國立高雄大學圖資館 |

Language: English

Back

Harmonic modeling of voltage source converters using simple numerical methods

Record Type:	Electronic resources : Monograph/item
Title/Author:	Harmonic modeling of voltage source converters using simple numerical methodsRyan Kuo-Lung Lia ... [et al.]
other author:	Lian, Ryan Kuo-Lung.
Published:	Hoboken, NJ :John Wiley & Sons :c2022.
Description:	1 online resource (419 p.)
Notes:	"IEEE Press"--cover.
Subject:	Harmonics (Electric waves)Mathematical models.
Online resource:	https://onlinelibrary.wiley.com/doi/book/10.1002/9781119527190
ISBN:	9781119527190$q(electronic bk.)

Harmonic modeling of voltage source converters using simple numerical methods
Harmonic modeling of voltage source converters using simple numerical methods[electronic resource] /Ryan Kuo-Lung Lia ... [et al.] - 1st ed. - Hoboken, NJ :John Wiley & Sons :c2022. - 1 online resource (419 p.)

"IEEE Press"--cover.

Includes bibliographical references and index.

"The ac electric power systems are essentially designed to operate with sinusoidal voltages and currents at frequencies of 50 or 60 Hz. However, certain types of power components or loads produce currents and voltages with frequencies that are integer multiples of these frequencies (i.e. the fundamental frequencies). These higher frequencies are a form of electrical pollution known as power system harmonics. Power system harmonics are not a new phenomenon, and it is as old as the distribution of alternating current, which began in 1895-1896 [5]. It is reported that in 1893, Charles Proteus Steinmetz had worked on the problem of motor heating while working at Thomson-Houston [6]. After rigorous calculations and experimental validation, Steinmetz concluded that the problem was due to the resonance in the transmission circuit feeding the plant and a generator with a substantial amount of waveform distortion. Consequently, Steinmetz proposed two solutions to overcome this harmonic problem. The first was to reduce the system frequency to one-half of its original value. That is, to reduce the original frequency value of 125 Hz to a new value of 62.5 Hz. Note that at that time, most of the single-phase generator were operated at 125 Hz, 140 Hz or 1331"--

ISBN: 9781119527190$q(electronic bk.)Subjects--Topical Terms:

996199
Harmonics (Electric waves)
--Mathematical models.

LC Class. No.: TK2799 / .L536 2021

Dewey Class. No.: 621.3815322

Harmonic modeling of voltage source converters using simple numerical methods
LDR:02493cmm a2200325 a 4500 001 682403
005 20251017072503.0
006 m o d
007 cr cnu---unuuu
008 251202s2022 nju ob 001 0 eng d
020 $a 9781119527190$q(electronic bk.)
020 $a 1119527198$q(electronic bk.)
020 $a 9781119527152$q(electronic bk. ;$qepub)
020 $a 1119527155$q(electronic bk. ;$qepub)
020 $a 9781119527145$q(electronic bk. ;$qadobe pdf)
020 $a 1119527147$q(electronic bk. ;$qadobe pdf)
020 $z 9781119527138$q(hardback)
035 $a 9781119527190
040 $a MiAaPQ $b eng $c MiAaPQ $d MiAaPQ
041 0 $a eng
050 4 $a TK2799 $b .L536 2021
082 0 4 $a 621.3815322 $2 23
245 0 0 $a Harmonic modeling of voltage source converters using simple numerical methods $h [electronic resource] / $c Ryan Kuo-Lung Lia ... [et al.]
250 $a 1st ed.
260 $a Hoboken, NJ : $b John Wiley & Sons : $b IEEE, $c c2022.
300 $a 1 online resource (419 p.)
500 $a "IEEE Press"--cover.
504 $a Includes bibliographical references and index.
520 $a "The ac electric power systems are essentially designed to operate with sinusoidal voltages and currents at frequencies of 50 or 60 Hz. However, certain types of power components or loads produce currents and voltages with frequencies that are integer multiples of these frequencies (i.e. the fundamental frequencies). These higher frequencies are a form of electrical pollution known as power system harmonics. Power system harmonics are not a new phenomenon, and it is as old as the distribution of alternating current, which began in 1895-1896 [5]. It is reported that in 1893, Charles Proteus Steinmetz had worked on the problem of motor heating while working at Thomson-Houston [6]. After rigorous calculations and experimental validation, Steinmetz concluded that the problem was due to the resonance in the transmission circuit feeding the plant and a generator with a substantial amount of waveform distortion. Consequently, Steinmetz proposed two solutions to overcome this harmonic problem. The first was to reduce the system frequency to one-half of its original value. That is, to reduce the original frequency value of 125 Hz to a new value of 62.5 Hz. Note that at that time, most of the single-phase generator were operated at 125 Hz, 140 Hz or 1331"-- $c Provided by publisher.
588 $a Description based on print version record.
650 0 $a Harmonics (Electric waves) $x Mathematical models. $3 996199
650 0 $a Electromagnetic interference $x Mathematical models. $3 238341
650 0 $a Electric power-plants $x Equipment and supplies. $3 721890
650 0 $a Electric current converters $x Mathematical models. $3 561098
650 0 $a Numerical analysis. $3 182073
700 1 $a Lian, Ryan Kuo-Lung. $3 996198
856 4 0 $u https://onlinelibrary.wiley.com/doi/book/10.1002/9781119527190