國立高雄大學圖資館 |

Language: English

Back

Laser Machining and Near Field Micro...

Ross, Anthony J., III.

Laser Machining and Near Field Microwave Microscopy of Silver Inks for 3D Printable RF Devices.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Laser Machining and Near Field Microwave Microscopy of Silver Inks for 3D Printable RF Devices.
Author:	Ross, Anthony J., III.
Published:	Ann Arbor : ProQuest Dissertations & Theses, 2017
Description:	51 p.
Notes:	Source: Masters Abstracts International, Volume: 56-05.
Notes:	Adviser: Thomas Weller.
Contained By:	Masters Abstracts International56-05(E).
Subject:	Electrical engineering.
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10603228
ISBN:	9780355103977

Laser Machining and Near Field Microwave Microscopy of Silver Inks for 3D Printable RF Devices.
Ross, Anthony J., III.

Laser Machining and Near Field Microwave Microscopy of Silver Inks for 3D Printable RF Devices. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 51 p.

Source: Masters Abstracts International, Volume: 56-05.

Thesis (M.S.E.E.)--University of South Florida, 2017.

3D printable materials for RF devices need improvement in order to satisfy the demand for higher frequency and lower loss performance. Characterization of materials that have shown improvements of conductor conductivity have been performed. By using a laser machining technique the loss of a 3D printed 2.45 GHz microstrip Square Open Loop Resonator (SOLR) bandpass filter has been shown to improve by 2.1dB, along with an increase in bandwidth from 10% to 12.7% when compared to a SOLR filter that has not been laser machined. Both laser machined and microwaved silver inks have been mapped for conductivity using a Near Field Microwave Microscope (NFMM) and have shown improvement of conductivity compared to inks that have been cured using standard methods.

ISBN: 9780355103977Subjects--Topical Terms:

454503
Electrical engineering.

Laser Machining and Near Field Microwave Microscopy of Silver Inks for 3D Printable RF Devices.
LDR:01705nmm a2200301 4500 001 523925
005 20180517120324.5
008 180709s2017 ||||||||||||||||| ||eng d
020 $a 9780355103977
035 $a (MiAaPQ)AAI10603228
035 $a (MiAaPQ)usf:14234
035 $a AAI10603228
040 $a MiAaPQ $c MiAaPQ
100 1 $a Ross, Anthony J., III. $3 795407
245 1 0 $a Laser Machining and Near Field Microwave Microscopy of Silver Inks for 3D Printable RF Devices.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 51 p.
500 $a Source: Masters Abstracts International, Volume: 56-05.
500 $a Adviser: Thomas Weller.
502 $a Thesis (M.S.E.E.)--University of South Florida, 2017.
520 $a 3D printable materials for RF devices need improvement in order to satisfy the demand for higher frequency and lower loss performance. Characterization of materials that have shown improvements of conductor conductivity have been performed. By using a laser machining technique the loss of a 3D printed 2.45 GHz microstrip Square Open Loop Resonator (SOLR) bandpass filter has been shown to improve by 2.1dB, along with an increase in bandwidth from 10% to 12.7% when compared to a SOLR filter that has not been laser machined. Both laser machined and microwaved silver inks have been mapped for conductivity using a Near Field Microwave Microscope (NFMM) and have shown improvement of conductivity compared to inks that have been cured using standard methods.
590 $a School code: 0206.
650 4 $a Electrical engineering. $3 454503
650 4 $a Engineering. $3 210888
690 $a 0544
690 $a 0537
710 2 $a University of South Florida. $b Electrical Engineering. $3 708812
773 0 $t Masters Abstracts International $g 56-05(E).
790 $a 0206
791 $a M.S.E.E.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10603228