國立高雄大學圖資館 |

Language: English

Back

Production at the leading edge of technologyproceedings of the 14th Congress of the German Academic Association for Production Technology (WGP), Chemnitz University of Technology, December 2024 /

Record Type:	Electronic resources : Monograph/item
Title/Author:	Production at the leading edge of technologyedited by Welf-Guntram Drossel, Steffen Ihlenfeldt, Martin Dix.
Reminder of title:	proceedings of the 14th Congress of the German Academic Association for Production Technology (WGP), Chemnitz University of Technology, December 2024 /
other author:	Drossel, Welf-Guntram.
corporate name:
Published:	Cham :Springer Nature Switzerland :2025.
Description:	xvii, 702 p. :ill., digital ;24 cm.
Contained By:	Springer Nature eBook
Subject:	Industrial capacityCongresses.Technological innovations
Online resource:	https://doi.org/10.1007/978-3-031-86893-1
ISBN:	9783031868931$q(electronic bk.)

Production at the leading edge of technologyproceedings of the 14th Congress of the German Academic Association for Production Technology (WGP), Chemnitz University of Technology, December 2024 /
Production at the leading edge of technologyproceedings of the 14th Congress of the German Academic Association for Production Technology (WGP), Chemnitz University of Technology, December 2024 /[electronic resource] :edited by Welf-Guntram Drossel, Steffen Ihlenfeldt, Martin Dix. - Cham :Springer Nature Switzerland :2025. - xvii, 702 p. :ill., digital ;24 cm. - Lecture notes in production engineering,2194-0533. - Lecture notes in production engineering..

Part1.Manufacturing Processes and Cutting Tools -- 1.Design of a combination tool for drilling and deburring cross holes -- 2.Influence of coating interlayer and substrate on tool wear progression when turning C45 -- 3.A Framework for Real-time Chatter Monitoring and Deep Learning-based Stability Lobe Diagram Generation -- 4.On-Machine Flank Wear Analysis in Cutting Tools Using Artificial Intelligence -- 5.Wireless determination of mechanical loads during deep hole drilling -- 6.Inverse calculation of cryogenic convective heat transfer coefficient with numerical methods -- 7.Experimental and numerical characterisation of the solubility of a CO2 lubricant mixture for a cryogenic minimum quantity lubrication system -- 8.Influence of external forces on the detectability of the resonance frequency of ultrasonic vibration systems -- 9.Simulation and Experimental Analysis of Particle Dynamics in a Water Abrasive Fine Jet Mixing Chamber -- Part13.Production Management -- 68.Transformation needs adoption: A conceptual framework to develop technology implementation strategies -- 69.Key Performance Indicators For Data-Based Project Management - Transferability of Lean Methods To The Construction Industry -- 70.Data-Driven Demonstrator for Sustainable Production Through Remanufacturing -- 71.Concept for Synchronizing Technical System Models and Organizational Structures for Model-Based Systems Engineering -- 72.Supporting the resilience of communication systems in manufacturing by providing extrinsic resilience from production system entities -- 73.The Impact of Digital Transformation on Smart Manufacturing: A Survey Analysis -- 74.Development of a Multi-Method Analysis for Make-to-Order Manufacturers -- 75.Analysis of the Implementation Process for Subscription Models regarding Enablers for Sustainability.

This book contains all contributions to the congress, in which both detailed scientific investigations and technological innovations in the process chains of machining and forming are discussed as well as comprehensive, far-sighted overall views on the planning and control of production processes. These approaches are supplemented by more interdisciplinary cross-sectional topics such as robotics, control engineering, automation, materials technology, additive manufacturing and human-centered production. It is particularly striking that the main approaches presented aim to improve efficiency in production using data-driven methods such as machine learning and artificial intelligence. However, the use of measurement results to improve simulations is also frequently addressed. The book proceedings show that transformations can only succeed through the realization of both detailed technical improvements in production technologies and optimized production organization.

ISBN: 9783031868931$q(electronic bk.)

Standard No.: 10.1007/978-3-031-86893-1doiSubjects--Topical Terms:

887135
Industrial capacity
--Technological innovations--Congresses.

LC Class. No.: T58.7 / .B44 2024

Dewey Class. No.: 658.5

Production at the leading edge of technologyproceedings of the 14th Congress of the German Academic Association for Production Technology (WGP), Chemnitz University of Technology, December 2024 /
LDR:04043nmm a22003375a 4500 001 693010
003 DE-He213
005 20251229065056.0
006 m d
007 cr nn 008maaau
008 260622s2025 sz s 0 eng d
020 $a 9783031868931$q(electronic bk.)
020 $a 9783031868924$q(paper)
024 7 $a 10.1007/978-3-031-86893-1 $2 doi
035 $a 978-3-031-86893-1
040 $a GP $c GP
041 0 $a eng
050 4 $a T58.7 $b .B44 2024
072 7 $a TGP $2 bicssc
072 7 $a TEC009060 $2 bisacsh
072 7 $a TGP $2 thema
082 0 4 $a 658.5 $2 23
090 $a T58.7 $b .G373 2024
111 2 $n (3rd : $d 1998 : $c Amsterdam, Netherlands) $3 194767
245 1 0 $a Production at the leading edge of technology $h [electronic resource] : $b proceedings of the 14th Congress of the German Academic Association for Production Technology (WGP), Chemnitz University of Technology, December 2024 / $c edited by Welf-Guntram Drossel, Steffen Ihlenfeldt, Martin Dix.
260 $a Cham : $b Springer Nature Switzerland : $b Imprint: Springer, $c 2025.
300 $a xvii, 702 p. : $b ill., digital ; $c 24 cm.
490 1 $a Lecture notes in production engineering, $x 2194-0533
505 0 $a Part1.Manufacturing Processes and Cutting Tools -- 1.Design of a combination tool for drilling and deburring cross holes -- 2.Influence of coating interlayer and substrate on tool wear progression when turning C45 -- 3.A Framework for Real-time Chatter Monitoring and Deep Learning-based Stability Lobe Diagram Generation -- 4.On-Machine Flank Wear Analysis in Cutting Tools Using Artificial Intelligence -- 5.Wireless determination of mechanical loads during deep hole drilling -- 6.Inverse calculation of cryogenic convective heat transfer coefficient with numerical methods -- 7.Experimental and numerical characterisation of the solubility of a CO2 lubricant mixture for a cryogenic minimum quantity lubrication system -- 8.Influence of external forces on the detectability of the resonance frequency of ultrasonic vibration systems -- 9.Simulation and Experimental Analysis of Particle Dynamics in a Water Abrasive Fine Jet Mixing Chamber -- Part13.Production Management -- 68.Transformation needs adoption: A conceptual framework to develop technology implementation strategies -- 69.Key Performance Indicators For Data-Based Project Management - Transferability of Lean Methods To The Construction Industry -- 70.Data-Driven Demonstrator for Sustainable Production Through Remanufacturing -- 71.Concept for Synchronizing Technical System Models and Organizational Structures for Model-Based Systems Engineering -- 72.Supporting the resilience of communication systems in manufacturing by providing extrinsic resilience from production system entities -- 73.The Impact of Digital Transformation on Smart Manufacturing: A Survey Analysis -- 74.Development of a Multi-Method Analysis for Make-to-Order Manufacturers -- 75.Analysis of the Implementation Process for Subscription Models regarding Enablers for Sustainability.
520 $a This book contains all contributions to the congress, in which both detailed scientific investigations and technological innovations in the process chains of machining and forming are discussed as well as comprehensive, far-sighted overall views on the planning and control of production processes. These approaches are supplemented by more interdisciplinary cross-sectional topics such as robotics, control engineering, automation, materials technology, additive manufacturing and human-centered production. It is particularly striking that the main approaches presented aim to improve efficiency in production using data-driven methods such as machine learning and artificial intelligence. However, the use of measurement results to improve simulations is also frequently addressed. The book proceedings show that transformations can only succeed through the realization of both detailed technical improvements in production technologies and optimized production organization.
650 0 $a Industrial capacity $x Technological innovations $v Congresses. $3 887135
650 1 4 $a Industrial and Production Engineering. $3 273753
650 2 4 $a Machines, Tools, Processes. $3 913445
650 2 4 $a Engineering Design. $3 273752
700 1 $a Drossel, Welf-Guntram. $3 1009382
700 1 $a Ihlenfeldt, Steffen. $3 967211
700 1 $a Dix, Martin. $3 1009383
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer Nature eBook
830 0 $a Lecture notes in production engineering. $3 675309
856 4 0 $u https://doi.org/10.1007/978-3-031-86893-1
950 $a Mechanical Engineering (R0) (SpringerNature-85268)