雙環型單輸出雷射二極體的製作及特性量測 = The Fabricatio...
國立高雄大學電機工程學系碩士班

 

  • 雙環型單輸出雷射二極體的製作及特性量測 = The Fabrication and Characterization of Semiconductor Ring Laser With Double Ring Cavities and Y-Junction Couplers
  • 紀錄類型: 書目-語言資料,印刷品 : 單行本
    並列題名: The Fabrication and Characterization of Semiconductor Ring Laser With Double Ring Cavities and Y-Junction Couplers
    作者: 方薪惟,
    其他團體作者: 國立高雄大學
    出版地: [高雄市]
    出版者: 撰者;
    出版年: 2013[民102]
    面頁冊數: 84面圖,表格 : 30公分;
    標題: 雙環型單輸出雷射
    標題: Circular Ring Laser
    電子資源: http://handle.ncl.edu.tw/11296/ndltd/17895135922898320092
    附註: 參考書目:面70-71
    附註: 102年10月31日公開
    摘要註: 本論文使用AlGaInP多重量子井結構磊晶來製作雙環形單輸出的半導體雷射,論文內容主要探討利用兩個環型共振腔加上一個Y-Junction的光輸出耦合器組合而成的雙環型半導體雷射的結構,將所量測到的光電輸出特性並進行其光電特性分析與研究,以及改進此半導體雷射元件的製作過程。 In this thesis a ridge waveguide ring laser with double ring cavities and Y-junction couplers had been fabricated on a MOCVD grown AlGaInP/InGaP multiple quantum well substrate. It is found that a single mode output spectrum which related to the 8 figure shape cavity formed by two circular ring cavities is dominated at threshold current density at 1.4 kA/cm2.As the injection current increased up higher until the threshold of the lasing from the solitons cavity was reached, a multi-modes output spectrum due to Fabery-Perot resonance was observed. Model based on the principle of emission rate equilibrium of the laser cavity with two ring cavities and the combination of a soliton cavity has been developed to explain the results of the output characteristics of laser devices fabricated. In addition, lasing modes from each circular ring emission was difficult to existed due to higher threshold current than the figure 8 cavity which overlapping these two ring cavities and had longer cavity length path.
館藏
  • 2 筆 • 頁數 1 •
 
310002392895 博碩士論文區(二樓) 不外借資料 學位論文 TH 008M/0019 542201 0049 2013 一般使用(Normal) 在架 0
310002392903 博碩士論文區(二樓) 不外借資料 學位論文 TH 008M/0019 542201 0049 2013 c.2 一般使用(Normal) 在架 0
  • 2 筆 • 頁數 1 •
評論
Export
取書館別
 
 
變更密碼
登入