國立高雄大學圖資館 |

登入

回首頁

Rotorcraft certification by simulation and analysisan introduction to the principles and practices /

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Rotorcraft certification by simulation and analysisby Gareth D. Padfield ... [et al.].
其他題名:	an introduction to the principles and practices /
其他作者:	Padfield, Gareth D.
出版者:	Cham :Springer Nature Switzerland :2025.
面頁冊數:	xxx, 231 p. :ill., digital ;24 cm.
Contained By:	Springer Nature eBook
標題:	Aerospace engineering.
電子資源:	https://doi.org/10.1007/978-3-031-86398-1
ISBN:	9783031863981$q(electronic bk.)

Rotorcraft certification by simulation and analysisan introduction to the principles and practices /
Rotorcraft certification by simulation and analysisan introduction to the principles and practices /[electronic resource] :by Gareth D. Padfield ... [et al.]. - Cham :Springer Nature Switzerland :2025. - xxx, 231 p. :ill., digital ;24 cm. - Springer aerospace technology,1869-1749. - Springer aerospace technology..

1. Introduction -- 2. Structure of the RCbS Process -- 3. Developing the RCbS Project Management Plan (Phase 0) -- 4. Requirements Capture and Build (Phase 1) -- 5. Rotorcraft Flight Modelling and Simulation -- 6. Flight Simulation Model Development (Phase 2a) -- 7. Flight Simulator Development (Phase 2b) -- 8. Flight Test Measurements for FSM/FS Development (Phase 2c) -- 9. Credibility Assessment and Certification Activity (Phase 3) -- 10. Resourcing the RCbS Process -- 11. Guidance for Selected ACRs within the Certification Specifications -- 12. Case Study 1: CS-27/29 Low Speed Controllability and Manoeuvrability -- 13. Case Study 2: CS 29/27 Category A Confined Area Rejected Take-off -- 14. Case Study 3 -- 15. Finale and Potential Routes to the Adoption of RCbS.

Open Access

This open access book presents the steps necessary for the application of rotorcraft flight modelling and simulation and analysis in support of certification for compliance with EASA CS-27 and CS-29, SUBPART B-FLIGHT and other flight-related rules (e.g. CS-27/9, Appendix B, Airworthiness Criteria for Helicopter Instrument Flight). The material is presented in the form of a structured 'Rotorcraft Certification by Simulation' process, starting from the relevant paragraphs in the Certification Specifications, through a comprehensive description of the assembly of flight simulation requirements, informed by judgements on Influence, Predictability and Credibility, and on into the detailed building of the three major elements of the process; the Flight Simulation Model, the Flight Simulator, and the associated Flight Test Measurement System. The latter feeds both the flight model and simulator development with real-world test data to support validation and fidelity assessment. The book is intended to provide support to early adopters of simulation and analysis in the certification process, including those who have considerable experience and expertise in the use of Modelling and Simulation in support of design and development. It is acknowledged that there exists much good practice in the rotorcraft industry in this regard. However, what is presented herein is considered a significant step forward in the development of this practice, particularly in terms of the importance of a structured, requirements-based, process using adaptable-fidelity, descriptive and predictive simulation tools, and associated pre-certification flight testing, to reach the goal of a credible flight simulation.

ISBN: 9783031863981$q(electronic bk.)

Standard No.: 10.1007/978-3-031-86398-1doiSubjects--Topical Terms:

324294
Aerospace engineering.

LC Class. No.: TL545

Dewey Class. No.: 629.1

Rotorcraft certification by simulation and analysisan introduction to the principles and practices /
LDR:03660nmm a22003735a 4500 001 692946
003 DE-He213
005 20250806171724.0
006 m d
007 cr nn 008maaau
008 260622s2025 sz s 0 eng d
020 $a 9783031863981$q(electronic bk.)
020 $a 9783031863974$q(paper)
024 7 $a 10.1007/978-3-031-86398-1 $2 doi
035 $a 978-3-031-86398-1
040 $a GP $c GP
041 0 $a eng
050 4 $a TL545
072 7 $a TRP $2 bicssc
072 7 $a TTDS $2 bicssc
072 7 $a TEC002000 $2 bisacsh
072 7 $a TRP $2 thema
072 7 $a TTDS $2 thema
082 0 4 $a 629.1 $2 23
090 $a TL545 $b .R848 2025
245 0 0 $a Rotorcraft certification by simulation and analysis $h [electronic resource] : $b an introduction to the principles and practices / $c by Gareth D. Padfield ... [et al.].
260 $a Cham : $b Springer Nature Switzerland : $b Imprint: Springer, $c 2025.
300 $a xxx, 231 p. : $b ill., digital ; $c 24 cm.
490 1 $a Springer aerospace technology, $x 1869-1749
505 0 $a 1. Introduction -- 2. Structure of the RCbS Process -- 3. Developing the RCbS Project Management Plan (Phase 0) -- 4. Requirements Capture and Build (Phase 1) -- 5. Rotorcraft Flight Modelling and Simulation -- 6. Flight Simulation Model Development (Phase 2a) -- 7. Flight Simulator Development (Phase 2b) -- 8. Flight Test Measurements for FSM/FS Development (Phase 2c) -- 9. Credibility Assessment and Certification Activity (Phase 3) -- 10. Resourcing the RCbS Process -- 11. Guidance for Selected ACRs within the Certification Specifications -- 12. Case Study 1: CS-27/29 Low Speed Controllability and Manoeuvrability -- 13. Case Study 2: CS 29/27 Category A Confined Area Rejected Take-off -- 14. Case Study 3 -- 15. Finale and Potential Routes to the Adoption of RCbS.
506 0 $a Open Access
520 $a This open access book presents the steps necessary for the application of rotorcraft flight modelling and simulation and analysis in support of certification for compliance with EASA CS-27 and CS-29, SUBPART B-FLIGHT and other flight-related rules (e.g. CS-27/9, Appendix B, Airworthiness Criteria for Helicopter Instrument Flight). The material is presented in the form of a structured 'Rotorcraft Certification by Simulation' process, starting from the relevant paragraphs in the Certification Specifications, through a comprehensive description of the assembly of flight simulation requirements, informed by judgements on Influence, Predictability and Credibility, and on into the detailed building of the three major elements of the process; the Flight Simulation Model, the Flight Simulator, and the associated Flight Test Measurement System. The latter feeds both the flight model and simulator development with real-world test data to support validation and fidelity assessment. The book is intended to provide support to early adopters of simulation and analysis in the certification process, including those who have considerable experience and expertise in the use of Modelling and Simulation in support of design and development. It is acknowledged that there exists much good practice in the rotorcraft industry in this regard. However, what is presented herein is considered a significant step forward in the development of this practice, particularly in terms of the importance of a structured, requirements-based, process using adaptable-fidelity, descriptive and predictive simulation tools, and associated pre-certification flight testing, to reach the goal of a credible flight simulation.
650 0 $a Aerospace engineering. $3 324294
650 0 $a Astronautics. $3 274036
650 0 $a Fluid mechanics. $3 189003
650 0 $a Outer space $x Exploration. $3 275587
650 1 4 $a Aerospace Technology and Astronautics. $3 309707
650 2 4 $a Engineering Fluid Dynamics. $3 273893
650 2 4 $a Space Exploration and Astronautics. $3 274038
700 1 $a Padfield, Gareth D. $3 1009336
710 2 $a SpringerLink (Online service) $3 273601
773 0 $t Springer Nature eBook
830 0 $a Springer aerospace technology. $3 558627
856 4 0 $u https://doi.org/10.1007/978-3-031-86398-1
950 $a Mechanical Engineering (R0) (SpringerNature-85268)