國立高雄大學圖資館 |

Materials science and manufacturing technology (4th edition)selected peer-reviewed extended articles based on abstracts presented at the Fourth International Conference on Materials Science and Manufacturing Technology (ICMSMT 2022) : aggregated book /

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Materials science and manufacturing technology (4th edition)edited by Dr. Ramya Muthusamy and Dr. Thangaprakash Sengodan.
其他題名:	selected peer-reviewed extended articles based on abstracts presented at the Fourth International Conference on Materials Science and Manufacturing Technology (ICMSMT 2022) : aggregated book /
其他作者:	Muthusamy, Ramya.
團體作者:
出版者:	Baech, Switzerland :Scientific.Net :c2023.
面頁冊數:	1 online resource (608 p.) :ill.
標題:	Materials scienceCongresses.
電子資源:	https://portal.igpublish.com/iglibrary/search/TTP0000578.html
ISBN:	9783036410012$q(electronic bk.)

Materials science and manufacturing technology (4th edition)selected peer-reviewed extended articles based on abstracts presented at the Fourth International Conference on Materials Science and Manufacturing Technology (ICMSMT 2022) : aggregated book /
Materials science and manufacturing technology (4th edition)selected peer-reviewed extended articles based on abstracts presented at the Fourth International Conference on Materials Science and Manufacturing Technology (ICMSMT 2022) : aggregated book /[electronic resource] :edited by Dr. Ramya Muthusamy and Dr. Thangaprakash Sengodan. - 4th ed. - Baech, Switzerland :Scientific.Net :c2023. - 1 online resource (608 p.) :ill. - Scientific books collection ;vol. 38. - Scientific books collection ;vol. 38..

Includes bibliographical references and index.

Materials science and manufacturing technology, (4th edition) -- Preface -- Table of Contents -- Chapter 1: Metal Materials Properties and Processing -- Numerical Analysis of Surface Integrity in Parallel Turning Process Part II: Influence of Cutting Tool Rake Angle -- Surface Roughness Prediction of AISI 304 Steel in Nano Fluid Assisted Turning Using Machine Learning Technique -- A Model for Residual Stress in the Dry Turning of Duplex Stainless Steels -- Indigenous Production of Porous 316L through Powder Metallurgy and Investigation of their Mechanical Properties -- Experimental and Analytical Investigation into Cutting Forces during Turning of EN-31 Steel in Different Machining Conditions -- Comparative Study of Cu-6Sn Processed by Casting and Powder Metallurgy with Microwave and Conventional Assisted Sintering -- Influence of Mg Content on the Metallurgical, Hardness, and Tensile Behaviour of Zn-Al-Si-Mg Alloy in the As-Cast Condition -- Submerged Friction Stir Back Extrusion of AZ31 Magnesium Alloy -- Comparative Analysis of Stationary and Rotary Electrode on Dry EDM in Machining of Hastelloy C276 -- Multi-Objective Optimization of Metal Removal Rate, Dimensional and Profile Accuracy during Drilling of ASTM A516 (Grade70) Steel -- Chapter 2: Technologies of Welding Production -- Optimization of Resistance Spot Welding Parameters in a Shop Floor Environment to Achieve Desired Spot Size in Low Carbon Steel Sheet -- Optimization of Process Variables for Prediction of Penetration Depth of HSLA Steel Welds Using Response Surface Methodology -- Microstructural and Mechanical Properties of Dissimilar Aluminium Alloys by Friction Stir Welding -- Analysis of Thermal Fields, Weld Strength and Microstructural Studies of Friction Stir Dissimilar Weldments of AA6082 and AA7075 -- Mechanical and Metallurgical Characteristics of Rotary Friction Welded Low Carbon Steel Plate/Rod Joints -- Chapter 3: Coatings and Corrosion Protection -- A Novel Approach for Proximate Analysis of Soil Corrosion Condition in Imadol-Sanagaun and Kantipur Colony Areas of Nepal -- Corrosion Inhibition Data and Statistical Analysis of the Performance of Rosemary Oil Extract on High Carbon Steel in Dilute Electrolyte Solutions -- Inhibition Reaction Behaviour of Combined Grapefruit and Lemongrass Plant Distillates on Plain Carbon Steel Degradation -- Investigating the Effect of Producer Gas in Pipelines of Downdraft Gasifier -- Recovery of Hydro Turbines: From Welding to Additive Manufacturing -- Acacia nilotica - A Mild Steel Corrosion Inhibitor in Sulphuric Acid Medium -- Effect of Boronizing and WC Coating on the High Temperature Mechanical Behavior of AISI 321 Stainless Steel -- Chapter 4: Polymers, Composites and Ceramics -- Electrical Response of Ba0.7Ca0.3TiO3-BaZr0.2Ti0.8O3 Solid Solution -- Fabrication of Poly(Vinyl) Alcohol-Cellulose Nanocrystal Hybrid Aerogel -- Fabrication of AA7050 Hybrid Composite Reinforced with Nano Al2O3/ Micro ZrO2 Particles by Stir Casting Method and Study of Mechanical and Tribological Properties -- Synthesis and Characterization of Isothiocyanate Poly(Methyl Eugenol) and Thiosemicarbazide Poly(Methyl Eugenol) -- Application of Friction Stir Spot Welding on Additive Manufactured Carbon Fiber Composite -- Analysis of Mass Concentration and Morphology of Fume Particles during ECDM of CFRP Composites -- Wear Optimization of Aluminium and Hybrid Reinforcement Metal Matrix Composites Using Response Surface Methodology -- Effective Complex Permittivity of Random Composite Media: PVDF/(Na1/2Bi1/2)TiO3 -- Antimicrobial Biodegradable Polymeric Materials for Food Packaging Applications: Current Status and Future Directions -- Structural and Electric Properties of Ba-Fe-Ta-Na-Bi-Ti-O Ceramic System -- Investigation on Mechanical Properties of Regular and Engineered Fiber Built up Polymer Composites -- Evaluation of Tensile and Flexural Properties of Unidirectional Glass-Epoxy Laminate with Aluminium Oxide and Magnesium Hydroxide as Filler Materials -- Density, Hardness, and Wear Responses of Rice Husk Ash Reinforced Aluminium Composites -- Microstructure and Mechanical Behavior of Chromium Oxide Reinforced LM26 Based Metal Matrix Composites -- Shear Thickening Fluids, Nano-Polymer Materials and their Application Methods for Textile Substrates -- Chapter 5: Materials for Electronics -- Optical and Electrical Characterization of Polymer Dispersed Nematic Liquid Crystals -- Suppress Short Channel Effects on Split Channel-Cylindrical GAA TFET Using Buried Oxide Layer -- Spray Pyrolyzed Praseodymium Doped SnO2 Thin Film with Fast Response to LPG: Analysis Based on Microstructural Features -- Optical, Structural and Ethanol Sensing Properties of Spin-Coated ZnO Film -- Chapter 6: Luminescent Materials -- Fabrication of W-LEDs by Coating Tri-Color Inorganic Phosphors on UV-Diode -- A Review of the Synthesis, Performance, and Mechanism of Strontium Based Mechanoluminescence Material -- Mechanoluminescence Sensor - An Exhaustive Review -- Long Persistent Afterglow Luminescence in Gd3Al3Ga2O12:Ce3+, Green Emitting Aluminate Phosphor -- Chapter 7: Organic Synthesis -- Microwave Irradiated, Sodium Aluminate Supported and Zinc Catalyzed Suzuki-Miyaura Cross-Coupling Reaction on Fused Tricyclic Oxa-Aza-Quinolone: A Green Protocol -- Solvent Effects on the UV-Visible Absorption and Emission of Tris[4-Diethylamino)Phenyl]amine -- Chapter 8: Materials Physics and Computational Materials Science -- Theoretical Analysis of the Thermodynamic, Structural, Surface and Transport Properties of PbSn Liquid Alloys at 1050 K -- Structural Evolution of Single-Walled Carbon Nanotubes: Molecular Dynamics Simulation -- High Temperature Stability of K-Pb Liquid Alloy -- Intensity Dependent Transient Response of Amorphous Photodiode and Solar Cell -- Chapter 9: Building Materials -- Coal Ash and Rice Husk Ash Binder for Manufacturing Hollow Blocks -- Flexural Behaviors of Modified Recycled Aggregate Concrete Reinforced with Pultruded GFRP -- Numerical Investigation of the Effects of Opening on the Strength of Masonry Wall -- Chapter 10: Research and Modeling of Machines and Equipment -- Study of Effect of Weight Variation on Shape and Material Allocation on Heterogeneous NURBS Surface and Hyperpatch -- CFD Modeling of Waste Heat Recovery System to Dry Sand Mold at G-7 Trading and Industry PLC, Ethiopia -- Transient Thermal and Structural Analysis of Indian Two-Wheeler Disc Brakes -- Crack Identification and Trajectory Planning for Automatic Gas Metal Arc Welding -- Performance Analysis of a Perturbed Circular DRA for Different Dielectric Materials -- Creep Analysis of Thick Walled Cylinder under Constant Internal Pressure -- Design and Analysis of Electric Bike Chassis Using Glass Fibre Composites -- Taguchi Analysis of Natural Frequency for Simply Supported Composite Stiffened Hypars with Perforation -- Keyword Index -- Author Index.

Access restricted to authorized users and institutions.

Materials and technologies are significant elements for all kinds of high-tech industries that pave the road for advancements in the manufacturing area. With the rapid development of computer technologies, communications, and network technology, the traditional manufacturing process has evolved into intelligent, more technologically flexible and efficient manufacturing. This book is a collection of research articles on recent materials science, manufacturing technologies, and machine design advancements. The articles presented here were selected from the Fourth International Conference on Materials Science and Manufacturing Technology 2022 (ICMSMT 2022, April 8-9, 2022, Coimbatore, Tamil Nadu, India). Steel, Alloy, Polymer, Composite, Ceramics, Mechanical Properties, Tuning, Cutting, Casting, Powder Metallurgy, Friction Stir Processing, Welding, Coating, Corrosion Protection, Liquid Crystal, Thin Film, Computational Materials Science, Luminescence, Organic Synthesis, Building Materials, Applied Mechanics, Structural Analysis, Mechanical Engineering Materials Science, Building Materials, Mechanical Engineering.

Mode of access: World Wide Web.

ISBN: 9783036410012$q(electronic bk.)Subjects--Topical Terms:

451093
Materials science
--Congresses.

LC Class. No.: TA401.3

Dewey Class. No.: 620.11

Materials science and manufacturing technology (4th edition)selected peer-reviewed extended articles based on abstracts presented at the Fourth International Conference on Materials Science and Manufacturing Technology (ICMSMT 2022) : aggregated book /
LDR:09357nmm a2200313 a 4500 001 681051
005 20250909072503.0
006 m eo d
007 cr cn |||m|||a
008 251118s2023 sz ob 101 0 eng
020 $a 9783036410012$q(electronic bk.)
020 $z 9783036400013$q(pbk.)
020 $z 303640001X$q(pbk.)
035 $a 0000578
040 $a DLC $b eng $c DLC $d DLC
041 0 $a eng
050 0 0 $a TA401.3
082 0 0 $a 620.11 $2 23
111 2 $n (3rd : $d 1998 : $c Amsterdam, Netherlands) $3 194767
245 1 0 $a Materials science and manufacturing technology (4th edition) $h [electronic resource] : $b selected peer-reviewed extended articles based on abstracts presented at the Fourth International Conference on Materials Science and Manufacturing Technology (ICMSMT 2022) : aggregated book / $c edited by Dr. Ramya Muthusamy and Dr. Thangaprakash Sengodan.
250 $a 4th ed.
260 $a Baech, Switzerland : $b Scientific.Net : $b distributed worldwide by Trans Tech Publications Ltd., $c c2023.
300 $a 1 online resource (608 p.) : $b ill.
490 1 $a Scientific books collection ; $v vol. 38
504 $a Includes bibliographical references and index.
505 0 $a Materials science and manufacturing technology, (4th edition) -- Preface -- Table of Contents -- Chapter 1: Metal Materials Properties and Processing -- Numerical Analysis of Surface Integrity in Parallel Turning Process Part II: Influence of Cutting Tool Rake Angle -- Surface Roughness Prediction of AISI 304 Steel in Nano Fluid Assisted Turning Using Machine Learning Technique -- A Model for Residual Stress in the Dry Turning of Duplex Stainless Steels -- Indigenous Production of Porous 316L through Powder Metallurgy and Investigation of their Mechanical Properties -- Experimental and Analytical Investigation into Cutting Forces during Turning of EN-31 Steel in Different Machining Conditions -- Comparative Study of Cu-6Sn Processed by Casting and Powder Metallurgy with Microwave and Conventional Assisted Sintering -- Influence of Mg Content on the Metallurgical, Hardness, and Tensile Behaviour of Zn-Al-Si-Mg Alloy in the As-Cast Condition -- Submerged Friction Stir Back Extrusion of AZ31 Magnesium Alloy -- Comparative Analysis of Stationary and Rotary Electrode on Dry EDM in Machining of Hastelloy C276 -- Multi-Objective Optimization of Metal Removal Rate, Dimensional and Profile Accuracy during Drilling of ASTM A516 (Grade70) Steel -- Chapter 2: Technologies of Welding Production -- Optimization of Resistance Spot Welding Parameters in a Shop Floor Environment to Achieve Desired Spot Size in Low Carbon Steel Sheet -- Optimization of Process Variables for Prediction of Penetration Depth of HSLA Steel Welds Using Response Surface Methodology -- Microstructural and Mechanical Properties of Dissimilar Aluminium Alloys by Friction Stir Welding -- Analysis of Thermal Fields, Weld Strength and Microstructural Studies of Friction Stir Dissimilar Weldments of AA6082 and AA7075 -- Mechanical and Metallurgical Characteristics of Rotary Friction Welded Low Carbon Steel Plate/Rod Joints -- Chapter 3: Coatings and Corrosion Protection -- A Novel Approach for Proximate Analysis of Soil Corrosion Condition in Imadol-Sanagaun and Kantipur Colony Areas of Nepal -- Corrosion Inhibition Data and Statistical Analysis of the Performance of Rosemary Oil Extract on High Carbon Steel in Dilute Electrolyte Solutions -- Inhibition Reaction Behaviour of Combined Grapefruit and Lemongrass Plant Distillates on Plain Carbon Steel Degradation -- Investigating the Effect of Producer Gas in Pipelines of Downdraft Gasifier -- Recovery of Hydro Turbines: From Welding to Additive Manufacturing -- Acacia nilotica - A Mild Steel Corrosion Inhibitor in Sulphuric Acid Medium -- Effect of Boronizing and WC Coating on the High Temperature Mechanical Behavior of AISI 321 Stainless Steel -- Chapter 4: Polymers, Composites and Ceramics -- Electrical Response of Ba0.7Ca0.3TiO3-BaZr0.2Ti0.8O3 Solid Solution -- Fabrication of Poly(Vinyl) Alcohol-Cellulose Nanocrystal Hybrid Aerogel -- Fabrication of AA7050 Hybrid Composite Reinforced with Nano Al2O3/ Micro ZrO2 Particles by Stir Casting Method and Study of Mechanical and Tribological Properties -- Synthesis and Characterization of Isothiocyanate Poly(Methyl Eugenol) and Thiosemicarbazide Poly(Methyl Eugenol) -- Application of Friction Stir Spot Welding on Additive Manufactured Carbon Fiber Composite -- Analysis of Mass Concentration and Morphology of Fume Particles during ECDM of CFRP Composites -- Wear Optimization of Aluminium and Hybrid Reinforcement Metal Matrix Composites Using Response Surface Methodology -- Effective Complex Permittivity of Random Composite Media: PVDF/(Na1/2Bi1/2)TiO3 -- Antimicrobial Biodegradable Polymeric Materials for Food Packaging Applications: Current Status and Future Directions -- Structural and Electric Properties of Ba-Fe-Ta-Na-Bi-Ti-O Ceramic System -- Investigation on Mechanical Properties of Regular and Engineered Fiber Built up Polymer Composites -- Evaluation of Tensile and Flexural Properties of Unidirectional Glass-Epoxy Laminate with Aluminium Oxide and Magnesium Hydroxide as Filler Materials -- Density, Hardness, and Wear Responses of Rice Husk Ash Reinforced Aluminium Composites -- Microstructure and Mechanical Behavior of Chromium Oxide Reinforced LM26 Based Metal Matrix Composites -- Shear Thickening Fluids, Nano-Polymer Materials and their Application Methods for Textile Substrates -- Chapter 5: Materials for Electronics -- Optical and Electrical Characterization of Polymer Dispersed Nematic Liquid Crystals -- Suppress Short Channel Effects on Split Channel-Cylindrical GAA TFET Using Buried Oxide Layer -- Spray Pyrolyzed Praseodymium Doped SnO2 Thin Film with Fast Response to LPG: Analysis Based on Microstructural Features -- Optical, Structural and Ethanol Sensing Properties of Spin-Coated ZnO Film -- Chapter 6: Luminescent Materials -- Fabrication of W-LEDs by Coating Tri-Color Inorganic Phosphors on UV-Diode -- A Review of the Synthesis, Performance, and Mechanism of Strontium Based Mechanoluminescence Material -- Mechanoluminescence Sensor - An Exhaustive Review -- Long Persistent Afterglow Luminescence in Gd3Al3Ga2O12:Ce3+, Green Emitting Aluminate Phosphor -- Chapter 7: Organic Synthesis -- Microwave Irradiated, Sodium Aluminate Supported and Zinc Catalyzed Suzuki-Miyaura Cross-Coupling Reaction on Fused Tricyclic Oxa-Aza-Quinolone: A Green Protocol -- Solvent Effects on the UV-Visible Absorption and Emission of Tris[4-Diethylamino)Phenyl]amine -- Chapter 8: Materials Physics and Computational Materials Science -- Theoretical Analysis of the Thermodynamic, Structural, Surface and Transport Properties of PbSn Liquid Alloys at 1050 K -- Structural Evolution of Single-Walled Carbon Nanotubes: Molecular Dynamics Simulation -- High Temperature Stability of K-Pb Liquid Alloy -- Intensity Dependent Transient Response of Amorphous Photodiode and Solar Cell -- Chapter 9: Building Materials -- Coal Ash and Rice Husk Ash Binder for Manufacturing Hollow Blocks -- Flexural Behaviors of Modified Recycled Aggregate Concrete Reinforced with Pultruded GFRP -- Numerical Investigation of the Effects of Opening on the Strength of Masonry Wall -- Chapter 10: Research and Modeling of Machines and Equipment -- Study of Effect of Weight Variation on Shape and Material Allocation on Heterogeneous NURBS Surface and Hyperpatch -- CFD Modeling of Waste Heat Recovery System to Dry Sand Mold at G-7 Trading and Industry PLC, Ethiopia -- Transient Thermal and Structural Analysis of Indian Two-Wheeler Disc Brakes -- Crack Identification and Trajectory Planning for Automatic Gas Metal Arc Welding -- Performance Analysis of a Perturbed Circular DRA for Different Dielectric Materials -- Creep Analysis of Thick Walled Cylinder under Constant Internal Pressure -- Design and Analysis of Electric Bike Chassis Using Glass Fibre Composites -- Taguchi Analysis of Natural Frequency for Simply Supported Composite Stiffened Hypars with Perforation -- Keyword Index -- Author Index.
506 $a Access restricted to authorized users and institutions.
520 $a Materials and technologies are significant elements for all kinds of high-tech industries that pave the road for advancements in the manufacturing area. With the rapid development of computer technologies, communications, and network technology, the traditional manufacturing process has evolved into intelligent, more technologically flexible and efficient manufacturing. This book is a collection of research articles on recent materials science, manufacturing technologies, and machine design advancements. The articles presented here were selected from the Fourth International Conference on Materials Science and Manufacturing Technology 2022 (ICMSMT 2022, April 8-9, 2022, Coimbatore, Tamil Nadu, India). Steel, Alloy, Polymer, Composite, Ceramics, Mechanical Properties, Tuning, Cutting, Casting, Powder Metallurgy, Friction Stir Processing, Welding, Coating, Corrosion Protection, Liquid Crystal, Thin Film, Computational Materials Science, Luminescence, Organic Synthesis, Building Materials, Applied Mechanics, Structural Analysis, Mechanical Engineering Materials Science, Building Materials, Mechanical Engineering.
538 $a Mode of access: World Wide Web.
588 $a Description based on print version record.
650 0 $a Materials science $v Congresses. $3 451093
650 0 $a Production engineering $v Problems, exercises, etc. $3 445724
700 1 $a Muthusamy, Ramya. $3 993831
700 1 $a Sengodan, Thangaprakash. $3 877146
830 0 $a Scientific books collection ; $v vol. 38. $3 993832
856 4 0 $u https://portal.igpublish.com/iglibrary/search/TTP0000578.html