國立高雄大學圖資館 |

Language: English

Back

Introduction to fracture mechanics

Record Type:	Electronic resources : Monograph/item
Title/Author:	Introduction to fracture mechanicsRobert O. Ritchie, Dong Liu.
Author:	Ritchie, R. O.
other author:	Liu, Dong.
Published:	Amsterdam, Netherlands ;Elsevier,2021.
Description:	1 online resource.
Subject:	Fracture mechanics.
Online resource:	https://www.sciencedirect.com/science/book/9780323898225
ISBN:	9780323902793 (electronic bk.)

Introduction to fracture mechanics
Ritchie, R. O.

Introduction to fracture mechanics[electronic resource] /Robert O. Ritchie, Dong Liu. - Amsterdam, Netherlands ;Elsevier,2021. - 1 online resource.

Front Cover -- INTRODUCTION TO FRACTURE MECHANICS -- INTRODUCTION TO FRACTURE MECHANICS -- Contents -- Preface -- 1 -- Introduction -- 2 -- Foundations of fracture mechanics -- 2.1 Ideal fracture strength -- 2.2 Griffith fracture theory -- 2.3 Orowan approach -- 2.4 Origins of fracture mechanics theory -- References -- 3 -- Linear-elastic fracture mechanics (LEFM) -- 3.1 Stress analysis of cracks: Williams 1/r singularity and stress-intensity factor K -- 3.1.1 Crack-tip fields -- 3.1.2 Crack-tip stress triaxiality -- 3.2 Crack-tip plasticity: plastic-zone size -- 3.3 LEFM fracture criterion.

ISBN: 9780323902793 (electronic bk.)Subjects--Topical Terms:

195871
Fracture mechanics.
Index Terms--Genre/Form:

214472
Electronic books.

LC Class. No.: TA409 / .R58 2021

Dewey Class. No.: 620.1/126

Introduction to fracture mechanics
LDR:03235cmm a2200277 a 4500 001 625023
006 m o d
007 cr |n|||||||||
008 230109s2021 cau o 000 0 eng
020 $a 9780323902793 (electronic bk.)
020 $a 0323902790 (electronic bk.)
020 $a 9780323898225
020 $a 032389822X
035 $a 022578924
040 $a EBLCP $b eng $c EBLCP $d YDX $d EBLCP $d N $d YDX $d OCLCO
041 0 $a eng
050 4 $a TA409 $b .R58 2021
082 0 4 $a 620.1/126 $2 23
100 1 $a Ritchie, R. O. $q (Robert O.) $3 440149
245 1 0 $a Introduction to fracture mechanics $h [electronic resource] / $c Robert O. Ritchie, Dong Liu.
260 $a Amsterdam, Netherlands ; $a Cambridge, MA, United States : $b Elsevier, $c 2021.
300 $a 1 online resource.
505 0 $a Front Cover -- INTRODUCTION TO FRACTURE MECHANICS -- INTRODUCTION TO FRACTURE MECHANICS -- Contents -- Preface -- 1 -- Introduction -- 2 -- Foundations of fracture mechanics -- 2.1 Ideal fracture strength -- 2.2 Griffith fracture theory -- 2.3 Orowan approach -- 2.4 Origins of fracture mechanics theory -- References -- 3 -- Linear-elastic fracture mechanics (LEFM) -- 3.1 Stress analysis of cracks: Williams 1/r singularity and stress-intensity factor K -- 3.1.1 Crack-tip fields -- 3.1.2 Crack-tip stress triaxiality -- 3.2 Crack-tip plasticity: plastic-zone size -- 3.3 LEFM fracture criterion.
505 8 $6 880-01 $a 3.3.1 KI = Kc -- 3.3.2 Plane-strain fracture -- 3.3.3 Measurement of the plane-strain fracture toughness KIc -- 3.3.4 Use of K as a fracture criterion in structures -- 3.3.5 Flat vs. slant fracture surfaces -- 3.3.6 Non fully plane-strain fracture -- 3.3.7 Accuracy of KIc -- 3.3.8 Relevance of KIc -- 3.4 G-based energy approach -- 3.4.1 Definition of G -- 3.4.2 Characterizing parameter vs. energy release rate approach -- 3.5 Crack-resistance R-curves -- 3.6 Mixed-mode fracture -- 3.6.1 Inclined cracks -- 3.6.2 Deflected cracks -- 3.6.3 Interface cracks -- 3.6.4 Mixed-mode crack-driving force.
505 8 $a 3.6.5 Crack paths -- References -- 4 -- Nonlinear-elastic fracture mechanics (NLEFM) -- 4.1 Introduction -- 4.2 Stress analysis of cracks: HRR singularity and J-integral -- 4.2.1 J as a characterizing parameter -- 4.2.2 J as a path-independent integral -- 4.2.3 J as an energy parameter -- 4.3 J as a fracture criterion -- 4.3.1 J=Jc -- 4.3.2 Importance of validity criteria (size requirements) -- 4.4 J-solutions -- 4.4.1 Deep single-edge cracked bend specimen -- 4.4.2 General form of J-solution for various specimen geometries -- 4.5 Measurement of the fracture toughness JIc.
505 8 $a 6.2.1 Ductile fracture -- 6.2.2 Brittle fracture -- 6.3 Cleavage and ductile fracture models -- 6.3.1 RKR model for cleavage fracture -- 6.3.2 Critical strain model for ductile fracture -- 6.3.3 Critical CTOA model for ductile crack growth -- 6.4 Intrinsic vs. extrinsic toughening -- 6.4.1 Toughening in metallic materials -- 6.4.2 Toughening in ceramic materials -- 6.4.3 Toughening in polymeric materials -- 6.4.4 Toughening in composite materials -- References -- 7 -- Application to subcritical crack growth -- 7.1 Introduction -- 7.2 Environmentally-assisted cracking -- 7.3 Creep-crack growth.
505 8 $a 7.3.1 C integral.
650 0 $a Fracture mechanics. $3 195871
655 4 $a Electronic books. $2 local. $3 214472
700 1 $a Liu, Dong. $3 928012
856 4 0 $u https://www.sciencedirect.com/science/book/9780323898225