 $a 0181
790 1 0 $a Bocarsly, Andrew, $e advisor
791 $a Ph.D.
792 $a 2008
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3308035 $z http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3308035