國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Simulation based engineering in soli...

Rao, J.S.

Simulation based engineering in solid mechanics

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Simulation based engineering in solid mechanicsby J.S. Rao.
作者:	Rao, J.S.
出版者:	Cham :Springer International Publishing :2017.
面頁冊數:	xiv, 200 p. :ill., digital ;24 cm.
Contained By:	Springer eBooks
標題:	Mechanics.
電子資源:	http://dx.doi.org/10.1007/978-3-319-47614-8
ISBN:	9783319476148$q(electronic bk.)

Simulation based engineering in solid mechanics
Rao, J.S.

Simulation based engineering in solid mechanics[electronic resource] /by J.S. Rao. - Cham :Springer International Publishing :2017. - xiv, 200 p. :ill., digital ;24 cm.

Preface -- Introduction -- 1.1 Matrices -- 1.2 Vectors and Tensors -- 1.3 Energy Principle -- 2 Continuous Solid -- 2.1 External and Internal Tractions -- 2.2. Stress Definition -- 2.3. Equilibrium Relations -- 2.4. Strain -- 2.5. Stress -- Strain Relations -- 2.6 Strain Energy and Work -- 2.7 Von Mises Stress -- 3 Euler-Lagrange Equations -- 3.1 General Approach for solving Structural Problems -- 3.2 Other Applications of Euler-Lagrange Equation leading to Optimization -- 3.3 Derivation of Euler-Lagrange Equation through Delta Operator -- 4 Axially Loaded 1-D Structures -- 4.1 Simply Supported Bar -- 4.2 Simply Supported - Free Bar -- 4.3 Finite Element Method -- 4.4 Thermal Stresses -- 4.5 Principle of Virtual Work4.6 Minimization of Total Potential Energy -- 5 Twisting of a Rod -- 5.1 Finite Element Method for Torsion -- 5.2 Two Elements and Stiffness Matrix Assembly -- 5.3 Ritz Method for Torsion -- 6 Bending of a Beam -- 6.1 Bending by Energy Method -- 6.2 Beam with Axial Load (Beam-Column) -- 6.3 Strength of Materials Approach -- 6.4 Beam Solution by Energy Method -- 6.5 Beam Finite Element -- 6.6 Buckling revisited -- 6.7 Galerkin Method for Tapered Beams -- 6.8 General Structures by Commercial Solvers -- 7. Epilogue -- Acknowledgements -- Index.

This book begins with a brief historical perspective of the advent of rotating machinery in 20th century Solid Mechanics and the development of the discipline of the Strength of Materials. High Performance Computing (HPC) and Simulation Based Engineering Science (SBES) have gradually replaced the conventional approach in Design bringing science directly into engineering without approximations. A recap of the required mathematical principles is given. The science of deformation, strain and stress at a point under the application of external traction loads is next presented. Only one-dimensional structures classified as Bars (axial loads), Rods (twisting loads) and Beams (bending loads) are considered in this book. The principal stresses and strains and von Mises stress and strain that used in design of structures are next presented. Lagrangian solution was used to derive the governing differential equations consistent with assumed deformation field and solution for deformations, strains and stresses were obtained. The finite element method most suitable for HPC is derived and the corresponding stiffness matrix for the element is derived. Assembling procedure of these matrices is then described to obtain the system matrices. Worked examples and exercises are given in each chapter. This book brings SBES at entry level allowing young students to quickly adapt to modern design practices.

ISBN: 9783319476148$q(electronic bk.)

Standard No.: 10.1007/978-3-319-47614-8doiSubjects--Topical Terms:

200022
Mechanics.

LC Class. No.: QA805

Dewey Class. No.: 531.3

Simulation based engineering in solid mechanics
LDR:03614nmm a2200325 a 4500 001 505684
003 DE-He213
005 20170614132241.0
006 m d
007 cr nn 008maaau
008 171030s2017 gw s 0 eng d
020 $a 9783319476148$q(electronic bk.)
020 $a 9783319476131$q(paper)
024 7 $a 10.1007/978-3-319-47614-8 $2 doi
035 $a 978-3-319-47614-8
040 $a GP $c GP
041 0 $a eng
050 4 $a QA805
072 7 $a TG $2 bicssc
072 7 $a TEC009070 $2 bisacsh
072 7 $a TEC021000 $2 bisacsh
082 0 4 $a 531.3 $2 23
090 $a QA805 $b .R215 2017
100 1 $a Rao, J.S. $3 511655
245 1 0 $a Simulation based engineering in solid mechanics $h [electronic resource] / $c by J.S. Rao.
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2017.
300 $a xiv, 200 p. : $b ill., digital ; $c 24 cm.
505 0 $a Preface -- Introduction -- 1.1 Matrices -- 1.2 Vectors and Tensors -- 1.3 Energy Principle -- 2 Continuous Solid -- 2.1 External and Internal Tractions -- 2.2. Stress Definition -- 2.3. Equilibrium Relations -- 2.4. Strain -- 2.5. Stress -- Strain Relations -- 2.6 Strain Energy and Work -- 2.7 Von Mises Stress -- 3 Euler-Lagrange Equations -- 3.1 General Approach for solving Structural Problems -- 3.2 Other Applications of Euler-Lagrange Equation leading to Optimization -- 3.3 Derivation of Euler-Lagrange Equation through Delta Operator -- 4 Axially Loaded 1-D Structures -- 4.1 Simply Supported Bar -- 4.2 Simply Supported - Free Bar -- 4.3 Finite Element Method -- 4.4 Thermal Stresses -- 4.5 Principle of Virtual Work4.6 Minimization of Total Potential Energy -- 5 Twisting of a Rod -- 5.1 Finite Element Method for Torsion -- 5.2 Two Elements and Stiffness Matrix Assembly -- 5.3 Ritz Method for Torsion -- 6 Bending of a Beam -- 6.1 Bending by Energy Method -- 6.2 Beam with Axial Load (Beam-Column) -- 6.3 Strength of Materials Approach -- 6.4 Beam Solution by Energy Method -- 6.5 Beam Finite Element -- 6.6 Buckling revisited -- 6.7 Galerkin Method for Tapered Beams -- 6.8 General Structures by Commercial Solvers -- 7. Epilogue -- Acknowledgements -- Index.
520 $a This book begins with a brief historical perspective of the advent of rotating machinery in 20th century Solid Mechanics and the development of the discipline of the Strength of Materials. High Performance Computing (HPC) and Simulation Based Engineering Science (SBES) have gradually replaced the conventional approach in Design bringing science directly into engineering without approximations. A recap of the required mathematical principles is given. The science of deformation, strain and stress at a point under the application of external traction loads is next presented. Only one-dimensional structures classified as Bars (axial loads), Rods (twisting loads) and Beams (bending loads) are considered in this book. The principal stresses and strains and von Mises stress and strain that used in design of structures are next presented. Lagrangian solution was used to derive the governing differential equations consistent with assumed deformation field and solution for deformations, strains and stresses were obtained. The finite element method most suitable for HPC is derived and the corresponding stiffness matrix for the element is derived. Assembling procedure of these matrices is then described to obtain the system matrices. Worked examples and exercises are given in each chapter. This book brings SBES at entry level allowing young students to quickly adapt to modern design practices.
650 0 $a Mechanics. $3 200022
650 1 4 $a Engineering. $3 210888
650 2 4 $a Continuum Mechanics and Mechanics of Materials. $3 273691
650 2 4 $a Classical Mechanics. $3 769955
650 2 4 $a Engineering Design. $3 273752
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer eBooks
856 4 0 $u http://dx.doi.org/10.1007/978-3-319-47614-8
950 $a Engineering (Springer-11647)