國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Investigation of techniques for redu...

Clemson University.

Investigation of techniques for reducing unintentional electromagnetic emissions from electronic circuits and systems.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Investigation of techniques for reducing unintentional electromagnetic emissions from electronic circuits and systems.
作者:	Kwak, Ho-Cheol.
面頁冊數:	121 p.
附註:	Source: Dissertation Abstracts International, Volume: 72-08, Section: B, page: .
附註:	Adviser: Todd H. Hubing.
Contained By:	Dissertation Abstracts International72-08B.
標題:	Engineering, Electronics and Electrical.
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3454940
ISBN:	9781124650876

Investigation of techniques for reducing unintentional electromagnetic emissions from electronic circuits and systems.
Kwak, Ho-Cheol.

Investigation of techniques for reducing unintentional electromagnetic emissions from electronic circuits and systems. - 121 p.

Source: Dissertation Abstracts International, Volume: 72-08, Section: B, page: .

Thesis (Ph.D.)--Clemson University, 2011.

This dissertation describes three independent studies related to techniques for reducing unintentional electromagnetic emissions from electronic circuits and systems. The topics covered are: low-inductance multi-layer ceramic capacitor for high frequency circuit board decoupling, the application of imbalance difference model to various circuit board and cable geometries, and balanced cable interface for reducing common-mode currents from power inverter.

ISBN: 9781124650876Subjects--Topical Terms:

226981
Engineering, Electronics and Electrical.

Investigation of techniques for reducing unintentional electromagnetic emissions from electronic circuits and systems.
LDR:03299nmm 2200349 4500 001 309736
005 20111105132501.5
008 111212s2011 ||||||||||||||||| ||eng d
020 $a 9781124650876
035 $a (UMI)AAI3454940
035 $a AAI3454940
040 $a UMI $c UMI
100 1 $a Kwak, Ho-Cheol. $3 531085
245 1 0 $a Investigation of techniques for reducing unintentional electromagnetic emissions from electronic circuits and systems.
300 $a 121 p.
500 $a Source: Dissertation Abstracts International, Volume: 72-08, Section: B, page: .
500 $a Adviser: Todd H. Hubing.
502 $a Thesis (Ph.D.)--Clemson University, 2011.
520 $a This dissertation describes three independent studies related to techniques for reducing unintentional electromagnetic emissions from electronic circuits and systems. The topics covered are: low-inductance multi-layer ceramic capacitor for high frequency circuit board decoupling, the application of imbalance difference model to various circuit board and cable geometries, and balanced cable interface for reducing common-mode currents from power inverter.
520 $a The first chapter discusses the importance and the meaning of the connection inductance associated with MLCCs and analyzes the effect of plate orientation in MLCCs. It demonstrates that vertically oriented plates have no more or less inductance than horizontally oriented plates when the overall dimensions of the plate stack are similar. Decoupling capacitance options at the various levels of a high-speed circuit is investigated to determine the range of frequencies that decoupling at each level is likely to be is effective. Innovative low-inductance capacitive-stem capacitor configurations are described and their connection impedance is compared to that of standard surface-mounted capacitors.
520 $a The second chapter investigates the imbalance difference model that is a method for modeling how differential-mode signal currents are converted to common-mode noise currents. Various cable geometries to determine how well imbalance factor`s values of DM-to-CM conversion compare to full-wave calculations are explored. The imbalance difference model can be applied to cables with more than two conductors are demonstrated.
520 $a The third chapter investigates the balanced cable interface for reducing common-mode currents from power inverter. The concept of a balancing network to reduce the common-mode currents on power inverter cables above 30 MHz is introduced. An experimental test set-up is used to demonstrate the effect of a balancing network on the common-mode current, differential-mode current and the common-mode rejection ratio on a balanced cable with an imbalanced termination. The balancing network is also evaluated using a 3-phase brushless DC motor driver to verify its effectiveness in a real application.
590 $a School code: 0050.
650 4 $a Engineering, Electronics and Electrical. $3 226981
650 4 $a Physics, Electricity and Magnetism. $3 227483
690 $a 0544
690 $a 0607
710 2 $a Clemson University. $b Electrical & Computer Engineering. $3 531086
773 0 $t Dissertation Abstracts International $g 72-08B.
790 1 0 $a Hubing, Todd H., $e advisor
790 1 0 $a Pearson, L. Wison $e committee member
790 1 0 $a Wang, Pingshan $e committee member
790 1 0 $a Park, Chanseok $e committee member
790 $a 0050
791 $a Ph.D.
792 $a 2011
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3454940