國立高雄大學圖資館 |

Language: English

Back

Advances in design, simulation and manufacturing VIIIproceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.Volume 1,mechanical engineering /

Record Type:	Electronic resources : Monograph/item
Title/Author:	Advances in design, simulation and manufacturing VIIIedited by Raul D. Campilho ... [et al.].
Reminder of title:	proceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.
remainder title:	DSMIE-2025
other author:	Campilho, Raul D.
corporate name:
Published:	Cham :Springer Nature Switzerland :2025.
Description:	xv, 282 p. :ill. (some col.), digital ;24 cm.
Contained By:	Springer Nature eBook
Subject:	Manufacturing processes
Online resource:	https://doi.org/10.1007/978-3-031-95218-0
ISBN:	9783031952180$q(electronic bk.)

Advances in design, simulation and manufacturing VIIIproceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.Volume 1,mechanical engineering /
Advances in design, simulation and manufacturing VIIIproceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.Volume 1,mechanical engineering /[electronic resource] :DSMIE-2025edited by Raul D. Campilho ... [et al.]. - Cham :Springer Nature Switzerland :2025. - xv, 282 p. :ill. (some col.), digital ;24 cm. - Lecture notes in mechanical engineering,2195-4364. - Lecture notes in mechanical engineering..

Implementation of Auxiliary Inner Tube Feeding System for Reduce Cycle Time and Stabilize the Workflow -- Investigation of the Process of Making Applesauce and Development the Device for its Implementation -- Recapitulating the Mechanical Anisotropy of the Spinal Cord via 3D Printing and Sinusoidal Scaffold Design -- Application of Catenary Curve Principles in the Design of the Low-Floor Bus Body Cross-Section -- Technological Solutions for Increasing the Resource of Shredders.

This book reports on advances in mechanical engineering, with a special emphasis on innovative design approaches, constructions and working processes, and on intelligent devices. It discusses physical aspects during pressing and vibrational processing, and findings relating to static stiffness and wear resistance. Further chapters report on the modeling and simulation of mechanical systems using mathematical modeling, numerical simulation, and experimental studies. This book also describes the use of LabVIEW, an infrared camera, and acoustic technology for the control and diagnostic of air leaks and radial runout of gear wheels. It discusses topics concerning the efficiency of systems and processes, reporting on new strategies for improving the design and operation of hydraulic machine rotors, screw and roller presses, and homogenizers, among others. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this second volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned.

ISBN: 9783031952180$q(electronic bk.)

Standard No.: 10.1007/978-3-031-95218-0doiSubjects--Topical Terms:

243834
Manufacturing processes

LC Class. No.: TS183

Dewey Class. No.: 670

Advances in design, simulation and manufacturing VIIIproceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal.Volume 1,mechanical engineering /
LDR:02999nmm a22003495a 4500 001 692987
003 DE-He213
005 20251229072229.0
006 m d
007 cr nn 008maaau
008 260622s2025 sz s 0 eng d
020 $a 9783031952180$q(electronic bk.)
020 $a 9783031952173$q(paper)
024 7 $a 10.1007/978-3-031-95218-0 $2 doi
035 $a 978-3-031-95218-0
040 $a GP $c GP
041 0 $a eng
050 4 $a TS183
072 7 $a TBD $2 bicssc
072 7 $a TEC016000 $2 bisacsh
072 7 $a TBD $2 thema
082 0 4 $a 670 $2 23
090 $a TS183 $b .I61 2025
111 2 $n (3rd : $d 1998 : $c Amsterdam, Netherlands) $3 194767
245 1 0 $a Advances in design, simulation and manufacturing VIII $h [electronic resource] : $b proceedings of the 8th International Conference on Design, Simulation, Manufacturing : the innovation exchange, DSMIE-2025, June 17-20, 2025, Porto, Portugal. $n Volume 1, $p mechanical engineering / $c edited by Raul D. Campilho ... [et al.].
246 3 $a DSMIE-2025
260 $a Cham : $b Springer Nature Switzerland : $b Imprint: Springer, $c 2025.
300 $a xv, 282 p. : $b ill. (some col.), digital ; $c 24 cm.
490 1 $a Lecture notes in mechanical engineering, $x 2195-4364
505 0 $a Implementation of Auxiliary Inner Tube Feeding System for Reduce Cycle Time and Stabilize the Workflow -- Investigation of the Process of Making Applesauce and Development the Device for its Implementation -- Recapitulating the Mechanical Anisotropy of the Spinal Cord via 3D Printing and Sinusoidal Scaffold Design -- Application of Catenary Curve Principles in the Design of the Low-Floor Bus Body Cross-Section -- Technological Solutions for Increasing the Resource of Shredders.
520 $a This book reports on advances in mechanical engineering, with a special emphasis on innovative design approaches, constructions and working processes, and on intelligent devices. It discusses physical aspects during pressing and vibrational processing, and findings relating to static stiffness and wear resistance. Further chapters report on the modeling and simulation of mechanical systems using mathematical modeling, numerical simulation, and experimental studies. This book also describes the use of LabVIEW, an infrared camera, and acoustic technology for the control and diagnostic of air leaks and radial runout of gear wheels. It discusses topics concerning the efficiency of systems and processes, reporting on new strategies for improving the design and operation of hydraulic machine rotors, screw and roller presses, and homogenizers, among others. Based on the 8th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2025), held on June 17-20, 2025, in Porto, Portugal, this second volume of a 4-volume set provides academics and professionals with extensive information on technologies, trends, challenges, and practice-oriented experience in all the above-mentioned.
650 0 $a Manufacturing processes $3 243834
650 0 $a Manufacturing processes $x Computer simulation $v Congresses. $3 731218
650 0 $a Engineering design $3 253511
650 1 4 $a Engineering Design. $3 273752
650 2 4 $a Applied Dynamical Systems. $3 913436
650 2 4 $a Control, Robotics, Automation. $3 914981
700 1 $a Campilho, Raul D. $3 1009365
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer Nature eBook
830 0 $a Lecture notes in mechanical engineering. $3 592095
856 4 0 $u https://doi.org/10.1007/978-3-031-95218-0
950 $a Mechanical Engineering (R0) (SpringerNature-85268)