Engineering design

Modeling and Simulation for RF System Design / by: (Electronic resources)

Wireless Networks :Multiuser Detection in Cross-Layer Design / by: (Electronic resources)

Transient Analysis of Electric Power Circuits Handbook / by: (Electronic resources)

Introduction to Advanced System-on-Chip Test Design and Optimization by: (Electronic resources)

Model and Design of Bipolar and MOS Current-Mode Logic :CML, ECL and SCL Digital Circuits / by: (Electronic resources)

Product Engineering :Eco-Design, Technologies and Green Energy / by: (Electronic resources)

New Algorithms, Architectures and Applications for Reconfigurable Computing / by: (Electronic resources)

Systematic Modeling and Analysis of Telecom Frontends and Their Building Blocks / by: (Electronic resources)

Wideband Low Noise Amplifiers Exploiting Thermal Noise Cancellation / by: (Electronic resources)

LAN-ESD Co-Design for Fully Integrated CMOS Wireless Receivers / by: (Electronic resources)

Advances in Computational Multibody Systems / by: (Electronic resources)

Advances in Integrated Design and Manufacturing in Mechanical Engineering / by: (Electronic resources)

Product Lifecycle Management :21st Century Paradigm for Product Realisation / by: (Electronic resources)

System-level Test and Validation of Hardware/Software Systems / by: (Electronic resources)

Design Performance / by: (Electronic resources)

PID Control :New Identification and Design Methods / by: (Electronic resources)

Ship Motion Control :Course Keeping and Roll Stabilisation Using Rudder and Fins / by: (Electronic resources)

Control Systems Design :A New Framework / by: (Electronic resources)

Maintenance Theory of Reliability / by: (Electronic resources)

Innovation Cell :Agile Teams to Master Disruptive Innovation / by: (Electronic resources)

Grippers in Motion :The Fascination of Automated Handling Tasks / by: (Electronic resources)

Adobe Acrobat and PDF for Architecture, Engineering, and Construction / by: (Electronic resources)

Mathematical Modelling for Sustainable Development / by: (Electronic resources)

Rapid Prototyping :Theory and Practice / by: (Electronic resources)

Analog Design Essentials / by: (Electronic resources)

Design of Very High-Frequency Multirate Switched-Capacitor Circuits :Extending the Boundaries of CMOS Analog Front-End Filtering / by: (Electronic resources)

FPGA Implementations of Neural Networks / by: (Electronic resources)

High-Speed Photodiodes in Standard CMOS Technology / by: (Electronic resources)

Rapid Prototyping of Digital Systems / by: (Electronic resources)

Product Platform and Product Family Design :Methods and Applications / by: (Electronic resources)

Advances in ElectronicTesting / by: (Electronic resources)

Thermal and Power Management of Integrated Circuits / by: (Electronic resources)

Fundamentals of Switching Theory and Logic Design :A Hands on Approach / by: (Electronic resources)

Wide-Bandwidth High-Dynamic Range D/A Converters / by: (Electronic resources)

Digital timing measurements :From scopes and probes to timing and jitter / by: (Electronic resources)

Effective Functional VerificationPrinciples and Processes / by: (Electronic resources)

Analog Circuit Design :RF Circuits: Wide band, Front-Ends, DAC's, Design Methodology and Verification for RF and Mixed-Signal Systems, Low Power and Low Voltage / by: (Electronic resources)

Parallel Robots / by: (Electronic resources)

Low-Power Low-Voltage Sigma-Delta Modulators in Nanometer CMOS / by: (Electronic resources)

Applied High-Speed Plate Penetration Dynamics / by: (Electronic resources)

Calibration techniques in nyquist A/D converters / by: (Electronic resources)

Advanced design techniques for RF power amplifiers / by: (Electronic resources)

[Sigma delta] A/D CONVERSION FOR SIGNAL CONDITIONING / by: (Electronic resources)

Assembly Line Design :The Balancing of Mixed-Model Hybrid Assembly Lines with Genetic Algorithms / by: (Electronic resources)

Advances in Design / by: (Electronic resources)

Measurement, Control, and Communication Using IEEE 1588 / by: (Electronic resources)

Decision-Making in Engineering Design :Theory and Practice / by: (Electronic resources)

Make and Test Projects in Engineering Design :Creativity, Engagement and Learning / by: (Electronic resources)

Designerly Ways of Knowing / by: (Electronic resources)

Designing Accessible Technology / by: (Electronic resources)

Control Design Techniques in Power Electronics Devices / by: (Electronic resources)

Leonardo's Lost Robots / by: (Electronic resources)

Pulsed Power Systems :Principles and Applications / by: (Electronic resources)

BioMEMS / by: (Electronic resources)

Fully-Depleted SOI CMOS Circuits and Technology :for Ultralow-Power Applications / by: (Electronic resources)

Fault-Tolerance Techniques for SRAM-based FPGAs / by: (Electronic resources)

Adaptive Techniques for Mixed Signal System on Chip / by: (Electronic resources)

Advances in Robot Kinematics :Mechanisms and Motion / by: (Electronic resources)

Applications of Specification and Design Languages for SoCs :Selected papers from FDL 2005 / by: (Electronic resources)

No More Muddling Through :Mastering Complex Projects in Engineering and Management / by: (Electronic resources)

Innovations in Design & Decision Support Systems in Architecture and Urban Planning / by: (Electronic resources)

Inventive Thinking through TRIZ :A Practical Guide / by: (Electronic resources)

Engineering design / by: (Language materials, printed)

Global Design to Gain a Competitive EdgeAn Holistic and Collaborative Design Approach based on Computational Tools / by: (Electronic resources)

Advanced Design and Manufacture to Gain a Competitive EdgeNew Manufacturing Techniques and their Role in Improving Enterprise Performance / by: (Electronic resources)

Fundamentals of Switching Theory and Logic DesignA Hands on Approach / by: (Electronic resources)

Instrumentation for a better tomorrowproceedings of a symposium in honor of Arnold Beckman / by: (Electronic resources)

Design processeswhat architects & industrial designers can teach each other about managing the design process / by: (Electronic resources)

Smart designfirst International Conference Proceedings / by: (Electronic resources)

Plastic product material and process selection handbook by: (Electronic resources)

Innovative design, analysis and development practices in aerospace and automotive engineeringI-DAD 2014, February 22 - 24, 2014 / by: (Electronic resources)

Mechanical design engineering handbook by: (Electronic resources)

Design and modeling of mechanical systems - IIproceedings of the sixth Conference on Design and Modeling of Mechanical Systems, CMSM'2015, March 23-25, Hammamet, Tunisia / by: (Electronic resources)

Sustainability in engineering design by: (Electronic resources)

Advances on mechanics, design engineering and manufacturingproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), 14-16 September, 2016, Catania, Italy / by: (Electronic resources)

Innovative design and development practices in aerospace and automotive engineeringI-DAD, February 22 - 24, 2016 / by: (Electronic resources)

Research into design for communities.proceedings of ICoRD 2017 /Volume 1 by: (Electronic resources)

Research into design for communities.proceedings of ICoRD 2017 /Volume 2 by: (Electronic resources)

Advances in affective and pleasurable designproceedings of the AHFE 2017 International Conference on Affective and Pleasurable Design, July 17-21, 2017, The Westin Bonaventure Hotel, Los Angeles, California, USA / by: (Electronic resources)

Design and modeling of mechanical systems--IIIproceedings of the 7th Conference on Design and Modeling of Mechanical Systems, CMSM'2017, March 27-29, Hammamet, Tunisia / by: (Electronic resources)

Proceedings of the 7th International Conference on Kansei Engineering and Emotion Research 2018KEER 2018, 19-22 March 2018, Kuching, Sarawak, Malaysia / by: (Electronic resources)

Design, manufacturing and mechatronicsproceedings of the International Conference on Design, Manufacturing and Mechatronics (ICDMM2016) : Wuhan, China, 13-15 May 2016 / by: (Electronic resources)

Case studies in advanced engineering designproceedings of the 1st International Symposium / by: (Electronic resources)

Graphic imprintsthe influence of representation and ideation tools in architecture / by: (Electronic resources)

Advances in design, simulation and manufacturingproceedings of the International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2018, June 12-15, 2018, Sumy, Ukraine / by: (Electronic resources)

Latest thoughts on ground improvement techniquesproceedings of the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 : the Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (Electronic resources)

Dynamic Soil-Structure Interaction for Sustainable Infrastructuresproceedings of the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 : the Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (Electronic resources)

Innovative design, analysis and development practices in aerospace and automotive engineering (I-DAD 2018).Volume 1 by: (Electronic resources)

Advances in engineering designselect proceedings of FLAME 2018 / by: (Electronic resources)

Advances on mechanics, design engineering and manufacturing IIproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2018) / by: (Electronic resources)

Advances in human factors and systems interactionproceedings of the AHFE 2017 International Conference on Human Factors and Systems Interaction, July 17-21, 2017, The Westin Bonaventure Hotel, Los Angeles, California, USA / by: (Electronic resources)

Advances in design engineeringproceedings of the XXIX International Congress INGEGRAF, 20-21 June 2019, Logrono, Spain / by: (Electronic resources)

Complex systems design & managementproceedings of the Tenth International Conference on Complex Systems Design & Management, CSD&M Paris 2019 / by: (Electronic resources)

Advances in engineering design and simulationselect proceedings of NIRC 2018 / by: (Electronic resources)

Advances in design, simulation and manufacturing IIproceedings of the 2nd International Conference on Design, Simulation, Manufacturing : the Innovation Exchange, DSMIE-2019, June 11-14, 2019, Lutsk, Ukraine / by: (Electronic resources)

Advances in human factors in communication of designproceedings of the AHFE 2019 International Conference on Human Factors in Communication of Design, July 24-28, 2019, Washington D.C., USA / by: (Electronic resources)

Proceedings of ICDMC 2019design, materials, cryogenics, and constructions / by: (Electronic resources)

Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 2,Mechanical and chemical engineering / by: (Electronic resources)

Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (Electronic resources)

Advances in creativity, innovation, entrepreneurship and communication of designproceedings of the AHFE 2020 Virtual Conferences on Creativity, Innovation and Entrepreneurship, and Human Factors in Communication of Design, July 16-20, 2020, USA / by: (Electronic resources)

Advances in multidisciplinary analysis and optimizationproceedings of the 2nd National Conference on Multidisciplinary Analysis and Optimization / by: (Electronic resources)

Proceedings of the 8th International Conference on Kansei Engineering and Emotion ResearchKEER 2020, 7-9 September 2020, Tokyo, Japan / by: (Electronic resources)

Handbook of engineering practice of materials and corrosion by: (Electronic resources)

Proceedings of IDEAS 2019the Interdisciplinary Conference on Innovation, Design, Entrepreneurship, And Sustainable Systems / by: (Electronic resources)

Advances in mechanical processing and designselect proceedings of ICAMPD 2019 / by: (Electronic resources)

Advances in integrated design and productionproceedings of the 11th International Conference on Integrated Design and Production, CPI 2019, October 14-16, 2019, Fez, Morocco / by: (Electronic resources)

The future of transdisciplinary designproceedings of the Workshop on "The Future of Transdisciplinary Design", University of Luxembourg 2013 / by: (Electronic resources)

Complex systems design & managementproceedings of the 4th International Conference on Complex Systems Design & Management Asia and of the 12th Conference on Complex Systems Design & Management CSD&M 2021 / by: (Electronic resources)

Advances on mechanics, design engineering and manufacturing IIIproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2020, June 2-4, 2020 / by: (Electronic resources)

Design for tomorrow.proceedings of ICoRD 2021 /Volume 1 by: (Electronic resources)

Design for tomorrow.proceedings of ICoRD 2021 /Volume 2 by: (Electronic resources)

Design for tomorrowproceedings of ICoRD 2021.Volume 3 / by: (Electronic resources)

Advances in design, simulation and manufacturing IVproceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (Electronic resources)

Advances in design, simulation and manufacturing IVproceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.Volume 2,Mechanical and chemical engineering / by: (Electronic resources)

Advances in engineering designselect proceedings of FLAME 2020 / by: (Electronic resources)

Advances in engineering designselect prroceedings of ICOIED 2020 / by: (Electronic resources)

Recent trends in engineering designselect proceedings of ICAST 2020 / by: (Electronic resources)

Advances in creativity, innovation, entrepreneurship and communication of designproceedings of the AHFE 2021 Virtual Conferences on Creativity, Innovation and Entrepreneurship, and Human Factors in Communication of Design, July 25-29, 2021, USA / by: (Electronic resources)

Advances in design engineering IIproceedings of the XXX International Congress INGEGRAF, 24-25 June, 2021, Valencia, Spain / by: (Electronic resources)

Developments in design research and practicebest papers from 10th Senses and Sensibility 2019: lost in (G)localization / by: (Electronic resources)

Advances in design, simulation and manufacturing Vproceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland.Volume 1,Manufacturing and materials engineering / by: (Electronic resources)

Design in maritime engineeringcontributions from the ICMAT 2021 / by: (Electronic resources)

Advances in design, simulation and manufacturing VI.proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6-9, 2023, High Tatras, Slovak Republic /Volume 1,Manufacturing engineering by: (Electronic resources)

Advances in design, simulation and manufacturing VI.proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6-9, 2023, High Tatras, Slovak Republic /Volume 2,Mechanical and materials engineering by: (Electronic resources)

Recent trends in mechanical engineeringselect proceedings of PRIME 2021 / by: (Electronic resources)

Advances in design engineering IIIproceedings of the XXXI INGEGRAF International Conference 29-30 June, 1 July 2022, Malaga, Spain / by: (Electronic resources)

Advances in integrated design and production IIproceedings of the 12th International Conference on Integrated Design and Production, CPI 2022, May 10-12, 2022, ENSAM, Rabat, Morocco / by: (Electronic resources)

Advances in multidisciplinary analysis and optimizationproceedings of the 4th National Conference on Multidisciplinary Analysis and Optimization / by: (Electronic resources)

Advances on mechanics, design engineering and manufacturing IVproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2022, June 1-3, 2022, Ischia, Italy / by: (Electronic resources)

Advances in automation, mechanical and design engineeringSAMDE 2021 / by: (Electronic resources)

Advances in engineering designselect proceedings of FLAME 2022 / by: (Electronic resources)

Design in the era of Industry 4.0.proceedings of ICoRD 2023 /Volume 2 by: (Electronic resources)

Design in the era of Industry 4.0.proceedings of ICoRD 2023 /Volume 1 by: (Electronic resources)

Design in the era of Industry 4.0.proceedings of ICoRD 2023 /Volume 2 by: (Electronic resources)

Proceedings of the Munich Symposium on Lightweight Design 2022Tagungsband zum Munchner Leichtbauseminar 2022 / by: (Electronic resources)

Complex systems design & managementproceedings of the 14th International Conference on Complex Systems Design and Management CSD&M 2023 / by: (Electronic resources)

Advances in automation, mechanical and design engineeringSAMDE 2022 / by: (Electronic resources)

Advances in design, simulation and manufacturing VIIproceedings of the 7th International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2024, June 4-7, 2024, Pilsen, Czech Republic.Volume 1,Manufacturing engineering / by: (Electronic resources)

Advances in automation, mechanical and design engineeringSAMDE 2023 / by: (Electronic resources)

Proceedings of the 15th International Conference on Axiomatic Design 2023 by: (Electronic resources)

Advances in design engineering IVproceedings of the XXXII INGEGRAF International Conference 21-23 June, Cadiz, Spain / by: (Electronic resources)

Advances in design, simulation and manufacturing VIIproceedings of the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2024, June 4-7, 2024, Pilsen, Czech Republic.Volume 2,Mechanical and materials engineering / by: (Electronic resources)

Proceedings of the Munich Symposium on Lightweight Design 2023 by: (Electronic resources)

Kansei engineering and emotion research10th International Conference, KEER 2024, Taichung, Taiwan, November 20-23, 2024 : proceedings.Part I / by: (Electronic resources)

Kansei engineering and emotion research10th International Conference, KEER 2024, Taichung, Taiwan, November 20-23, 2024 : proceedings.Part II / by: (Electronic resources)

Advances in multidisciplinary design, analysis and optimizationproceedings of the 6th National Conference on Advances in Multidisciplinary Design, Analysis and Optimization 2023 / by: (Electronic resources)

Advances in artificial intelligence and electronic design technologies by: (Electronic resources)