國立高雄大學圖資館 |

Language: English

Back

應用步階式阻抗及混合電感元件傳輸線之威爾金森功率分配器 = Wilkin...

劉人權

應用步階式阻抗及混合電感元件傳輸線之威爾金森功率分配器 = Wilkinson Power Dividers Using Stepped-Impedance and Hybrid-Inductive Transmission Lines

Record Type:	Language materials, printed : monographic
Paralel Title:	Wilkinson Power Dividers Using Stepped-Impedance and Hybrid-Inductive Transmission Lines
Author:	劉人權,
Secondary Intellectual Responsibility:	國立高雄大學
Place of Publication:	[高雄市]
Published:	撰者;
Year of Publication:	2014[民103]
Description:	79面圖，表 : 30公分;
Subject:	威爾金森功率分配器
Subject:	Wilkinson power divider
Online resource:	http://handle.ncl.edu.tw/11296/ndltd/69890695660332311705
Notes:	參考書目：面67-68
Notes:	103年12月16日公開
Summary:	傳統威爾金森功率分配器主要是由兩段四分之一波長傳輸線以及一個隔離電阻所組成，因為它總是佔據電路大部分的面積，所以本論文提出應用步階式阻抗及混合電感元件傳輸線來減少電路尺寸。為了改善傳統威爾金森功率分配器截止帶響應，本研究整合了π型傳輸線架構的功率分配器，提出額外產生傳輸零點，讓它在其它所需的頻率上，抑制頻率響應，達到良好的截止帶響應。此外，所提出的新型功率分配器架構，也包含了混合T型與π型傳輸線的設計。 Conventional Wilkinson power divider is composed of two quarter-wavelength transmission-line and an isolation resistor. Because it usually needs large circuit area, this thesis proposes modified Wilkinson power dividers using stepped-impedance and hybrid-inductive transmission lines to reduce the circuit sizes. To improve the stopband response of the Conventional Wilkinson power divider, this study also integrated π-type transmission line in the proposed dividers to create extra transmission zeros for achieving favorable stopband rejection around the desired frequencies. Besides, hybrid T-type and π-type transmission lines are also included in the presented design for obtaining new dividers.

應用步階式阻抗及混合電感元件傳輸線之威爾金森功率分配器 = Wilkinson Power Dividers Using Stepped-Impedance and Hybrid-Inductive Transmission Lines
劉, 人權

應用步階式阻抗及混合電感元件傳輸線之威爾金森功率分配器 = Wilkinson Power Dividers Using Stepped-Impedance and Hybrid-Inductive Transmission Lines / 劉人權撰 - [高雄市] : 撰者, 2014[民103]. - 79面 ; 圖，表 ; 30公分.
參考書目：面67-68103年12月16日公開.
威爾金森功率分配器Wilkinson power divider

應用步階式阻抗及混合電感元件傳輸線之威爾金森功率分配器 = Wilkinson Power Dividers Using Stepped-Impedance and Hybrid-Inductive Transmission Lines
LDR:02582nam0a2200289 450 001 430209
005 20170214100948.0
009 430209
010 0 $b 精裝
010 0 $b 平裝
100 $a 20170214d2014 k y0chiy05 e
101 1 $a chi $d chi $d eng
102 $a tw
105 $a ak am 000yy
200 1 $a 應用步階式阻抗及混合電感元件傳輸線之威爾金森功率分配器 $d Wilkinson Power Dividers Using Stepped-Impedance and Hybrid-Inductive Transmission Lines $z eng $f 劉人權撰
210 $a [高雄市] $c 撰者 $d 2014[民103]
215 0 $a 79面 $c 圖，表 $d 30公分
300 $a 參考書目：面67-68
300 $a 103年12月16日公開
314 $a 指導教授：鄧卜華博士
328 $a 碩士論文--國立高雄大學電機工程學系碩士班
330 $a 傳統威爾金森功率分配器主要是由兩段四分之一波長傳輸線以及一個隔離電阻所組成，因為它總是佔據電路大部分的面積，所以本論文提出應用步階式阻抗及混合電感元件傳輸線來減少電路尺寸。為了改善傳統威爾金森功率分配器截止帶響應，本研究整合了π型傳輸線架構的功率分配器，提出額外產生傳輸零點，讓它在其它所需的頻率上，抑制頻率響應，達到良好的截止帶響應。此外，所提出的新型功率分配器架構，也包含了混合T型與π型傳輸線的設計。 Conventional Wilkinson power divider is composed of two quarter-wavelength transmission-line and an isolation resistor. Because it usually needs large circuit area, this thesis proposes modified Wilkinson power dividers using stepped-impedance and hybrid-inductive transmission lines to reduce the circuit sizes. To improve the stopband response of the Conventional Wilkinson power divider, this study also integrated π-type transmission line in the proposed dividers to create extra transmission zeros for achieving favorable stopband rejection around the desired frequencies. Besides, hybrid T-type and π-type transmission lines are also included in the presented design for obtaining new dividers.
510 1 $a Wilkinson Power Dividers Using Stepped-Impedance and Hybrid-Inductive Transmission Lines $z eng
610 0 $a 威爾金森功率分配器 $a 步階式阻抗 $a 傳輸零點 $a 電感元件 $a 傳輸線
610 1 $a Wilkinson power divider $a stepped-impedance $a transmission zeros $a hybrid-inductive $a transmission line.
681 $a 008M/0019 $b 542201 7284 $v 2007年版
700 1 $a 劉 $b 人權 $4 撰 $3 673425
712 0 2 $a 國立高雄大學 $b 電機工程學系碩士班 $3 166118
801 0 $a tw $b NUK $c 20141021 $g CCR
856 7 $z 電子資源 $2 http $u http://handle.ncl.edu.tw/11296/ndltd/69890695660332311705