國立高雄大學圖資館 |

3D printing at hospitals and medical centersa practical guide for medical professionals /

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	3D printing at hospitals and medical centersedited by Frank J. Rybicki, Jonathan M. Morris, Gerald T. Grant.
其他題名:	a practical guide for medical professionals /
其他作者:	Rybicki, Frank J.
出版者:	Cham :Springer International Publishing :2024.
面頁冊數:	x, 396 p. :ill. (some col.), digital ;24 cm.
Contained By:	Springer Nature eBook
標題:	Biomedical materialsDesign.
電子資源:	https://doi.org/10.1007/978-3-031-42851-7
ISBN:	9783031428517$q(electronic bk.)

3D printing at hospitals and medical centersa practical guide for medical professionals /
3D printing at hospitals and medical centersa practical guide for medical professionals /[electronic resource] :edited by Frank J. Rybicki, Jonathan M. Morris, Gerald T. Grant. - Second edition. - Cham :Springer International Publishing :2024. - x, 396 p. :ill. (some col.), digital ;24 cm.

Foreword to the 2nd Edition -- Chapter 1 Introduction -- Chapter 2 Image processing including software considerations for medical 3D printing -- Chapter 3 Pre-processing and Preparation of Medical 3D Printed Models -- Chapter 4 3D Printing Technologies and Materials -- Chapter 5 Thoracic 3D Printing -- Chapter 6 Cardiac 3D Printing -- Chapter 7 Musculoskeletal 3D Printing -- Chapter 8 3D Printing in Oral and Maxillofacial Surgery -- Chapter 9 Case Examples of Advanced 3D Printing in Hospitals and Medical Centers -- Chapter 10 3D Printing and Digital Design for Maxillofacial Prosthetics -- Chapter 11 Patient-Specific Planning in Head and Neck Reconstruction including Virtual Reality -- Chapter 12 3D Printing and Neurotechnology in Cranial Reconstruction -- Chapter 13 3D Printing in Neurosurgery and Neurovascular Intervention -- Chapter 14 Application of 3D printing in the Spine -- Chapter 15 Applications of 3D printing in the Abdomen and Pelvis -- Chapter 16 3D Printing in the Management of Breast Cancer -- Chapter 17 Radiological Society of North America (RNSA) - American College of Radiology (ACR) 3D Printing Registry -- Chapter 18 Establishing a Medical 3D Printing Lab and Considerations for Ensuring Quality of the 3D Printed Medical Parts -- Chapter 19 3D Printing in Medical Education -- Chapter 20 Biofabricated Tissues & Organs -- Chapter 21 FDA Regulatory Pathways and Technical Considerations for the 3D Printing of Medical Models and Devices -- Chapter 22 Augmented & Virtual Reality in Medicine -- Back matter and after word (in memoriam)

This new edition describes the fundamentals of three-dimensional (3D) printing as applied to medicine and extends the scope of the first edition of 3D Printing in Medicine to include modern 3D printing within Health Care Facilities, also called at the medical "Point-Of-Care" (POC) This edition addresses the practical considerations for, and scope of hospital 3D printing facilities, image segmentation and post-processing for Computer Aided Design (CAD) and 3D printing. The book provides details regarding technologies and materials for medical applications of 3D printing, as well as practical tips of value for physicians, engineers, and technologists. Individual, comprehensive chapters span all major organ systems that are 3D printed, including cardiovascular, musculoskeletal, craniomaxillofacial, spinal, neurological, thoracic, and abdominal. The fabrication of maxillofacial prosthetics, the planning of head and neck reconstructions, and 3D printed medical devices used in cranial reconstruction are also addressed. The second edition also includes guidelines and regulatory considerations, costs and reimbursement for medical 3D printing, quality assurance, and additional applications of CAD such as virtual reality. There is a new Forward written by Ron Kikinis, PhD and a new Afterword written by Michael W. Vannier, MD. This book offers radiologists, surgeons, and other physicians a rich source of information on the practicalities and expanding medical applications of 3D printing. It will also serve engineers, physicist, technologists, and hospital administrators who undertake 3D printing. The second edition is designed as a textbook and is expected to serve in this capacity to fill educational needs in both the medical and engineering sectors.

ISBN: 9783031428517$q(electronic bk.)

Standard No.: 10.1007/978-3-031-42851-7doiSubjects--Topical Terms:

928320
Biomedical materials
--Design.

LC Class. No.: R857.T47

Dewey Class. No.: 616.0754

3D printing at hospitals and medical centersa practical guide for medical professionals /
LDR:04421nmm a22003375a 4500 001 665444
003 DE-He213
005 20240418202452.0
006 m d
007 cr nn 008maaau
008 241219s2024 sz s 0 eng d
020 $a 9783031428517$q(electronic bk.)
020 $a 9783031428500$q(paper)
024 7 $a 10.1007/978-3-031-42851-7 $2 doi
035 $a 978-3-031-42851-7
040 $a GP $c GP
041 0 $a eng
050 4 $a R857.T47
072 7 $a MMP $2 bicssc
072 7 $a MED080000 $2 bisacsh
072 7 $a MKS $2 thema
082 0 4 $a 616.0754 $2 23
090 $a R857.T47 $b A111 2024
245 0 0 $a 3D printing at hospitals and medical centers $h [electronic resource] : $b a practical guide for medical professionals / $c edited by Frank J. Rybicki, Jonathan M. Morris, Gerald T. Grant.
250 $a Second edition.
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2024.
300 $a x, 396 p. : $b ill. (some col.), digital ; $c 24 cm.
505 0 $a Foreword to the 2nd Edition -- Chapter 1 Introduction -- Chapter 2 Image processing including software considerations for medical 3D printing -- Chapter 3 Pre-processing and Preparation of Medical 3D Printed Models -- Chapter 4 3D Printing Technologies and Materials -- Chapter 5 Thoracic 3D Printing -- Chapter 6 Cardiac 3D Printing -- Chapter 7 Musculoskeletal 3D Printing -- Chapter 8 3D Printing in Oral and Maxillofacial Surgery -- Chapter 9 Case Examples of Advanced 3D Printing in Hospitals and Medical Centers -- Chapter 10 3D Printing and Digital Design for Maxillofacial Prosthetics -- Chapter 11 Patient-Specific Planning in Head and Neck Reconstruction including Virtual Reality -- Chapter 12 3D Printing and Neurotechnology in Cranial Reconstruction -- Chapter 13 3D Printing in Neurosurgery and Neurovascular Intervention -- Chapter 14 Application of 3D printing in the Spine -- Chapter 15 Applications of 3D printing in the Abdomen and Pelvis -- Chapter 16 3D Printing in the Management of Breast Cancer -- Chapter 17 Radiological Society of North America (RNSA) - American College of Radiology (ACR) 3D Printing Registry -- Chapter 18 Establishing a Medical 3D Printing Lab and Considerations for Ensuring Quality of the 3D Printed Medical Parts -- Chapter 19 3D Printing in Medical Education -- Chapter 20 Biofabricated Tissues & Organs -- Chapter 21 FDA Regulatory Pathways and Technical Considerations for the 3D Printing of Medical Models and Devices -- Chapter 22 Augmented & Virtual Reality in Medicine -- Back matter and after word (in memoriam)
520 $a This new edition describes the fundamentals of three-dimensional (3D) printing as applied to medicine and extends the scope of the first edition of 3D Printing in Medicine to include modern 3D printing within Health Care Facilities, also called at the medical "Point-Of-Care" (POC) This edition addresses the practical considerations for, and scope of hospital 3D printing facilities, image segmentation and post-processing for Computer Aided Design (CAD) and 3D printing. The book provides details regarding technologies and materials for medical applications of 3D printing, as well as practical tips of value for physicians, engineers, and technologists. Individual, comprehensive chapters span all major organ systems that are 3D printed, including cardiovascular, musculoskeletal, craniomaxillofacial, spinal, neurological, thoracic, and abdominal. The fabrication of maxillofacial prosthetics, the planning of head and neck reconstructions, and 3D printed medical devices used in cranial reconstruction are also addressed. The second edition also includes guidelines and regulatory considerations, costs and reimbursement for medical 3D printing, quality assurance, and additional applications of CAD such as virtual reality. There is a new Forward written by Ron Kikinis, PhD and a new Afterword written by Michael W. Vannier, MD. This book offers radiologists, surgeons, and other physicians a rich source of information on the practicalities and expanding medical applications of 3D printing. It will also serve engineers, physicist, technologists, and hospital administrators who undertake 3D printing. The second edition is designed as a textbook and is expected to serve in this capacity to fill educational needs in both the medical and engineering sectors.
650 0 $a Biomedical materials $x Design. $3 928320
650 0 $a Biomedical materials $x Technological innovations. $3 793049
650 0 $a Three-dimensional imaging in medicine. $3 384596
650 0 $a Three-dimensional printing. $3 577142
650 1 4 $a Radiology. $3 188995
650 2 4 $a Surgery. $3 274153
700 1 $a Rybicki, Frank J. $3 793047
700 1 $a Morris, Jonathan. $3 526839
700 1 $a Grant, Gerald T. $3 793048
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer Nature eBook
856 4 0 $u https://doi.org/10.1007/978-3-031-42851-7
950 $a Medicine (SpringerNature-11650)