Materials Engineering.

Advances in structural engineering.Volume twoDynamics. by: (書目-電子資源)

A primer on the geometry of carbon nanotubes and their modifications by: (書目-電子資源)

Insight into designing biocompatible magnesium alloys and compositesprocessing, mechanical and corrosion characteristics / by: (書目-電子資源)

Modeling approaches to natural convection in porous media by: (書目-電子資源)

Transparent ceramics by: (書目-電子資源)

Electro-chemo-mechanics of anodic porous alumina nano-honeycombsself-ordered growth and actuation / by: (書目-電子資源)

Eco-friendly polymer nanocompositesprocessing and properties / by: (書目-電子資源)

From creep damage mechanics to homogenization methodsa Liber Amicorum to celebrate the birthday of Nobutada Ohno / by: (書目-電子資源)

Furniture design by: (書目-電子資源)

Nanoporous aluminafabrication, structure, properties and applications / by: (書目-電子資源)

Electrochemically engineered nanoporous materialsmethods, properties and applications / by: (書目-電子資源)

Eco-friendly polymer nanocompositeschemistry and applications / by: (書目-電子資源)

Temperature measurement during millisecond annealingripple pyrometry for flash lamp annealers / by: (書目-電子資源)

Defects and impurities in silicon materialsan introduction to atomic-level silicon engineering / by: (書目-電子資源)

Design and analysis of reinforced fiber composites by: (書目-電子資源)

Fluid flow and heat transfer in rotating porous media by: (書目-電子資源)

Materials for energy infrastructure by: (書目-電子資源)

Textile materials for lightweight constructionstechnologies - methods - materials - properties / by: (書目-電子資源)

Nanomaterials in extreme environmentsfundamentals and applications / by: (書目-電子資源)

Active terahertz metamaterial for biomedical applications by: (書目-電子資源)

Mechanics of composite and multifunctional materials.Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /Volume 7 by: (書目-電子資源)

Smart Intelligent Aircraft Structures (SARISTU)proceedings of the Final Project Conference / by: (書目-電子資源)

Challenges in mechanics of time dependent materials.Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /Volume 2 by: (書目-電子資源)

Advancement of optical methods in experimental mechanics.Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /Volume 3 by: (書目-電子資源)

Proceedings of the III Advanced Ceramics and Applications Conference by: (書目-電子資源)

The automated design of materials far from equilibrium by: (書目-電子資源)

Information science for materials discovery and design by: (書目-電子資源)

Solid oxide fuel cell componentsinterfacial compatibility of SOFC glass seals / by: (書目-電子資源)

Mechanothermodynamics by: (書目-電子資源)

Silica aerogel compositesnovel fabrication methods / by: (書目-電子資源)

Nano and biotech based materials for energy building efficiency by: (書目-電子資源)

Biomaterials and medical devicesa perspective from an emerging country / by: (書目-電子資源)

Electromagnetic ultrasonic guided waves by: (書目-電子資源)

Handbook of bioceramics and biocomposites by: (書目-電子資源)

Peptide-mediated biomineralization by: (書目-電子資源)

Corrosion control and surface finishingenvironmentally friendly approaches / by: (書目-電子資源)

Power systems grounding by: (書目-電子資源)

Generalized continua as models for classical and advanced materials by: (書目-電子資源)

Microstructure-property correlations for hard, superhard, and ultrahard materials by: (書目-電子資源)

Nanoclay reinforced polymer compositesnatural fibre/nanoclay hybrid composites / by: (書目-電子資源)

Surface modifications and growth of titanium dioxide for photo-electrochemical water splitting by: (書目-電子資源)

Carbon nanoparticles and nanostructures by: (書目-電子資源)

Particulate compositesfundamentals and applications / by: (書目-電子資源)

Advances in nanocompositesmodeling, characterization and applications / by: (書目-電子資源)

Neural engineeringfrom advanced biomaterials to 3D fabrication techniques / by: (書目-電子資源)

Self-healing materials by: (書目-電子資源)

Electromechanically active polymersa concise reference / by: (書目-電子資源)

Refractive indices of solids by: (書目-電子資源)

Nanoclay reinforced polymer compositesnanocomposites and bionanocomposites / by: (書目-電子資源)

Physics and mechanics of primary well cementing by: (書目-電子資源)

Electrochemistry and corrosion science by: (書目-電子資源)

Handbook of maleic anhydride based materialssyntheses, properties and applications / by: (書目-電子資源)

Phosphors, up conversion nano particles, quantum dots and their applications.Volume 2 by: (書目-電子資源)

Rare metal technology 2016proceedings of a symposium sponsored by the Hydrometallurgy and Electrometallurgy Commitee and the Extraction & Processing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Rewas 2016towards materials resource sustainability : proceedings of a symposium sponsored by the Recycling and Environmental Technologies Committee, the Materials and Society Committee, the Extraction & Processing Division, and the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016)sponsored by the Advanced Characterization, Testing, and Simulation Committee of the Structural Materials Division of the Minerals, Metals & Materials Society (TMS), held July 17-21, 2016 Omni William Penn Hotel, Pittsburgh, Pennsylvania, USA / by: (書目-電子資源)

7th International Symposium on High-Temperature Metallurgical Processingproceedings of a symposium sponsored by the Pyrometallurgy Committee of the Extraction and Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016 145th Annual Meeting & Exhibition, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Friction stir welding and processing VIIproceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) ; held during the TMS 2013 Annual Meeting & Exhibition San Antonio, Texas USA March 3-7, 2013 / by: (書目-電子資源)

EPD Congress 2016proceedings of symposia sponsored by the Extraction & Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Magnesium technology 2016proceeding of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Advances in the science and engineering of casting solidificationan MPMD Symposium Honoring Doru Michael Stefanescu : proceedings of a symposium sponsored by the Materials Processing & Manufacturing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Florida, USA / by: (書目-電子資源)

3D MSproceedings of the 2nd International Congress on 3D Materials Science : held by June 29-July 2, 2014, L'Imperial Palace, Annecy, France / by: (書目-電子資源)

TMS 2015144th Annual Meeting & Exhibition : supplemental proceedings / by: (書目-電子資源)

Shape casting5th International Symposium 2014 : by: (書目-電子資源)

Light metals 2014proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2014 Annual Meeting & Exhibition, February 16-20, 2014, San Diego, California, USA / by: (書目-電子資源)

Ni-Co 2013proceedings of symposium sponsored by the TMS Extraction & Processing Division, TMS High Temperature Alloys Committee, and the Metallurgy and Materials Society of the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) : held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (書目-電子資源)

Magnesium technology 2013proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (書目-電子資源)

Light metals 2011proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA, February 27-March 3, 2011 / by: (書目-電子資源)

The production and processing of inorganic materials by: (書目-電子資源)

Shape casting6th International Symposium : proceedings of a symposium sponsored by the Aluminum Committee of the Light Metals Division and the Solidification Committee of the Materials Processing & Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

Friction stir welding and processing VIIIproceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Light metals 2012proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2012 Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012 / by: (書目-電子資源)

Energy technology 2016carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dixoide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (書目-電子資源)

Magnesium technology 2015proceedings of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Rare metal technology 2015proceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Essential readings in light metals.Volume 4,Electrode technology for aluminum production by: (書目-電子資源)

Magnesium technology 2012proceedings of symsposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) ; held during TMS 2012 Annual Meeting & Exhibition, Orlando, Flordia, USA, March 11-15, 2012 / by: (書目-電子資源)

Diffusion in solids by: (書目-電子資源)

Characterization of minerals, metals, and materials 2016proceedings of a symposium sponsored by the Materials Characterization Committee of the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

EPD Congress 2015proceedings of a symposia sponsored by the Extraction & Processing Division (EPD) of The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

6th International Symposium on High-Temperature Metallurgical Processingproceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Energy technology 2015carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dioxide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (書目-電子資源)

Magnesium technology 2011proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA February 27-March 3, 2011 / by: (書目-電子資源)

Essential readings in light metals.Volume 3,Cast shop for aluminum production by: (書目-電子資源)

Celebrating the megascaleproceedings of the Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson : proceedings of a symposium sponsored by the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2014, 143rd Annual Meeting & Exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA / by: (書目-電子資源)

TMS 2014143rd Annual Meeting & Exhibition : Annual meeting supplemental proceedings / by: (書目-電子資源)

Fatigue of materials IIIadvances and emergencies in understanding : proceedings of the third biennial symposium ; sponsored by The Minerals, Metals & Materials Society (TMS) and ASM International held during Materials Science & Technology 2014 (MS&T'14), October 12-16, 2014 in Pittsburgh, Pennsylvania / by: (書目-電子資源)

Drying, roasting, and calcining of mineralsproceedings of a symposium sponsored by The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Light metals 2015proceedings of the symposia sponsored by the TMS Alumnium Committee at the TMS 2015 Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (書目-電子資源)

Light metals 2016proceedings of the symposia sponsored by the Aluminum Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (書目-電子資源)

TMS 2016145th Annual Meeting & Exhibition : supplemental proceedings / by: (書目-電子資源)

Proceedings of the 1st International Conference on 3D Materials Scienceheld July 8-12, 2012, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, USA / by: (書目-電子資源)

REWAS 2013enabling materials resource sustainability : proceesdings of the symposium, REWAS 2013: enabling materials resource sustaunability, sponsored by the EPD-LMD Recycling and Environmental Technology Committee and the TMS Materials and Society Committee; and the symposium, Battery Recycling, sponsored by the EMPMD Energy Conversion and Storage Committee and the EPD-LMD Recycling and Environmental Technology Committee ; held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Tex by: (書目-電子資源)

Proceedings of the TMS Middle EastMediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015) : held January 11-14, 2015, Doha, Qatar / by: (書目-電子資源)

Engineering solutions for sustainabilitymaterials and resources II : held at the TMS 2015 Annual Meeting, Orlando, Florida, USA, March 18-19, 2015 / by: (書目-電子資源)

Essential readings in light metals.Volume 1,Alumina and bauxite by: (書目-電子資源)

Advances in molten slags, fluxes, and saltsproceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016 : sponsored by Extraction & Processing Division and Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) ; held May 22-25, 2016, Seattle Grand Hyatt, Seattle, Washington, USA / by: (書目-電子資源)

Essential readings in light metals.Volume 2,Aluminum reduction technology by: (書目-電子資源)

PRICM 8proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing : sponsored by The Chinese Society for Metals (CSM), The Japan Institute of Metals (JIM), The Korean Institute of Metals and Materials (KIM), Materials Australia (MA), and the Minerals, Metals & Materials Society (TMS) ; held August 4-9, 2013, at the Hilton Waikoloa Village in Waikoloa, Hawaii, USA / by: (書目-電子資源)

Energy Materials 2014conference proceedings : November 4-6, 2014, Xi'an, Shaanxi Province, China / by: (書目-電子資源)

HSLA steels 2015, microalloying 2015 & offshore engineering steels 2015conference proceedings, held November 11-13th, 2015, Hangzhou, Zhejiang Province, China / by: (書目-電子資源)

Large-scale production of paper-based Li-ion cells by: (書目-電子資源)

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems.proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /Volume 9 by: (書目-電子資源)

Mechanics of composite and multi-functional materials.proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /Volume 7 by: (書目-電子資源)

Inorganic scintillators for detector systemsphysical principles and crystal engineering / by: (書目-電子資源)

Programming phase-field modeling by: (書目-電子資源)

Materials, energy and environment engineeringselect proceedings of ICACE 2015 / by: (書目-電子資源)

Engineering applications of nanotechnologyfrom energy to drug delivery / by: (書目-電子資源)

Models, simulation, and experimental issues in structural mechanics by: (書目-電子資源)

Proceedings of the IV Advanced Ceramics and Applications Conference by: (書目-電子資源)

Fillers for polymer applications by: (書目-電子資源)

Charge-trapping non-volatile memories.Volume 2,Emerging materials and structures by: (書目-電子資源)

Applications of process engineering principles in materials processing, energy and environmental technologiesan EPD symposium in honor of Professor Ramana G. Reddy / by: (書目-電子資源)

Mechanical and creep behavior of advanced materialsa SMD symposium honoring Professor K. Linga Murty / by: (書目-電子資源)

8th International Symposium on High-Temperature Metallurgical Processing by: (書目-電子資源)

Characterization of minerals, metals, and materials 2017 by: (書目-電子資源)

TMS 2017146th Annual Meeting & Exhibition Supplemental Proceedings / by: (書目-電子資源)

Light metals 2017 by: (書目-電子資源)

Materials processing fundamentals 2017 by: (書目-電子資源)

Proceedings of the 3rd Pan American Materials Congress by: (書目-電子資源)

Friction stir welding and processing IX by: (書目-電子資源)

Magnesium technology 2017 by: (書目-電子資源)

Submicron porous materials by: (書目-電子資源)

Basic thermochemistry in materials processing by: (書目-電子資源)

Green biocompositesdesign and applications / by: (書目-電子資源)

Mixed convection in fluid superposed porous layers by: (書目-電子資源)

Composite materialsprocessing, applications, characterizations / by: (書目-電子資源)

Phosphors, up conversion nano particles, quantum dots and their applications.Volume 1 by: (書目-電子資源)

Material parameter identification and inverse problems in soft tissue biomechanics by: (書目-電子資源)

Solutions manual to accompany Transport phenomena in materials processing by: (書目-電子資源)

CFD modeling and simulation in materials processing 2016proceedings of a symposium sponsored by the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th annual meeting & exhibition, Februrary 14-18, Downton Nashville, Tennessee Music City Center / by: (書目-電子資源)

Light metals 2013proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA March 3-7, 2013 / by: (書目-電子資源)

Materials design and applications by: (書目-電子資源)

Electro-chemo-mechanics of solids by: (書目-電子資源)

Energy materials 2017 by: (書目-電子資源)

Creep in ceramics by: (書目-電子資源)

International Digital Imaging Correlation Societyproceedings of the first Annual Conference, 2016 / by: (書目-電子資源)

Non-traditional micromachining processesfundamentals and applications / by: (書目-電子資源)

Bending behavior of thermoplastic composite sheetsviscoelasticity and temperature dependency in the draping process / by: (書目-電子資源)

Wave dynamics and composite mechanics for microstructured materials and metamaterials by: (書目-電子資源)

Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) by: (書目-電子資源)

Mechanics for materials and technologies by: (書目-電子資源)

On the time and temperature dependent behaviour of laminated amorphous polymers subjected to low-velocity impact by: (書目-電子資源)

Protection of materials and structures from the space environmentICPMSE-11 / by: (書目-電子資源)

Polymer-engineered nanostructures for advanced energy applications by: (書目-電子資源)

Novel Bismuth-Oxyhalide-based materials and their applications by: (書目-電子資源)

Ultrathin carbon-based overcoats for extremely high density magnetic recording by: (書目-電子資源)

Smart and multifunctional concrete toward sustainable infrastructures by: (書目-電子資源)

The theory of laser materials processingheat and mass transfer in modern technology / by: (書目-電子資源)

Deformation and fracture behaviour of polymer materials by: (書目-電子資源)

Raw materials substitution sustainability by: (書目-電子資源)

Applied metallurgy and corrosion controla handbook for the petrochemical industry / by: (書目-電子資源)

Ceramic membranes applied in separation processes by: (書目-電子資源)

The political economy of Russian aluminiumbetween the dual state and global markets / by: (書目-電子資源)

Wood polymer nanocompositeschemical modifications, properties and sustainable applications / by: (書目-電子資源)

Advances in nanomaterialsfundamentals, properties and applications / by: (書目-電子資源)

Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applicationspresented at the XXV International Materials Research Congress - Cancun 2016 / by: (書目-電子資源)

Physical test methods for elastomers by: (書目-電子資源)

Electrochemistry for corrosion fundamentals by: (書目-電子資源)

Carbonthe black, the gray and the transparent / by: (書目-電子資源)

Frontiers in materials processing, applications, research and technologyselect proceedings of FiMPART 2015 / by: (書目-電子資源)

Bionanocomposites for packaging applications by: (書目-電子資源)

Ferroic functional materialsexperiment, modeling and simulation / by: (書目-電子資源)

Spin dynamics and damping in ferromagnetic thin films and nanostructures by: (書目-電子資源)

Proceedings of the International Conference on Microplastic Pollution in the Mediterranean Sea by: (書目-電子資源)

China's high-speed rail technologyan international perspective / by: (書目-電子資源)

Materials processing fundamentals 2018 by: (書目-電子資源)

Characterization of minerals, metals, and materials 2018 by: (書目-電子資源)

9th International Symposium on High-Temperature Metallurgical processing by: (書目-電子資源)

Magnesium technology 2018 by: (書目-電子資源)

Metal-matrix composites innovations, advances and applicationsan SMD Symposium in Honor of William C. Harrigan, Jr. / by: (書目-電子資源)

TMS 2018 147th Annual Meeting & Exhibition supplemental proceedings by: (書目-電子資源)

Light Metals 2018 by: (書目-電子資源)

Advanced high strength steelprocessing and applications / by: (書目-電子資源)

Shock and materials by: (書目-電子資源)

Proceedings of the International Conference on Martensitic TransformationsChicago / by: (書目-電子資源)

Modeling, design, construction, and operation of power generators with solid oxide fuel cellsfrom single cell to complete power system / by: (書目-電子資源)

Renewable and sustainable materials in green technology by: (書目-電子資源)

Magnetostatic modelling of thin layers using the method of moments and its implementation in Octave/Matlab by: (書目-電子資源)

Advanced functional materialsproceedings of Chinese Materials Conference 2017 / by: (書目-電子資源)

Materials that movesmart materials, intelligent design / by: (書目-電子資源)

Progress in materials science and engineering by: (書目-電子資源)

Mechanical properties and working of metals and alloys by: (書目-電子資源)

Fire retardancy behavior of polymer/clay nanocomposites by: (書目-電子資源)

Handbook of sol-gel science and technologyprocessing, characterization and applications / by: (書目-電子資源)

Advanced manufacturing and materials scienceselected extended papers of ICAMMS 2018 / by: (書目-電子資源)

The selected models of the mesostructure of compositespercolation, clusters, force fields / by: (書目-電子資源)

Phase equilibria diagrams of high-temperature non-oxide ceramics by: (書目-電子資源)

Carbon and metal oxides based nanomaterials for flexible high performance asymmetric supercapacitors by: (書目-電子資源)

Computer algebra and materials physicsa practical guidebook to group theoretical computations in materials science / by: (書目-電子資源)

Acetylene and its polymers150+ years of history / by: (書目-電子資源)

Springer handbook of materials data by: (書目-電子資源)

Materials handbooka concise desktop reference / by: (書目-電子資源)

Powerful pulsed plasma generatorsresearch and application / by: (書目-電子資源)

Doped-ceria electrolytessynthesis, sintering and characterization / by: (書目-電子資源)

Extraction 2018proceedings of the First Global Conference on Extractive Metallurgy / by: (書目-電子資源)

Physical metallurgy of cast irons by: (書目-電子資源)

Industrial applications of poly(lactic acid) by: (書目-電子資源)

Materials chemistry by: (書目-電子資源)

Handbook of materials characterization by: (書目-電子資源)

Corrosion science and engineering by: (書目-電子資源)

Materials discovery and designby means of data science and optimal learning / by: (書目-電子資源)

Solidification processing of metallic alloys under external fields by: (書目-電子資源)

Advances in polymer sciences and technologyselect papers from APA 2017 / by: (書目-電子資源)

Polymer reaction engineering of dispersed systems.Volume I by: (書目-電子資源)

Polymer reaction engineering of dispersed systems.Volume II by: (書目-電子資源)

3D printing and additive manufacturing technologies by: (書目-電子資源)

Strengthening and Joining by Plastic Deformationselect papers from AIMTDR 2016 / by: (書目-電子資源)

Cascade use in technologies 2018Internationale Konferenz zur Kaskadennutzung und Kreislaufwirtschaft - Oldenburg 2018 / by: (書目-電子資源)

Advances in materials and metallurgyselect proceedings of ICEMMM 2018 / by: (書目-電子資源)

Hot stamping of ultra high-strength steelsfrom a technological and business perspective / by: (書目-電子資源)

Advances in manufacturing processesselect proceedings of ICEMMM 2018 / by: (書目-電子資源)

Reliability of selective laser melted AlSi12 alloy for quasistatic and fatigue applications by: (書目-電子資源)

Pipeline steels for sour service by: (書目-電子資源)

Nano-energetic materials by: (書目-電子資源)

Die-attach materials for high temperature applications in microelectronics packagingmaterials, processes, equipment, and reliability / by: (書目-電子資源)

Shape casting7th International Symposium Celebrating Prof. John Campbell's 80th Birthday / by: (書目-電子資源)

Advanced real time imaging IIcutting-edge techniques in materials science studies / by: (書目-電子資源)

Materials processing fundamentals 2019 by: (書目-電子資源)

Bio-based polymers and nanocompositespreparation, processing, properties and performance / by: (書目-電子資源)

Advances in thin films, nanostructured materials, and coatingsselected papers from the 2018 International Conference on "Nanomaterials: Applications & Properties" / by: (書目-電子資源)

Physics and techniques of ceramic and polymeric materialsproceedings of Chinese Materials Conference 2018 / by: (書目-電子資源)

Advances and challenges in structural engineeringproceedings of the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 : the Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (書目-電子資源)

Dynamic behavior of materials.proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /Volume 1 by: (書目-電子資源)

Friction stir welding and processing X by: (書目-電子資源)

10th International Symposium on High-Temperature Metallurgical Processing by: (書目-電子資源)

Magnesium technology 2019 by: (書目-電子資源)

REWAS 2019manufacturing the circular materials economy / by: (書目-電子資源)

Light metals 2019 by: (書目-電子資源)

Spark plasma sintering of materialsadvances in processing and applications / by: (書目-電子資源)

Green materials engineeringan EPD Symposium in honor of Sergio Monteiro / by: (書目-電子資源)

TMS 2019 148th annual meeting & exhibition supplemental proceedings by: (書目-電子資源)

Characterization of minerals, metals, and materials 2019 by: (書目-電子資源)

Handbook of ecomaterials by: (書目-電子資源)

Self-healing nanotextured vascular engineering materials by: (書目-電子資源)

Polypropylene handbookmorphology, blends and composites / by: (書目-電子資源)

Highway engineering composite material and its application by: (書目-電子資源)

Willemite-based glass ceramic doped by different percentage of erbium oxide and sintered in temperature of 500-1100Cphysical and optical properties / by: (書目-電子資源)

Novel aspects of diamondfrom growth to applications / by: (書目-電子資源)

Vibration analysis of functionally graded piezoelectric actuators by: (書目-電子資源)

Semiconducting metal oxides for gas sensing by: (書目-電子資源)

Materials design and applications.II by: (書目-電子資源)

Advances in materials, mechanical and industrial engineeringselected contributions from the First International Conference on Mechanical Engineering, Jadavpur University, Kolkata, India / by: (書目-電子資源)

Handbook of nonlocal continuum mechanics for materials and structures by: (書目-電子資源)

Advanced engineering for processes and technologies by: (書目-電子資源)

Near net shape manufacturing processes by: (書目-電子資源)

Anisotropic metal chalcogenide nanomaterialssynthesis, assembly, and applications / by: (書目-電子資源)

Micro-electrical discharge machining processestechnologies and applications / by: (書目-電子資源)

Innovation in materials science and engineeringproceedings of ICEMIT 2017.Volume 2 / by: (書目-電子資源)

Handbook of mechanics of materials by: (書目-電子資源)

High-entropy materialsa brief introduction / by: (書目-電子資源)

Mechanical fatigue of metalsexperimental and simulation perspectives / by: (書目-電子資源)

Characterisation of turbulent duct flowsexperiments and direct numerical simulations / by: (書目-電子資源)

Sustainable lignin for carbon fibersprinciples, techniques and applications / by: (書目-電子資源)

Nanoelectronic materialsfundamentals and applications / by: (書目-電子資源)

Functional textiles and clothing by: (書目-電子資源)

Materials and manufacturing processes by: (書目-電子資源)

Computational homogenization of heterogeneous materials with finite elements by: (書目-電子資源)

Marine-derived biomaterials for tissue engineering applications by: (書目-電子資源)

Trends in materials engineeringselect proceedings of ICFTMM 2018 / by: (書目-電子資源)

Mechanical properties of silicon based compoundssilicides / by: (書目-電子資源)

Clean ironmaking and steelmaking processesefficient technologies for greenhouse emissions abatement / by: (書目-電子資源)

Particles in contactmicro mechanics, micro process dynamics and particle collective / by: (書目-電子資源)

Progress in engineering technologyautomotive, energy generation, quality control and efficiency / by: (書目-電子資源)

Structural materialsproperties and selection / by: (書目-電子資源)

IRC-SET 2018proceedings of the 4th IRC Conference on Science, Engineering and Technology / by: (書目-電子資源)

Surface engineering of graphene by: (書目-電子資源)

Nanoengineering materials for biomedical uses by: (書目-電子資源)

Electronic waste and printed circuit board recycling technologies by: (書目-電子資源)

Graphene functionalization strategiesfrom synthesis to applications / by: (書目-電子資源)

Properties of fresh and hardened concrete containing supplementary cementitious materialsstate-of-the-art report of the RILEM Technical Committee 238-SCM, Working Group 4 / by: (書目-電子資源)

Advances in sustainable polymersprocessing and applications / by: (書目-電子資源)

Advanced functional materials from nanopolysaccharides by: (書目-電子資源)

Light weighting for defense, aerospace, and transportation by: (書目-電子資源)

Innovations and breakthroughs in the gold and silver industriesconcepts, applications and future trends / by: (書目-電子資源)

A practical guide to surface metrology by: (書目-電子資源)

Thermal properties of bio-based polymers by: (書目-電子資源)

Deformation processes in TRIP/TWIP steelsin-situ characterization techniques / by: (書目-電子資源)

Ligninbiosynthesis and transformation for industrial applications / by: (書目-電子資源)

Proceedings of the 2nd International Conference on Microplastic Pollution in the Mediterranean Sea by: (書目-電子資源)

Revolutionizing aircraft materials and processes by: (書目-電子資源)

Integrated computational materials engineering (ICME)advancing computational and experimental methods / by: (書目-電子資源)

Surface engineering of modern materials by: (書目-電子資源)

Wood & fire safetyproceedings of the 9th International Conference on Wood & Fire Safety 2020 / by: (書目-電子資源)

RF power semiconductor generator application in heating and energy utilization by: (書目-電子資源)

Molecular nanomagnetsfundamental understanding / by: (書目-電子資源)

Energy Technology 2020recycling, carbon dioxide management, and other technologies / by: (書目-電子資源)

Aquatic biopolymersunderstanding their industrial significance and environmental implications / by: (書目-電子資源)

Rare Metal Technology 2020 by: (書目-電子資源)

11th International Symposium on High-Temperature Metallurgical Processing by: (書目-電子資源)

PbZn 20209th International Symposium on Lead and Zinc Processing / by: (書目-電子資源)

Light metals 2020 by: (書目-電子資源)

Thermophysical properties and measuring technique of Ge-Sb-Te alloys for phase change memory by: (書目-電子資源)

Materials processing fundamentals 2020 by: (書目-電子資源)

Green production of carbon nanomaterials in molten salts and applications by: (書目-電子資源)

Advances in powder and ceramic materials science by: (書目-電子資源)

Solid-state weldingfriction and friction stir welding processes / by: (書目-電子資源)

Advances in mechanical engineeringselect proceedings of ICRIDME 2018 / by: (書目-電子資源)

Vapor crystal growth and characterizationZnSe and related II-VI compound semiconductors / by: (書目-電子資源)

Plasticity, damage and fracture in advanced materials by: (書目-電子資源)

TMS 2020 149th Annual Meeting & Exhibition Supplemental proceedings by: (書目-電子資源)

Pineapple leaf fibersprocessing, properties and applications / by: (書目-電子資源)

Reference materials in measurement and technologyproceedings of the Third International Scientific Conference / by: (書目-電子資源)

Advanced materials for defensedevelopment, analysis and applications / by: (書目-電子資源)

Corrosion processessensing, monitoring, data analytics, prevention/protection, diagnosis/prognosis and maintenance strategies / by: (書目-電子資源)

Emerging research in science and engineering based on advanced experimental and computational strategies by: (書目-電子資源)

Mechanics of composite and multi-functional materials.proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics /Volume 5 by: (書目-電子資源)

iMEC-APCOMS 2019proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems / by: (書目-電子資源)

Aerospace alloys by: (書目-電子資源)

Advances in additive manufacturing and joiningproceedings of AIMTDR 2018 / by: (書目-電子資源)

ICAF 2019structural integrity in the age of additive manufacturing : proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, June 2-7, 2019, Krakow, Poland / by: (書目-電子資源)

Interface influence on moisture transport in building componentsthe wetting process / by: (書目-電子資源)

Shape memory polymers, blends and compositesadvances and applications / by: (書目-電子資源)

Engineering design applications IIstructures, materials and processes / by: (書目-電子資源)

Bismuth-ferrite-based electrochemical supercapacitors by: (書目-電子資源)

Austenitic TRIP/TWIP steels and steel-zirconia compositesdesign of tough, transformation-strengthened composites and structures / by: (書目-電子資源)

Advances in materials science and engineeringselect proceedings of ICFMMP 2019 / by: (書目-電子資源)

Additive manufacturing processes by: (書目-電子資源)

Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced MaterialsICE-SEAM 2019, 16-17 October 2019, Surakarta, Indonesia / by: (書目-電子資源)

Progress in engineering technology II by: (書目-電子資源)

The world of materials by: (書目-電子資源)

Introduction to refractories for iron- and steelmaking by: (書目-電子資源)

Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (書目-電子資源)

Architecting robust co-design of materials, products, and Manufacturing Processes by: (書目-電子資源)

Advances in Materials Processingselect proceedings of ICFMMP 2019 / by: (書目-電子資源)

Biointerface engineeringprospects in medical diagnostics and drug delivery / by: (書目-電子資源)

Mechanics of metamaterials with negative parameters by: (書目-電子資源)

Wooden facades and fire safetyeffects of joint type on ignition behaviour / by: (書目-電子資源)

Platinum monolayer electrocatalysts by: (書目-電子資源)

Fibers for technical textiles by: (書目-電子資源)

Handbook of engineering practice of materials and corrosion by: (書目-電子資源)

Mold and core sands in metalcastingchemistry and ecology : sustainable development / by: (書目-電子資源)

Phase transformation in metalsmathematics, theory and practice / by: (書目-電子資源)

CT scan generated material twins for composites manufacturing in Industry 4.0 by: (書目-電子資源)

Handbook of advanced ceramics and compositesdefense, security, aerospace and energy applications / by: (書目-電子資源)

Self-healing and self-recovering hydrogels by: (書目-電子資源)

Monodisperse highly ordered and polydisperse biobased solid foams by: (書目-電子資源)

Analysis of glass panels subjected to blast load by: (書目-電子資源)

Basic quantum mechanics by: (書目-電子資源)

Proceedings of the 4th International Symposium on Materials and Sustainable Development.Volume 1,Nano technology and advanced materials by: (書目-電子資源)

Engineering of thermoplastic elastomer with graphene and other anisotropic nanofillers by: (書目-電子資源)

Proceedings of the 4th International Symposium on Materials and Sustainable Development.Volume 2,Waste recycling and environment by: (書目-電子資源)

Date palm fiber compositesprocessing, properties and applications / by: (書目-電子資源)

An insight into metal based foamsprocessing, properties and applications / by: (書目-電子資源)

Geopolymer and geopolymer matrix composites by: (書目-電子資源)

Advances in sustainable polymerssynthesis, fabrication and characterization / by: (書目-電子資源)

Revolution of perovskitesynthesis, properties and applications / by: (書目-電子資源)

A virtual testing approach for honeycomb sandwich panel joints in aircraft interior by: (書目-電子資源)

Advances in polymer processing 2020proceedings of the International Symposium on Plastics Technology / by: (書目-電子資源)

Heatmetrythe science and practice of heat flux measurement / by: (書目-電子資源)

Mechanical behavior and fracture of engineering materials by: (書目-電子資源)

Superconductivityfrom materials science to practical applications / by: (書目-電子資源)

Environmental remediation through carbon based nano composites by: (書目-電子資源)

Adaptronics - smart structures and materials by: (書目-電子資源)

Laser cladding of metals by: (書目-電子資源)

Novel lanthanum zirconate-based thermal barrier coatings for energy applications by: (書目-電子資源)

Phenolic polymers based composite materials by: (書目-電子資源)

Bamboo fiber compositesprocessing, properties and applications / by: (書目-電子資源)

Multiscale solid mechanicsstrength, durability, and dynamics / by: (書目-電子資源)

Advances in mechanical processing and designselect proceedings of ICAMPD 2019 / by: (書目-電子資源)

Structural health monitoring system for synthetic, hybrid and natural fiber composites by: (書目-電子資源)

Tribological applications of composite materials by: (書目-電子資源)

Materials research and applicationsselect papers from JCH8-2019 / by: (書目-電子資源)

Graphene based biopolymer nanocomposites by: (書目-電子資源)

High-performance ferrous alloys by: (書目-電子資源)

Functional textiles and clothing 2020 by: (書目-電子資源)

Machining and machinability of fiber reinforced polymer composites by: (書目-電子資源)

Sustainable issues in infrastructure engineeringthe official 2020 publication of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (書目-電子資源)

Strength of materials by: (書目-電子資源)

Contemporary nanomaterials in material engineering applications by: (書目-電子資源)

Eco-friendly adhesives for wood and natural fiber compositescharacterization, fabrication and applications / by: (書目-電子資源)

Computational materials, chemistry, and biochemistryfrom bold initiatives to the last mile : in honor of William A. Goddard's contributions to science and engineering.Volume 2 / by: (書目-電子資源)

Biocomposite materialsdesign and mechanical properties characterization / by: (書目-電子資源)

Innovations in everyday engineering materials by: (書目-電子資源)

Advances in hybrid conducting polymer technology by: (書目-電子資源)

Collagen biografts for tunable drug delivery by: (書目-電子資源)

Carbide in special steelformation mechanism and control technology / by: (書目-電子資源)

Crosslinkable polyethylene based blends and nanocomposites by: (書目-電子資源)

Electrochemical methods of nanostructure preparation by: (書目-電子資源)

Graphene and nanoparticles hybrid nanocompositesfrom preparation to applications / by: (書目-電子資源)

Comprehensive utilization of magnesium slag by pidgeon process by: (書目-電子資源)

Crosslinkable polyethylenemanufacture, properties, recycling, and applications / by: (書目-電子資源)

Inert anodes for aluminum electrolysis by: (書目-電子資源)

Dynamic behavior of materials.proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /Volume 1 by: (書目-電子資源)

Mechanics of composite, hybrid and multifunctional materials.proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /Volume 6 by: (書目-電子資源)

Advances in engineering materialsselect proceedings of FLAME 2020 / by: (書目-電子資源)

Cold spray additive manufacturingfrom fundamentals to applications / by: (書目-電子資源)

Classical and relativistic rational extended thermodynamics of gases by: (書目-電子資源)

Advances in design, simulation and manufacturing IVproceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (書目-電子資源)

Advances in design, simulation and manufacturing IVproceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.Volume 2,Mechanical and chemical engineering / by: (書目-電子資源)

Handbook of spine technology by: (書目-電子資源)

Energy-sustainable advanced materials by: (書目-電子資源)

Data technology in materials modelling by: (書目-電子資源)

Artificial intelligence for materials science by: (書目-電子資源)

Advances in manufacturing engineering and materials IIproceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), 21-25 June, 2021, Novy Smokovec, Slovakia / by: (書目-電子資源)

Fracture, fatigue, failure and damage evolution.proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /Volume 3 by: (書目-電子資源)

Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020) by: (書目-電子資源)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020).Volume I by: (書目-電子資源)

Challenges in mechanics of time dependent materials.proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /Volume 2 by: (書目-電子資源)

Ammonothermal synthesis and crystal growth of nitrideschemistry and technology / by: (書目-電子資源)

Friction stir welding and processing XI by: (書目-電子資源)

Materials with extreme wetting propertiesmethods and emerging industrial applications / by: (書目-電子資源)

Ni-Co 2021the 5th International Symposium on Nickel and Cobalt / by: (書目-電子資源)

Materials design and applications.III by: (書目-電子資源)

Materials engineering--from ideas to practicean EPD Symposium in honor of Jiann-Yang Hwang / by: (書目-電子資源)

Electrospinning for advanced energy storage applications by: (書目-電子資源)

Materials, design, and manufacturing for sustainable environmentselect proceedings of ICMDMSE 2020 / by: (書目-電子資源)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020).Volume II by: (書目-電子資源)

Intelligent quality assessment of railway switches and crossings by: (書目-電子資源)

Physical chemistry of metallurgical processes by: (書目-電子資源)

Iron-based superconducting thin films by: (書目-電子資源)

Structural materialsbehavior, testing and evaluation / by: (書目-電子資源)

Ten materials that shaped our world by: (書目-電子資源)

Handbook of nanomaterials and nanocomposites for energy and environmental applications by: (書目-電子資源)

New approaches of geotechnical engineeringsoil characterization, sustainable materials and numerical simulation : proceedings of the 6th GeoChina International Conference on Civil & Transportation Infrastructures : from Engineering to Smart & Green Life Cycle Solutions -- Nanchang, China, 2021 / by: (書目-電子資源)

Advances in machining of composite materialsconventional and non-conventional processes / by: (書目-電子資源)

Advances in materials processing and manufacturing applicationsproceedings of iCADMA 2020 / by: (書目-電子資源)

Advances in mechanical engineeringselect proceedings of CAMSE 2020 / by: (書目-電子資源)

Physics and chemistry of Te and HgTe-based ternary semiconductor melts by: (書目-電子資源)

Limestone mining in India by: (書目-電子資源)

Manufacturing automotive components from sustainable natural fiber composites by: (書目-電子資源)

Fiberglass science and technologychemistry, characterization, processing, modeling, application, and sustainability / by: (書目-電子資源)

Practical approach to 3D weaving by: (書目-電子資源)

Thermal spray fundamentalsfrom powder to part / by: (書目-電子資源)

6th International Conference on Adhesive Bonding 2021selected contributions of AB 2021 / by: (書目-電子資源)

Handbook of laser micro- and nano-engineering by: (書目-電子資源)

High-entropy materialstheory, experiments, and applications / by: (書目-電子資源)

Resistive switchingoxide materials, mechanisms, devices and operations / by: (書目-電子資源)

Fundamentals of metal joiningprocesses, mechanism and performance / by: (書目-電子資源)

Advanced materialsan introduction to modern materials science / by: (書目-電子資源)

Hydrometallurgyfundamentals and applications / by: (書目-電子資源)

Impact damages of braided composites by: (書目-電子資源)

Advanced mems/nems fabrication and sensors by: (書目-電子資源)

Recent advances in manufacturing engineering and processesproceedings of ICMEP 2021 / by: (書目-電子資源)

Local and nonlocal micromechanics of heterogeneous materials by: (書目-電子資源)

Advancement in materials, manufacturing and energy engineering.select proceedings of ICAMME 2021 /Vol. I by: (書目-電子資源)

High-performance composite structuresadditive manufacturing and processing / by: (書目-電子資源)

Mechanics of composite, hybrid and multifunctional materials, fracture, fatigue, failure and damage evolution.proceedings of the 2021 Annual Conference on Experimental and Applied Mechanics /Volume 3 by: (書目-電子資源)

Smelter grade alumina from bauxitehistory, best practices, and future challenges / by: (書目-電子資源)

Theory and technology of roll stamping by: (書目-電子資源)

REWAS 2022developing tomorrow's technical cycles.(Volume I) / by: (書目-電子資源)

Characterization of minerals, metals, and materials 2022 by: (書目-電子資源)

Furnace tapping 2022 by: (書目-電子資源)

12th International Symposium on High-Temperature Metallurgical Processing by: (書目-電子資源)

Challenges in mechanics of time dependent materials, mechanics of biological systems and materials & micro-and nanomechanics.proceedings of the 2021 Annual Conference & Exposition on Experimental and Applied Mechanics /Volume 2 by: (書目-電子資源)

Advances in mechanical and materials technologyselect proceedings of EMSME 2020.Volume 2 / by: (書目-電子資源)

COVID-19 pandemicresearch and development activities from modeling to realization / by: (書目-電子資源)

Advancement in materials, manufacturing and energy engineering.select proceedings of ICAMME 2021 /Vol. II by: (書目-電子資源)

In situ characterization methodology for the design and analysis of composite pressure vessels by: (書目-電子資源)

Hydrogen in engineering metallic materialsfrom atomic-level interactions to mechanical properties / by: (書目-電子資源)

Characterization of nanomaterials in liquid disperse systems by: (書目-電子資源)

Carbon composite catalystspreparation, structural and morphological property and applications / by: (書目-電子資源)

Materials, structures and manufacturing for aircraft by: (書目-電子資源)

Silicon sensors and actuatorsthe feynman roadmap / by: (書目-電子資源)

Advances in manufacturing III.Volume 4,Measurement and control systems: research and technology innovations, Industry 4.0 by: (書目-電子資源)

Proceedings of the 7th International Conference on Nanomanufacturing (nanoMan2021) by: (書目-電子資源)

Precision forging technology and equipment for aluminum alloy by: (書目-電子資源)

Hydrogen assisted direct reduction of iron oxides by: (書目-電子資源)

Advances in mechanical engineering and material scienceselect proceedings of ICAMEMS-2022 / by: (書目-電子資源)

Advances in manufacturing III.Volume 1,Mechanical engineering: research and technology innovations, Industry 4.0 by: (書目-電子資源)

Recent trends in design, materials and manufacturingselected proceedings of ICRADMM 2020 / by: (書目-電子資源)

Additive, subtractive, and hybrid technologiesrecent innovations in manufacturing / by: (書目-電子資源)

Mechanism-based assessment of structural and functional behavior of sustainable cottonid by: (書目-電子資源)

Electron beam wire deposition technology and its application by: (書目-電子資源)

Advances in design, simulation and manufacturing Vproceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland.Volume 1,Manufacturing and materials engineering / by: (書目-電子資源)

Recent advances in materials and modern manufacturingselect proceedings of ICAMMM 2021 / by: (書目-電子資源)

Advanced transdisciplinary engineering and technology by: (書目-電子資源)

2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials by: (書目-電子資源)

TMS 2022 151st annual meeting & exhibitionsupplemental proceedings / by: (書目-電子資源)

Metal-matrix compositesadvances in processing, characterization, performance and analysis / by: (書目-電子資源)

Topological states for new modes of information storage and transfera survey of the status of the discovery of the majorana modes in the solid state / by: (書目-電子資源)

Lignocellulosic fiberssustainable biomaterials for green composites / by: (書目-電子資源)

Bio-fiber reinforced composite materialsmechanical, thermal and tribological properties / by: (書目-電子資源)

Advances in nanocomposite materials for environmental and energy harvesting applications by: (書目-電子資源)

Welding simulations using ABAQUSa practical guide for engineers / by: (書目-電子資源)

Nondestructive testing and evaluation of fiber-reinforced composite structures by: (書目-電子資源)

Advancement in materials processing technologyselect proceedings of AMPT 2020 / by: (書目-電子資源)

Textile and fashion education internationalizationa promising discipline from Southeast Asia / by: (書目-電子資源)

Electron microscopy in science and engineering by: (書目-電子資源)

Advanced materials and engineering technologies by: (書目-電子資源)

Advanced engineering of materials through lasers by: (書目-電子資源)

Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia by: (書目-電子資源)

Novel lights sources beyond free electron lasers by: (書目-電子資源)

Flexible OLEDsfundamental and novel practical technologies / by: (書目-電子資源)

Future landscape of structural materials in India by: (書目-電子資源)

Reference materials in measurement and technologyproceedings of the fourth International Scientific Conference / by: (書目-電子資源)

Chitin and chitosanscience and engineering / by: (書目-電子資源)

Flexible metal forming technologiesprinciples, process and equipment / by: (書目-電子資源)

Premetered coating methodsattractiveness and limitations / by: (書目-電子資源)

Solid state engineering physics by: (書目-電子資源)

Advanced nanomaterials by: (書目-電子資源)

Fire hazards of electrical cables by: (書目-電子資源)

Theory and practice of thermal transient testing of electronic components by: (書目-電子資源)

Applications of high energy radiationssynthesis and processing of polymeric materials / by: (書目-電子資源)

Springer handbook of advanced catalyst characterization by: (書目-電子資源)

Chemical engineering principles and applications by: (書目-電子資源)

Advances in geoengineering, geotechnologies, and geoenvironment for earth systems and sustainable georesources managementproceedings of the 1st Conference on Georesources, Geomaterials, Geotechnologies and Geoenvironment (4GEO), Porto, 2019 / by: (書目-電子資源)

Proceeding of 5th International Conference on Advances in Manufacturing and Materials EngineeringICAMME 2022, 9-10 August, Kuala Lumpur, Malaysia / by: (書目-電子資源)

Advances in additive manufacturing and metal joiningproceedings of AIMTDR 2021 / by: (書目-電子資源)

Advances in design, simulation and manufacturing VI.proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6-9, 2023, High Tatras, Slovak Republic /Volume 2,Mechanical and materials engineering by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ICRAMERD 2022 / by: (書目-電子資源)

Dissimilar metal joining by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of FLAME 2022 / by: (書目-電子資源)

Progress in engineering technology V by: (書目-電子資源)

Epoxidised natural rubberproperties & applications / by: (書目-電子資源)

Structural integrity and monitoring for composite materials by: (書目-電子資源)

Friction stir welding and processing XII by: (書目-電子資源)

Fiber reinforced polymeric materials and sustainable structures by: (書目-電子資源)

Proceedings of the 2nd International Conference on Water Energy Food and Sustainability (ICoWEFS 2022) by: (書目-電子資源)

Crystallographic texture and group representations by: (書目-電子資源)

Recent advances in manufacturing engineering and processesproceedings of ICMEP 2022 / by: (書目-電子資源)

Manufacturing control of textile materialsoperational computerized non-contact methods / by: (書目-電子資源)

Proceedings of International Conference on Intelligent Manufacturing and AutomationICIMA 2022 / by: (書目-電子資源)

A two-dimensional piezoresistivity model for anisotropic materials and its application in self-sensing of carbon fiber reinforced plastics by: (書目-電子資源)

Physicochemical aspects of metal-organic frameworksa new class of coordinative materials / by: (書目-電子資源)

Advancements in materials science and technology led by women by: (書目-電子資源)

Resource recovery and recycling from waste metal dust by: (書目-電子資源)

Springer handbook of wood science and technology by: (書目-電子資源)

Thin filmsprocesses and characterization techniques / by: (書目-電子資源)

Key basic scientific problems on near-space vehicles by: (書目-電子資源)

Metal micro-droplet based 3D printing technology by: (書目-電子資源)

Materials design and applications IV by: (書目-電子資源)

Green-based nanocomposite materials and applications by: (書目-電子資源)

Multifunctional epoxy resinsself-healing, thermally and electrically conductive resins / by: (書目-電子資源)

Advanced manufacturing processes IVselected papers from the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), September 6-9, 2022, Odessa, Ukraine / by: (書目-電子資源)

Advances in mechanical and energy technologyselect proceedings of ICMET 2021 / by: (書目-電子資源)

Design and modeling of mechanical systems - Vproceedings of the 9th Conference on Design and Modeling of Mechanical Systems, CMSM'2021, December 20-22, 2021, Hammamet, Tunisia / by: (書目-電子資源)

Materials, design and manufacturing for sustainable environmentselect proceedings of ICMDMSE 2022 / by: (書目-電子資源)

Probability-based multi-objective optimization for material selection by: (書目-電子資源)

Proceedings of the 7th International Corrosion Prevention Symposium for Research ScholarsCORSYM 2021, November 2021 / by: (書目-電子資源)

Proceedings of the Munich Symposium on Lightweight Design 2021Tagungsband zum Münchner Leichtbauseminar 2021 / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ERCAM 2021 / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ICOME 2021 / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of CAMSE 2021 / by: (書目-電子資源)

Slag-steel reaction and control of inclusions in Al deoxidized special steel by: (書目-電子資源)

Recent trends in product design and intelligent manufacturing systemsselect proceedings of IPDIMS 2021 / by: (書目-電子資源)

Reinforced concretebasic theory and standards / by: (書目-電子資源)

Modern hydroforming technology by: (書目-電子資源)

Advances in functional and smart materialsselect proceedings of ICFMMP 2021 / by: (書目-電子資源)

Sustainable chemical, mineral and material processingselect proceedings of 74th Annual Session of Indian Institute of Chemical Engineers (CHEMCON-2021) / by: (書目-電子資源)

Minimum quantity lubrication machiningprocess analysis and analytical modeling / by: (書目-電子資源)

Recent developments in mechanics and designselect proceedings of INCOME 2021 / by: (書目-電子資源)

Road planning - freeways and country roads by: (書目-電子資源)

Emerging trends in mechanical and industrial engineeringselect proceedings of ICETMIE 2022 / by: (書目-電子資源)

Engineering design applications IVstructures, materials and processes / by: (書目-電子資源)

Multifunctional boron-nitride compositespreparation, properties and applications / by: (書目-電子資源)

Electroslag remelting towards clean steel by: (書目-電子資源)

Additive manufacturingdesign, processes and applications / by: (書目-電子資源)

Thin-walled composite protective structures for crashworthiness applicationsrecent advances and future developments / by: (書目-電子資源)

Semiconducting metal oxides for gas sensing by: (書目-電子資源)

Proceedings of the 3rd annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).Volume 1,Advanced materials and manufacturing technologies by: (書目-電子資源)

Proceedings of the 8th International Conference on Mechanical, Automotive and Materials EngineeringCMAME 2022, 16-18 December, Hanoi, Vietnam / by: (書目-電子資源)

Polymer 3D printing and 3D copying technology by: (書目-電子資源)

Advancement of science and technologymaterials and energy / by: (書目-電子資源)

Recent advances in materials and manufacturing technologyselect proceedings of ICAMMT 2022 / by: (書目-電子資源)

Engineered stabilitythe history of composite materials in the 19th and 20th Centuries / by: (書目-電子資源)

Modern optimization techniques for advanced machiningheuristic and metaheuristic techniques / by: (書目-電子資源)

Recent advances in intelligent manufacturingselect proceedings of ICAME 2022 / by: (書目-電子資源)

Advances in mechanics of materials for environmental and civil engineering by: (書目-電子資源)

Emerging trends in materials research and manufacturing processes by: (書目-電子資源)

Engineering design applications Vstructures, materials and processes / by: (書目-電子資源)

Nanomaterials based printed strain sensor for wearable health monitoring applications by: (書目-電子資源)

Recycled polymer blends and compositesprocessing, properties, and applications / by: (書目-電子資源)

Proceedings of the 6th Asia Pacific Conference on Manufacturing Systems and 4th International Manufacturing Engineering ConferenceAPCOMS-IMEC 2022, Surakarta, Indonesia / by: (書目-電子資源)

Proceedings of the International Symposium on Lightweight and Sustainable Polymeric Materials (LSPM23) by: (書目-電子資源)

Selected papers from ICIR EUROINVENT - 2023International Conference on Innovative Research / by: (書目-電子資源)

Proceedings of the 3rd International Conference on Microplastic Pollution in the Mediterranean Sea by: (書目-電子資源)

Progress in continuum mechanics by: (書目-電子資源)

Proceedings of the 28th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2022ICEC28-ICMC 2022, Hangzhou, China / by: (書目-電子資源)

70 years of China's bridges by: (書目-電子資源)

Vanadium-based nanomaterials for electrochemical energy storage by: (書目-電子資源)

Materialising the futurea learning path to understand, develop and apply emerging materials and technologies / by: (書目-電子資源)

Carburising and nitriding of iron alloys by: (書目-電子資源)

High-performance metallic composites fabricated by advanced rolling techniques by: (書目-電子資源)

Steel 4.0digitalization in steel industry / by: (書目-電子資源)

Recent advancements in mechanical engineeringselect proceedings of ICRAME 2022 / by: (書目-電子資源)

Joining operations for aerospace materials by: (書目-電子資源)

Applied building physics and materials science of natural fiber reinforced plasticsa guide for study and practice / by: (書目-電子資源)

Proceedings of the 3rd International Conference on Advanced Surface Enhancement (INCASE) 2023Surface engineering for sustainability / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ICRAMERD 2023 / by: (書目-電子資源)

Mistakes before, during and after heat treatment of steel by: (書目-電子資源)

Ultraviolet light curable piezoelectric multi-phase composites by: (書目-電子資源)

Wood & fire safety 2024proceedings of the 10th International Conference on Wood & Fire Safety 2024 / by: (書目-電子資源)

Creation and accumulation of radiation defects in single crystals of magnesium oxideresearch aims and methodology / by: (書目-電子資源)

Novel aspects of diamond IIscience and technology / by: (書目-電子資源)

New achievements in mechanicsa tribute to Klaus Peter Herrmann / by: (書目-電子資源)

Structural composite materialsfabrication, properties, applications and challenges / by: (書目-電子資源)

Rare earth metals and minerals industriesstatus and prospects / by: (書目-電子資源)

Advanced manufacturing processes Vselected papers from the 5th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2023), September 5-8, 2023, Odessa, Ukraine / by: (書目-電子資源)

Laser powder bed fusion of additive manufacturing technology by: (書目-電子資源)

Selected topics in manufacturingemerging trends from the perspective of AITeM's young researchers / by: (書目-電子資源)

Component surfacesmanufacturing-morphology-property relationships / by: (書目-電子資源)

Superplastic forming/diffusion bonding technology of titanium alloystheories and applications / by: (書目-電子資源)

Practical implementations of additive manufacturing technologies by: (書目-電子資源)

Advances in mechanical engineering and material scienceselect proceedings of ICAMEMS 2023 / by: (書目-電子資源)

Advances in engineering materialsselect proceedings of FLAME 2022 / by: (書目-電子資源)

Advances in materials and agile manufacturingselect proceedings of CPIE 2023 / by: (書目-電子資源)

Advances in additive manufacturingmaterials, processes and applications : selected contributions to the 2nd Advances in Additive Manufacturing Conference (AIAM' 2023), May 18-20, 2023, Hammamet, Tunisia / by: (書目-電子資源)

Fundamentals of metallurgical thermodynamics by: (書目-電子資源)

System lightweight design for aviation by: (書目-電子資源)

Advances in applied mechanicsproceedings of the Eleventh International Congress for Applied Mechanics (JET'2022), November 16-18, 2022, Marrakech, Morocco / by: (書目-電子資源)

Magnetic levitationinnovation of density-based applications / by: (書目-電子資源)

7th International Conference on Structural Adhesive Bonding 2023selected contributions of AB 2023 / by: (書目-電子資源)

Cork-based materials in engineeringdesign and applications for green and sustainable systems / by: (書目-電子資源)

Mechanical testing of materials by: (書目-電子資源)

Electrospun nanofibrous separator for enhancing capacity of lithium-ion batteries by: (書目-電子資源)

Reference materials in measurement and technologyproceedings of the fifth International Scientific Conference RMMT 2022 / by: (書目-電子資源)

Handbook of liquid crystals.Volume I,Foundations and fundamental aspects by: (書目-電子資源)

Intelligent manufacturing and mechatronicsselected articles from iM3F 2023, 7-8 August, Pekan, Malaysia / by: (書目-電子資源)

Proceedings of the 5th International Conference on Metal Material Processes and Manufacturingproceedings of ICMMPM 2023 / by: (書目-電子資源)

Vegetable oil-based compositesprocessing, properties and applications / by: (書目-電子資源)

Thermodynamics of crystalline materialsfrom nano to macro / by: (書目-電子資源)

Friction and wear in metals by: (書目-電子資源)

Ultrafine-grained materials by: (書目-電子資源)

Proceedings of the 3rd International EUROMAGH Conference 2020sustainability and biobased materials on the road of bioeconomy / by: (書目-電子資源)

Creep-fatigue fractureanalysis of internal damage / by: (書目-電子資源)

2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023)smart sustainable materials and technologies.(Volume 1) / by: (書目-電子資源)

2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023)Innovations in Engineering and Smart Sustainable Technologies.(Volume 2) / by: (書目-電子資源)

A pathway to safe, smart, and resilient road and mobility networksthe future of roadways: green, equitable, and integrated / by: (書目-電子資源)

Atomically precise electrocatalysts for electrochemical energy applications by: (書目-電子資源)

Novel defence functional and engineering materials (NDFEM).Volume 2,Engineering materials for defence applications by: (書目-電子資源)

Novel defence functional and engineering materials (NDFEM).Volume 1,Functional materials for defence applications by: (書目-電子資源)

Functional textiles and clothing 2023proceedings of 3rd International Conference on Functional Textiles and Clothing 2023 / by: (書目-電子資源)

Metakaolin-based geopolymersdesign, mechanisms and performance / by: (書目-電子資源)

Advances in manufacturing IV.Volume 4,Measurement and control systems : digitalization, sustainability and industry applications by: (書目-電子資源)

Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).Volume 2,Materials applications, machining, and renewable energy by: (書目-電子資源)

Superhydrophobicity of surfaces dressed by electrospun fibers by: (書目-電子資源)

Theoretical and practical aspects of manufacturing elastomer-metal based vibration dampers by: (書目-電子資源)

Synthesis and device applications of graphene derivatives and quantum dots by: (書目-電子資源)

Proceedings of 2023 the 6th International Conference on Mechanical Engineering and Applied Composite MaterialsMEACM2023 / by: (書目-電子資源)

Recent advances in aerospace engineeringselect proceedings of MRAE 2023 / by: (書目-電子資源)

Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).Volume 3,Sustainable approaches in machine design, life cycle engineering, and energy management for manufacturing processes by: (書目-電子資源)

Advances in material science and engineeringselected articles from ICMMPE 2023, 16-Nov, Putrajaya, Malaysia / by: (書目-電子資源)

The ECPH encyclopedia of mining and metallurgy by: (書目-電子資源)

Advances in design, simulation and manufacturing VIIproceedings of the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2024, June 4-7, 2024, Pilsen, Czech Republic.Volume 2,Mechanical and materials engineering / by: (書目-電子資源)

Advances in manufacturing and materialsselect proceedings of FLUTE 2023 / by: (書目-電子資源)

Advanced welding methods and equipment by: (書目-電子資源)

Innovations in mechanical engineering III by: (書目-電子資源)

Recent advances in materials and manufacturingproceedings of ISME 2023 / by: (書目-電子資源)

Materials sciencetheory and engineering / by: (書目-電子資源)

Engineering design applications VIstructures, materials and processes / by: (書目-電子資源)

The engineer's guide to materialsan applications-focused introduction to materials science / by: (書目-電子資源)

Advanced materials and conversion technologies for personal protective equipment used in the COVID-19 pandemic by: (書目-電子資源)

Advancements in materials processing technology.select proceedings of AMPT 2023 /Volume 1 by: (書目-電子資源)

Sustainable materials and manufacturing techniques in aviation by: (書目-電子資源)

Advances in manufacturing for aerospace alloys by: (書目-電子資源)

Hybrid-energy cutting of aerospace alloys by: (書目-電子資源)

Recent advances in mechanics of functional materials and structuresproceedings of the 8th Asian Conference on Mechanics of Functional Materials and Structures 2022 / by: (書目-電子資源)

Design and modeling of mechanical systems - VIproceedings of the 10th Conference on Design and Modeling of Mechanical Systems, CMSM'2023, December 18-20, 2023, Hammamet, Tunisia.Volume 2,Materials engineering and manufacturing / by: (書目-電子資源)

Rubber based bionanocompositescharacterisation / by: (書目-電子資源)

Nanotechnology in textile finishingadvancements and applications / by: (書目-電子資源)

Advancements in materials processing technology.select proceedings of AMPT 2023 /Volume 2 by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ICMET 2023 / by: (書目-電子資源)

Proceedings of the 10th International Conference on Mechanical, Automotive and Materials EngineeringCMAME 2023, 20-22 December, Da Nang, Vietnam / by: (書目-電子資源)

Recent advances in machines, mechanisms, materials and designselect proceedings of iNaCoMM 2023 / by: (書目-電子資源)

Textile materials for good health and wellbeingdesign and applications / by: (書目-電子資源)

Garment sizing and pattern making by: (書目-電子資源)

Thermoplastic processing of structural metallic materialsexperiments, theory, and modeling / by: (書目-電子資源)

3D printing in spacean illustrated introduction / by: (書目-電子資源)

Hydrophobic ceramic membranes for CO2 captureadvancing clean energy technologies / by: (書目-電子資源)

Materials design and applications V by: (書目-電子資源)

Proceedings of the 1st International Conference on Recent Advancements in Materials Science and Technology.ICRAMST'24, 29-30 January, Coimbatore, India /Volume II by: (書目-電子資源)

Progress in hydrogen energy, fuel cells, nano-biotechnology and advanced, bioactive compounds by: (書目-電子資源)

Sustainable development research in materials and energyadvancement of science and technology / by: (書目-電子資源)

Introduction to electromobilitytechnology, best practice, energy and environment / by: (書目-電子資源)

Biodegradable PBAT plastics and composites by: (書目-電子資源)

Advances in materials and processingproceedings of MET and HTS 2022 / by: (書目-電子資源)

Modeling of Z-pinned carbon fiber-reinforced polymer (CFRP) compositecuring process and mechanical properties / by: (書目-電子資源)

The influence of environment on mechanical characteristics of key semiconductor components by: (書目-電子資源)

Fe-based amorphous alloys with high glass forming ability by: (書目-電子資源)

Magnesium-based hydrogen storage materials by: (書目-電子資源)

Applications of nanomaterials in civil and environmental engineeringtowards sustainable development and environment remediation / by: (書目-電子資源)

Critical infrastructure protectionadvanced technologies for crisis prevention and response / by: (書目-電子資源)

Recent advances on waterborne epoxy coatingssynthesis, properties and applications / by: (書目-電子資源)

Dictionary of concrete technology by: (書目-電子資源)

Advanced compositesapplications for Covid-19 and beyond / by: (書目-電子資源)

Engineering materialsfundamentals, processing and properties / by: (書目-電子資源)

Design load allowables for composite plates exposed to thermomechanical loads by: (書目-電子資源)

Failure in aircraft materials by: (書目-電子資源)

Handbook of non-metallic inclusions in steels by: (書目-電子資源)

Sinter plantsevolution, challenges, and future perspectives / by: (書目-電子資源)

Sustainable development research in materials and renewable energy engineeringadvancements of science and technology / by: (書目-電子資源)

Introduction to electrospinning and nanofiber by: (書目-電子資源)

Development of a self-sufficient, wireless sensor node using the outer FML layer as an antenna by: (書目-電子資源)

Advances in materials engineeringselect proceedings of ICAFAMMT 2024 / by: (書目-電子資源)

Materials processing fundamentals 2025thermodynamics and rate phenomena / by: (書目-電子資源)

Advances in ceramic materials and processing by: (書目-電子資源)

Smart Innovation in Mechanical Engineeringselect proceedings of ICOME 2023, 30-31 August, Bali, Indonesia / by: (書目-電子資源)

Introduction to elasticity, fracture and fatigue by: (書目-電子資源)

Ten materials that shaped our world by: (書目-電子資源)

Electronic materials innovations and reliability in advanced memory packaging by: (書目-電子資源)

Novel materials and technologies for energy and environment applications.select proceedings of NMTE2A 2024 /Volume 1 by: (書目-電子資源)

Advances in nanomaterials for detection, control, and removal of environmental pollutants by: (書目-電子資源)

Physics and mechanics of new materials and their applicationsproceedings of the International Conference PHENMA 2024 / by: (書目-電子資源)

Engineering design applications VII by: (書目-電子資源)

Challenges and innovations in 3D printed bio-organs and their materials by: (書目-電子資源)

Non-destructive methodologies and adapted signal processing techniques in the field of cultural heritage by: (書目-電子資源)

Biomedical applications of microbial nanomaterials by: (書目-電子資源)

Smart fluid technologies by: (書目-電子資源)

Metal science in modern manufacturing technologies by: (書目-電子資源)

Advancements in materials processing technology.select proceedings of AMPT 2023 /Volume 3 by: (書目-電子資源)

Dynamic behavior of materials and mechanics of fracture, fatigue, failure & damage evolution.proceedings of the 2024 Annual Conference on Experimental and Applied Mechanics /Volume 1 by: (書目-電子資源)

Advances in Applied Mechanics IIproceedings of the 12th International Congress for Applied Mechanics (JET'2024), November 13-15, 2024, Marrakech, Morocco / by: (書目-電子資源)

Proceedings of the 6th International Conference on Metal Material Processes and Manufacturing.proceedings of ICMMPM 2024, volume 2 /Volume 2 by: (書目-電子資源)

Proceedings of the 6th International Conference on Metal Material Processes and Manufacturing.proceedings of ICMMPM 2024, volume 1 /Volume 1 by: (書目-電子資源)

Biodegradable metallic materialsdesign, development and characterization / by: (書目-電子資源)

High-performance textile compositescharacteristics and applications / by: (書目-電子資源)

Recent advances in materials and manufacturing scienceselect proceedings of ICRAM 2025 / by: (書目-電子資源)

Advances in materials and manufacturingselect proceedings of ICDMT 2024 / by: (書目-電子資源)

Recent trends in materials and devicesselect proceedings of ICRTMD 2023 / by: (書目-電子資源)

Magnesium-based syntactic, metastable and nano-composites by: (書目-電子資源)

Proceedings of 2025 16th International Conference on Materials and Manufacturing Technologies by: (書目-電子資源)

Selected papers from ICIR EUROINVENT -- 2025International Conference on Innovative Research / by: (書目-電子資源)

Advanced materials and manufacturingselect proceedings of ICEMSMCI 2024 / by: (書目-電子資源)

Proceeding of the 9th International Symposium on Lifeline and Infrastructure Earthquake Engineering by: (書目-電子資源)

Manual of mineral material science by: (書目-電子資源)