國立高雄大學圖資館 |

語系: 繁體中文

說明(常見問題)

圖資館首頁

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Advances in design, simulation and m...

(1998 :)

Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 1,Manufacturing and materials engineering /

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Advances in design, simulation and manufacturing IIIedited by Vitalii Ivanov ... [et al.].
其他題名:	proceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.
其他題名:	DSMIE 2020
其他作者:	Ivanov, Vitalii.
團體作者:
出版者:	Cham :Springer International Publishing :2020.
面頁冊數:	xx, 575 p. :ill., digital ;24 cm.
Contained By:	Springer eBooks
標題:	Manufacturing processes
電子資源:	https://doi.org/10.1007/978-3-030-50794-7
ISBN:	9783030507947$q(electronic bk.)

Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 1,Manufacturing and materials engineering /
Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 1,Manufacturing and materials engineering /[electronic resource] :DSMIE 2020edited by Vitalii Ivanov ... [et al.]. - Cham :Springer International Publishing :2020. - xx, 575 p. :ill., digital ;24 cm. - Lecture notes in mechanical engineering,2195-4356. - Lecture notes in mechanical engineering..

Comparative Analysis of Platforms for Designing a Digital Twin -- Computer-Integrated Design Pistons with the Influence of Casting Defects -- Improvement of the Effectiveness of General Engineering Courses Using Trainers -- Modeling of Spindle Node Dynamics Using the Spectral Analysis Method -- Method of Design of Interference Fit Based on Complex Mathematical Modeling.

This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues. Specifically, it covers the development of CAx technologies for product design, the implementation of smart manufacturing systems and Industry 4.0 strategies, topics in technological assurance, numerical simulation and experimental studies on cutting, milling, grinding, pressing and profiling processes, as well as the development and implementation of new advanced materials. Based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020 in Kharkiv, Ukraine, this first volume in a two-volume set provides academics and professionals with extensive information on the latest trends, technologies, challenges and practice-oriented lessons learned in the above-mentioned areas.

ISBN: 9783030507947$q(electronic bk.)

Standard No.: 10.1007/978-3-030-50794-7doiSubjects--Topical Terms:

243834
Manufacturing processes

LC Class. No.: TS183

Dewey Class. No.: 670

Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 1,Manufacturing and materials engineering /
LDR:02541nmm a2200361 a 4500 001 580489
003 DE-He213
005 20201028114638.0
006 m
007 cr
008 210105s2020
020 $a 9783030507947$q(electronic bk.)
020 $a 9783030507930$q(paper)
024 7 $a 10.1007/978-3-030-50794-7 $2 doi
035 $a 978-3-030-50794-7
040 $a GP $c GP
041 0 $a eng
050 4 $a TS183
072 7 $a TGP $2 bicssc
072 7 $a TEC020000 $2 bisacsh
072 7 $a TGP $2 thema
082 0 4 $a 670 $2 23
090 $a TS183 $b .I61 2020
111 2 $n (3rd : $d 1998 : $c Amsterdam, Netherlands) $3 194767
245 1 0 $a Advances in design, simulation and manufacturing III $h [electronic resource] : $b proceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine. $n Volume 1, $p Manufacturing and materials engineering / $c edited by Vitalii Ivanov ... [et al.].
246 3 $a DSMIE 2020
246 3 0 $a Manufacturing and materials engineering
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2020.
300 $a xx, 575 p. : $b ill., digital ; $c 24 cm.
490 1 $a Lecture notes in mechanical engineering, $x 2195-4356
505 0 $a Comparative Analysis of Platforms for Designing a Digital Twin -- Computer-Integrated Design Pistons with the Influence of Casting Defects -- Improvement of the Effectiveness of General Engineering Courses Using Trainers -- Modeling of Spindle Node Dynamics Using the Spectral Analysis Method -- Method of Design of Interference Fit Based on Complex Mathematical Modeling.
520 $a This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues. Specifically, it covers the development of CAx technologies for product design, the implementation of smart manufacturing systems and Industry 4.0 strategies, topics in technological assurance, numerical simulation and experimental studies on cutting, milling, grinding, pressing and profiling processes, as well as the development and implementation of new advanced materials. Based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020 in Kharkiv, Ukraine, this first volume in a two-volume set provides academics and professionals with extensive information on the latest trends, technologies, challenges and practice-oriented lessons learned in the above-mentioned areas.
650 0 $a Manufacturing processes $3 243834
650 0 $a Manufacturing processes $x Computer simulation $v Congresses. $3 731218
650 0 $a Engineering design $3 253511
650 1 4 $a Manufacturing, Machines, Tools, Processes. $3 833130
650 2 4 $a Materials Engineering. $3 682881
650 2 4 $a Computer-Aided Engineering (CAD, CAE) and Design. $3 274500
700 1 $a Ivanov, Vitalii. $3 830114
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer eBooks
830 0 $a Lecture notes in mechanical engineering. $3 592095
856 4 0 $u https://doi.org/10.1007/978-3-030-50794-7
950 $a Engineering (Springer-11647)