國立高雄大學圖資館 |

Language: English

Back

Response of steel and composite beam...

Michigan State University.

Response of steel and composite beams subjected to combined shear and fire loading.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Response of steel and composite beams subjected to combined shear and fire loading.
Author:	Naser, Mohannad Zeyad.
Published:	Ann Arbor : ProQuest Dissertations & Theses, 2016
Description:	249 p.
Notes:	Source: Dissertation Abstracts International, Volume: 78-01(E), Section: B.
Notes:	Adviser: Venkatesh Kodur.
Contained By:	Dissertation Abstracts International78-01B(E).
Subject:	Civil engineering.
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10158283
ISBN:	9781369132915

Response of steel and composite beams subjected to combined shear and fire loading.
Naser, Mohannad Zeyad.

Response of steel and composite beams subjected to combined shear and fire loading. - Ann Arbor : ProQuest Dissertations & Theses, 2016 - 249 p.

Source: Dissertation Abstracts International, Volume: 78-01(E), Section: B.

Thesis (Ph.D.)--Michigan State University, 2016.

Civil infrastructures are built to last for several decades and hence, they are subjected to various types of loading during their service lives, including fire hazard. Thus, provision of fire safety measures to structural members is one of the primary considerations in the design of buildings and other civil infrastructure. Since structural members, made of steel, exhibit lower fire resistance due to high thermal conductivity and rapid degradation of strength and stiffness properties of steel, they are vulnerable to fire-induced damage or collapse. Therefore, the behavior of steel and composite beams, under fire conditions, is of critical concern from fire safety point of view.

ISBN: 9781369132915Subjects--Topical Terms:

195981
Civil engineering.

Response of steel and composite beams subjected to combined shear and fire loading.
LDR:04885nmm a2200349 4500 001 502138
005 20170619070730.5
008 170818s2016 ||||||||||||||||| ||eng d
020 $a 9781369132915
035 $a (MiAaPQ)AAI10158283
035 $a AAI10158283
040 $a MiAaPQ $c MiAaPQ
100 1 $a Naser, Mohannad Zeyad. $3 766175
245 1 0 $a Response of steel and composite beams subjected to combined shear and fire loading.
260 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2016
300 $a 249 p.
500 $a Source: Dissertation Abstracts International, Volume: 78-01(E), Section: B.
500 $a Adviser: Venkatesh Kodur.
502 $a Thesis (Ph.D.)--Michigan State University, 2016.
520 $a Civil infrastructures are built to last for several decades and hence, they are subjected to various types of loading during their service lives, including fire hazard. Thus, provision of fire safety measures to structural members is one of the primary considerations in the design of buildings and other civil infrastructure. Since structural members, made of steel, exhibit lower fire resistance due to high thermal conductivity and rapid degradation of strength and stiffness properties of steel, they are vulnerable to fire-induced damage or collapse. Therefore, the behavior of steel and composite beams, under fire conditions, is of critical concern from fire safety point of view.
520 $a In contrast to current design philosophy at room temperature, where steel and composite beams are to be designed for flexural limit state and then checked for shear resistance, fire design of such beams is carried out based on flexural limit state only, without any consideration to shear limit state. This design philosophy for fire resistance evaluation may not be conservative or realistic under certain scenarios where shear forces are dominant or shear capacity degrades at a rapid pace under fire. Further, there is limited data and understanding in literature on the mechanism of shear failure in steel and composite beams under combined effects of shear and fire loading.
520 $a To overcome some of the limitations in current design philosophy with respect to shear limit state, a research program involving experimental and numerical studies on the fire response of steel and composite beams/girders is undertaken. Four composite beams were tested under simultaneous loading and fire exposure to study their flexural and shear behavior. Each of these composite beams is made of uninsulated standard hot-rolled steel section, compositely attached to a concrete slab through shear studs. The main test variables included; level of composite action, type, and magnitude of loading. Results from fire tests indicate that composite beams can experience failure under standard fire conditions in about 30-50 minutes and their response is highly influenced by type of loading and development of sectional instability.
520 $a As part of numerical studies, a finite element model was developed in ANSYS for tracing thermal and structural response of composite beams under combined effects of structural loading and fire conditions. The developed model specifically accounts for geometric and material nonlinearities, temperature-dependent material properties, shear effect, sectional and global instability, composite action, and various failure limit states. This model was calibrated utilizing test data generated from fire experiments. The validated model was applied to carry out detailed parametric studies to quantify critical factors influencing response of steel and composite beams under dominant shear and fire loading. The variables included: sectional instability; web slenderness; load level; shear effects; fire severity; loading configuration (type); level of composite action; shear stud stiffness; and thickness of concrete slab.
520 $a Results from experimental and parametric studies are utilized to derive an approach for evaluating degrading shear capacity in fire-exposed steel and composite beams. This methodology accounts for temperature-induced property degradation in constituent materials, as well as sectional instability and level of composite action offered by concrete slab in evaluating shear capacity in beams. This methodology is combined with flexural capacity calculations, available in literature, to propose a unified approach for design (and analysis) of fire-exposed steel and composite beams. The proposed unified approach can be applied to fire design of steel and composite beams or girders subjected to wide ranging scenarios including dominant shear and fire loading.
590 $a School code: 0128.
650 4 $a Civil engineering. $3 195981
650 4 $a Mechanics. $3 200022
650 4 $a Design. $3 204000
690 $a 0543
690 $a 0346
690 $a 0389
710 2 $a Michigan State University. $b Civil Engineering - Doctor of Philosophy. $3 766176
773 0 $t Dissertation Abstracts International $g 78-01B(E).
790 $a 0128
791 $a Ph.D.
792 $a 2016
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10158283