Computer-Aided Engineering (CAD, CAE) and Design.

Production Planning in Production Networks :Models for Medium and Short-term Planning / by: (Electronic resources)

Field Models in Electricity and Magnetism by: (Electronic resources)

Systemverilog for verificationa guide to learning the testbench language features / by: (Electronic resources)

Product engineeringtools and methods based on virtual reality / by: (Electronic resources)

Computational Intelligence for Modelling and Prediction by: (Electronic resources)

Classification and Clustering for Knowledge Discovery by: (Electronic resources)

Design for Manufacturability and Yield for Nano-Scale CMOS by: (Electronic resources)

A Practical Introduction to PSL by: (Electronic resources)

Design Computing and Cognition '06 by: (Electronic resources)

Visualization of Digital Terrain and Landscape DataA Manual / by: (Electronic resources)

Innovation in Life Cycle Engineering and Sustainable Development by: (Electronic resources)

Reuse-Based Methodologies and Tools in the Design of Analog and Mixed-Signal Integrated Circuits by: (Electronic resources)

The Structure of Paintings by: (Electronic resources)

Large-Scale Scientific Computing5th International Conference, LSSC 2005, Sozopol, Bulgaria, June 6-10, 2005, Revised Papers / by: (Electronic resources)

Computer Supported Cooperative Work in Design II9th International Conference, CSCWD 2005, Coventry, UK, May 24-26, 2005, Revised Selected Papers / by: (Electronic resources)

Intelligent Computing in Engineering and Architecture13th EG-ICE Workshop 2006, Ascona, Switzerland, June 25-30, 2006, Revised Selected Papers / by: (Electronic resources)

Embedded System Design by: (Electronic resources)

CMOS Active Inductors and TransformersPrinciple, Implementation, and Applications / by: (Electronic resources)

Systems Modeling and Simulation: Theory and ApplicationsThird Asian Simulation Conference, AsiaSim 2004, Jeju Island, Korea, October 4-6, 2004, Revised Selected Papers / by: (Electronic resources)

Holonic and Multi-Agent Systems for ManufacturingSecond International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2005, Copenhagen, Denmark, August 22-24, 2005, Proceedings / by: (Electronic resources)

Evolvable Systems :From Biology to Hardware: 6th International Conference, ICES 2005, Sitges, Spain, September 12-14, 2005, Proceedings by: (Electronic resources)

Computer Aided Systems Theory - EUROCAST 2005 :10th International Conference on Computer Aided Systems Theory, Las Palmas de Gran Canaria, Spain, February 7-11, 2005, Revised Selected Papers by: (書目-電子資源)

Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation :15th International Workshop, PATMOS 2005, Leuven, Belgium, September 21-23, 2005, Proceedings by: (書目-電子資源)

Correct Hardware Design and Verification Methods :13th IFIP WG 10.5Advanced Research, Working Conference, CHARME 2005, Saarbrucken, Germany, October 3-6, 2005, Proceedings by: (書目-電子資源)

Computer Supported Cooperative Work in Design I :8th International Conference, CSCWD 2004, Xiamen, China, May 26-28, 2004. Revised Selected Papers by: (書目-電子資源)

Computer-Aided Innovation (CAI)IFIP 20th World Computer Congress, Proceedings of the Second Topical Session on Computer-Aided Innovation, WG 5.4/TC 5 Computer-Aided Innovation, September 7-10, 2008, Milano, Italy / by: (書目-電子資源)

Introduction to Geometric Computing by: (書目-電子資源)

Smart Graphics9th International Symposium, SG 2008, Rennes, France, August 27-29, 2008. Proceedings / by: (書目-電子資源)

Global Design to Gain a Competitive EdgeAn Holistic and Collaborative Design Approach based on Computational Tools / by: (書目-電子資源)

Advanced Design and Manufacture to Gain a Competitive EdgeNew Manufacturing Techniques and their Role in Improving Enterprise Performance / by: (書目-電子資源)

Evolvable systemsfrom biology to hardware: 8th International Conference, ICES 2008, Prague, Czech Republic, September 21-24, 2008. Proceedings / by: (書目-語言資料,印刷品)

Feature ExtractionFoundations and Applications / by: (書目-語言資料,印刷品)

Computer supported cooperative work in design IV11th international conference, CSCWD 2007, Melbourne, Australia, April 26-28, 2007. revised selected papers / by: (書目-語言資料,印刷品)

Large-scale scientific computing6th international conference, LSSC 2007, Sozopol, Bulgaria, June 5-9, 2007 : revised papers / by: (書目-語言資料,印刷品)

Writing mental ray shadersA Perceptual Introduction / by: (書目-語言資料,印刷品)

The language of designtheory and computation / by: (書目-電子資源)

Timing optimization through clock skew scheduling by: (書目-電子資源)

Management of knowledge imperfection in building intelligent systems by: (書目-電子資源)

Mixed reality in architecture, design and construction by: (書目-電子資源)

Functional design errors in digital circuitsdiagnosis, correction and repair / by: (書目-電子資源)

Introduction to embedded system design using field programmable gate arrays by: (書目-電子資源)

Hardware software co-design of a multimedia SOC platform / by: (書目-電子資源)

Collaborative design and planning for digital manufacturing by: (書目-電子資源)

Geometric algebra with applications in engineering by: (書目-電子資源)

Model predictive control system design and implementation using MATLAB by: (書目-電子資源)

Carbon nanotube electronics by: (書目-電子資源)

Static timing analysis for nanometer designsa practical approach / by: (書目-電子資源)

Motivated reinforcement learningcurious characters for multiuser games / by: (書目-電子資源)

Complex sciencesFirst International Conference, Complex 2009, Shanghai, China, February 23-25, 2009 : revised papers, part 1 / by: (書目-電子資源)

Nanosystems design and technology by: (書目-電子資源)

DRM, a design research methodology by: (書目-電子資源)

Computational science and its appilcations, ICCSA 2009international conference, Seoul, Korea, June 29-July 2, 2009 : Proceedings.Part I / by: (書目-電子資源)

Computational science and its appilcations, ICCSA 2009international conference, Seoul, Korea, June 29-July 2, 2009 : proceedings.Part II / by: (書目-電子資源)

Spotlight on modern transformer design by: (書目-電子資源)

Growth and development of computer aided innovationthird IFIP WG 5.4 working conference, CAI 2009, Harbin, China, August 20-21, 2009 : proceedings / by: (書目-電子資源)

Holonic and multi-agent systems for manufacturing4th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2009, Linz, Austria, August 31 - September 2, 2009 : proceedings / by: (書目-電子資源)

Research and Education in Robotics - EUROBOT 2008International Conference, Heidelberg, Germany, May 22-24, 2008 : revised selected papers / by: (書目-電子資源)

Analysis, architectures and modelling of embedded systemsThird IFIP TC 10 International Embedded Systems Symposium, IESS 2009, Langenargen, Germany, September 14-16, 2009 : Proceedings / by: (書目-電子資源)

Advanced design and manufacturing based on STEP by: (書目-電子資源)

Computer aided systems theory - EUROCAST 200912th international conference, Las Palmas de Gran Canaria, Spain, February 15-20, 2009 : revised selected papers / by: (書目-電子資源)

Control and automationinternational conference, CA 2009. Held as part of the Future Generation Information Technology Conference, CA 2009, Jeju Island, Korea, December 10-12, 2009 : Proceedings / by: (書目-電子資源)

C compilers for ASIPsautomatic compiler generation with LISA / by: (書目-電子資源)

ESL models and their applicationelectronic system level design and verification in practice / by: (書目-電子資源)

Fault location on power networks by: (書目-電子資源)

OntoCAPEa re-usable ontology for chemical process engineering / by: (書目-電子資源)

Dynamic modelling for supply chain managementdealing with front-end, back-end and integration issues / by: (書目-電子資源)

Embedded software design and programming of multiprocessor system-on-chipSimulink and System C Case Studies / by: (書目-電子資源)

Manufacturing simulation with plant simulation and simtalkusage and programming with examples and solutions / by: (書目-電子資源)

Nanometer technology designshigh-quality delay tests / by: (書目-電子資源)

Computer-aided design of user interfaces VIproceedings of the Seventh International Conference on Computer-Aided Design of User Interfaces (CADUI 2008) / by: (書目-電子資源)

Clocking in modern VLSI systems by: (書目-電子資源)

Computational surface and roundness metrology by: (書目-電子資源)

Structural analysis with the finite element method.linear statics /Volume 1,Basis and solids by: (書目-電子資源)

Open verification methodology cookbook by: (書目-電子資源)

Embedded system designmodeling, synthesis and verification / by: (書目-電子資源)

Geometric algebra computingin engineering and computer science / by: (書目-電子資源)

Advanced manufacturing and sustainable logistics8th International Heinz Nixdorf Symposium, IHNS 2010, Paderborn, Germany, April 21-22, 2010 : proceedings / by: (書目-電子資源)

Large-scale scientific computing7th International Conference, LSSC 2009, Sozopol, Bulgaria, June 4-8, 2009 : revised papers / by: (書目-電子資源)

Mathematical methods for curves and surfaces7th International Conference, MMCS 2008, Tonsberg, Norway, June 26-July 1, 2008 : revised selected papers / by: (書目-電子資源)

Security in embedded devices by: (書目-電子資源)

Simulation methods for reliability and availability of complex systems by: (書目-電子資源)

Designing inclusive interactionsinclusive interactions between people and products in their contexts of use / by: (書目-電子資源)

System design optimization for product manufacturing by: (書目-電子資源)

Power-efficient system design by: (書目-電子資源)

Scalable techniques for formal verification by: (書目-電子資源)

Design and verification of microprocessor systems for high-assurance applications by: (書目-電子資源)

Analysis and design of resilient VLSI circuitsmitigating soft errors and process variations / by: (書目-電子資源)

Advanced test methods for SRAMseffective solutions for dynamic fault detection in nanoscaled technologies / by: (書目-電子資源)

Designing embedded systems with the SIGNAL programming languagesynchronous, reactive specification / by: (書目-電子資源)

Hardware acceleration of EDA algorithmscustom ICs, FPGAs and GPUs / by: (書目-電子資源)

On and off-chip crosstalk avoidance in VLSI design by: (書目-電子資源)

Minimizing and exploiting leakage in VLSI design by: (書目-電子資源)

VLSI design for video codingH.264/AVC encoding from standard specification to chip / by: (書目-電子資源)

Power-aware testing and test strategies for low power devices by: (書目-電子資源)

SystemCfrom the ground up / by: (書目-電子資源)

Structural optimization with uncertainties by: (書目-電子資源)

Shape interrogation for computer aided design and manufacturing by: (書目-電子資源)

Composing software componentsa software-testing perspective / by: (書目-電子資源)

FPGA designbest practices for team-based design / by: (書目-電子資源)

Low power hardware synthesis from concurrent action-oriented specifications by: (書目-電子資源)

Synthesis of embedded softwareframeworks and methodologies for correctness by construction / by: (書目-電子資源)

E-maintenance by: (書目-電子資源)

Analysis and design of univariate subdivision schemes by: (書目-電子資源)

Extreme low-power mixed signal IC designsubthreshold source-coupled circuits / by: (書目-電子資源)

Software automatic tuningfrom concepts to state-of-the-art results / by: (書目-電子資源)

A practical introduction to hardware/software codesign by: (書目-電子資源)

Processor and system-on-chip simulation by: (書目-電子資源)

Playing with the past by: (書目-電子資源)

Analog layout synthesisa survey of topological approaches / by: (書目-電子資源)

Low power networks-on-chip by: (書目-電子資源)

Reliability of nanoscale circuits and systemsmethodologies and circuit architectures / by: (書目-電子資源)

CMOS circuits for passive wireless microsystems by: (書目-電子資源)

Ultra low-power integrated circuit design for wireless neural interfaces by: (書目-電子資源)

Low-power high-resolution analog to digital convertersdesign, test and calibration / by: (書目-電子資源)

On-chip interconnect with aelitecomposable and predictable systems / by: (書目-電子資源)

Energy harvesting systemsprinciples, modeling and applications / by: (書目-電子資源)

Design creativity 2010 by: (書目-電子資源)

Dependability in electronic systemsmitigation of hardware failures, soft errors, and electro-magnetic disturbances / by: (書目-電子資源)

Reconfigurable field programmable gate arrays for mission-critical applications by: (書目-電子資源)

Cloud connectivity and embedded sensory systems by: (書目-電子資源)

Low-power variation-tolerant design in nanometer silicon by: (書目-電子資源)

Ultra-thin chip technology and applications by: (書目-電子資源)

Post-silicon and runtime verification for modern processors by: (書目-電子資源)

Advanced techniques in logic synthesis, optimizations and applications by: (書目-電子資源)

Multiprocessor system-on-chiphardware design and tool integration / by: (書目-電子資源)

Design of image processing embedded systems using multidimensional data flow by: (書目-電子資源)

Run-time adaptation for reconfigurable embedded processors by: (書目-電子資源)

Voltage regulators for next generation microprocessors by: (書目-電子資源)

On-chip instrumentationdesign and debug for systems on chip / by: (書目-電子資源)

Introduction to mixed-signal, embedded design by: (書目-電子資源)

Wearable monitoring systems by: (書目-電子資源)

Numerical methods and applications7th international conference, NMA 2010, Borovets, Bulgaria, August 20-24, 2010 : revised papers / by: (書目-電子資源)

VLSI physical designfrom graph partitioning to timing closure / by: (書目-電子資源)

Nanoscale memory repair by: (書目-電子資源)

Rapid one-of-a-kind product developmentstrategies, algorithms and tools / by: (書目-電子資源)

Design computing and cognition '10 by: (書目-電子資源)

Focal-plane sensor-processor chips by: (書目-電子資源)

Memory-based logic synthesis by: (書目-電子資源)

Mixed reality and human-robot interaction by: (書目-電子資源)

Evolutionary optimizationthe [mu]GP toolkit / by: (書目-電子資源)

Collaborative design in virtual environments by: (書目-電子資源)

Regular nanofabrics in emerging technologiesdesign and fabrication methods for nanoscale digital circuits / by: (書目-電子資源)

The future of design methodology by: (書目-電子資源)

Solid modelling and CAD systemshow to survive a CAD system / by: (書目-電子資源)

Principles of VLSI RTL designa practical guide / by: (書目-電子資源)

Global product developmentproceedings of the 20th CIRP Design Conference, Ecole Centrale de Nantes, Nantes, France, 19th-21st April 2010 / by: (書目-電子資源)

The simple art of SoC designclosing the gap between RTL and ESL / by: (書目-電子資源)

High-level verificationmethods and tools for verification of system-level designs / by: (書目-電子資源)

Design and analysis of biomolecular circuitsengineering approaches to systems and synthetic biology / by: (書目-電子資源)

Advances on modeling in tissue engineering by: (書目-電子資源)

Advances in self-organizing maps8th international workshop, WSOM 2011, Espoo, Finland, June 13-15, 2011 : proceedings / by: (書目-電子資源)

Building innovation pipelines through computer-aided innovation4th IFIP WG 5.4 Working Conference, CAI 2011, Strasbourg, France, June 30 - July 1, 2011. Proceedings / by: (書目-電子資源)

Distributed large-scale dimensional metrologynew insights / by: (書目-電子資源)

Programming many-core chips by: (書目-電子資源)

Nano-electronic devicessemiclassical and quantum transport modeling / by: (書目-電子資源)

Ontologies in urban development projects by: (書目-電子資源)

Complexity metrics in engineering designmanaging the structure of design processes / by: (書目-電子資源)

Computational techniques for structural health monitoring by: (書目-電子資源)

Guide to geometric algebra in practice by: (書目-電子資源)

Holonic and multi-agent systems for manufacturing5th international conference on industrial applications of holonic and multi-agent systems, HoloMAS 2011, Toulouse, France, August 29-31, 2011 : proceedings / by: (書目-電子資源)

Innovation in product designfrom CAD to virtual prototyping / by: (書目-電子資源)

Formal development of a network-centric RTOSsoftware engineering for reliable embedded systems / by: (書目-電子資源)

Multi-objective design space exploration of multiprocessor SoC architecturesthe MULTICUBE Approach / by: (書目-電子資源)

Reconfigurable computingfrom FPGAs to hardware/software codesign / by: (書目-電子資源)

Information modeling for interoperable dimensional metrology by: (書目-電子資源)

Digitally-assisted analog and RF CMOS circuit design for software-defined radio by: (書目-電子資源)

Cartesian genetic programming by: (書目-電子資源)

Multi-objective evolutionary optimisation for product design and manufacturing by: (書目-電子資源)

Euclidean shortest pathsexact or approximate algorithms / by: (書目-電子資源)

Computer vision and action recognitiona guide for image processing and computer vision community for action understanding / by: (書目-電子資源)

3D TCAD simulation for semiconductor processes, devices and optoelectronics by: (書目-電子資源)

Reliability, availability and serviceability of networks-on-chip by: (書目-電子資源)

Enabling manufacturing competitiveness and economic sustainabilityproceedings of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011), Montreal, Canada, 2-5 October 2011 / by: (書目-電子資源)

Low power design with high-level power estimation and power-aware synthesis by: (書目-電子資源)

Error control for network-on-chip links by: (書目-電子資源)

Fundamentals of digital manufacturing science by: (書目-電子資源)

The MPEG representation of digital media by: (書目-電子資源)

Scalable multi-core architecturesdesign methodologies and tools / by: (書目-電子資源)

Process variations and probabilistic integrated circuit design by: (書目-電子資源)

Curves and surfaces7th International Conference, Avignon, France, June 24 - 30, 2010 : revised selected papers / by: (書目-電子資源)

Virtual reality and animation for MATLAB and Simulink usersvisualization of dynamic models and control simulations / by: (書目-電子資源)

Computer-aided nonlinear control system designusing describing function models / by: (書目-電子資源)

Understanding and using the controller area network communication protocoltheory and practice / by: (書目-電子資源)

High performance fiber reinforced cement composites 6HPFRCC 6 / by: (書目-電子資源)

Computer aided systems theory - EUROCAST 201113th International Conference, Las Palmas de Gran Canaria, Spain, February 6-11, 2011 : revised selected papers.Part I / by: (書目-電子資源)

Computer aided systems theory - EUROCAST 201113th International Conference, Las Palmas de Gran Canaria, Spain, February 6-11, 2011 : revised selected papers.Part II / by: (書目-電子資源)

Distributed, embedded and real-time Java systems by: (書目-電子資源)

SystemVerilog for verificationa guide to learning the testbench language features / by: (書目-電子資源)

Designing inclusive systemsdesigning inclusion for real-world applications / by: (書目-電子資源)

Statistical performance analysis and modeling techniques for nanometer VLSI designs by: (書目-電子資源)

All-embracing manufacturingroadmap system / by: (書目-電子資源)

Computer aided surgery7th Asian Conference on Computer Aided Surgery, Bangkok, Thailand, August 2011 : proceedings / by: (書目-電子資源)

Heterogeneous multicore processor technologies for embedded systems by: (書目-電子資源)

Similarity and modeling in science and engineering by: (書目-電子資源)

Guide to computational geometry processingfoundations, algorithms, and methods / by: (書目-電子資源)

Large-scale scientific computing8th International Conference, LSSC 2011, Sozopol, Bulgaria, June 6-10, 2011, Revised selected papers / by: (書目-電子資源)

Production systems and supply chain management in emerging countriesbest practices : selected papers from the International Conference on Production Research (ICPR) / by: (書目-電子資源)

Automated configuration problem solving by: (書目-電子資源)

Cooperative design, visualization, and engineering9th International Conference, CDVE 2012, Osaka, Japan, September 2-5, 2012 : proceedings / by: (書目-電子資源)

Analytical methods in anisotropic elasticitywith symbolic computational tools / by: (書目-電子資源)

Practical aspects of design scienceEuropean Design Science Symposium, EDSS 2011, Leixlip, Ireland, October 14, 2011 : revised selected papers / by: (書目-電子資源)

Computer-aided design in power engineeringapplication of software tools / by: (書目-電子資源)

Design computing and cognition '08proceedings of the third International Conference on Design Computing and Cognition / by: (書目-電子資源)

Line drawing interpretation by: (書目-電子資源)

Standardized functional verification by: (書目-電子資源)

Subdivision surfaces by: (書目-電子資源)

Biologically inspired designcomputational methods and tools / by: (書目-電子資源)

The proper generalized decomposition for advanced numerical simulationsa primer / by: (書目-電子資源)

MEMS product engineeringhandling the diversity of an emerging technology. Best Practices for Cooperative Development / by: (書目-電子資源)

Mathematical methods for curves and surfaces8th International Conference, MMCS 2012, Oslo, Norway, June 28 - July 3, 2012 : revised selected papers / by: (書目-電子資源)

Digital mediaa problem-solving approach for computer graphics / by: (書目-電子資源)

Inclusive designingjoining usability, accessibility, and inclusion / by: (書目-電子資源)

CIRP encyclopedia of production engineering by: (書目-電子資源)

Advanced field-solver techniques for RC extraction of integrated circuits by: (書目-電子資源)

Multiphysics simulationelectromechanical system applications and optimization / by: (書目-電子資源)

Optimization in science and engineeringin honor of the 60th birthday of Panos M. Pardalos / by: (書目-電子資源)

Cloud-based design and manufacturing (CBDM)a service-oriented product development paradigm for the 21st Century / by: (書目-電子資源)

The non-equilibrium Green's function method for nanoscale device simulation by: (書目-電子資源)

Advances in production management systemsinnovative and knowledge-based production management in a global-local world : IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014 : proceedings.Part III / by: (書目-電子資源)

Advances in production management systemsinnovative and knowledge-based production management in a global-local world : IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014 : proceedings.Part II / by: (書目-電子資源)

Advances in production management systemsinnovative and knowledge-based production management in a global-local world : IFIP WG 5.7 International Conference, APMS 2014, Ajaccio, France, September 20-24, 2014 : proceedings.Part I / by: (書目-電子資源)

Cooperative design, visualization, and engineering11th International Conference, CDVE 2014, Seattle, WA, USA, September 14-17, 2014 : proceedings / by: (書目-語言資料,印刷品)

Separated representations and PGD-based model reductionfundamentals and applications / by: (書目-語言資料,印刷品)

Design computing and cognition '12 by: (書目-語言資料,印刷品)

Exercises in computational mathematics with MATLAB by: (書目-語言資料,印刷品)

SAGA - advances in shApes, geometry, and algebraresults from the Marie Curie Initial Training Network / by: (書目-電子資源)

Home energy informationmeasuring and managing energy consumption in residential buildings / by: (書目-電子資源)

Progress in differential-algebraic equationsDeskriptor 2013 / by: (書目-電子資源)

Product lifecycle management for a global market11th IFIP WG 5.1 International Conference, PLM 2014, Yokohama, Japan, July 7-9, 2014 : revised selected papers / by: (書目-電子資源)

Space modeling with SolidWorks and NX by: (書目-電子資源)

CAD, 3D modeling, engineering analysis, and prototype experimentationindustrial and research applications / by: (書目-電子資源)

Configurable intelligent optimization algorithmdesign and practice in manufacturing / by: (書目-電子資源)

Perfecting engineering and technical drawingreducing errors and misinterpretations / by: (書目-電子資源)

Circuit design for reliability by: (書目-電子資源)

Studying visual and spatial reasoning for design creativity by: (書目-電子資源)

Advanced customization in architectural design and construction by: (書目-電子資源)

Advances in architectural geometry 2014 by: (書目-電子資源)

Numerical methods and applications8th International Conference, NMA 2014, Borovets, Bulgaria, August 20-24, 2014 : revised selected papers / by: (書目-電子資源)

The finite element method and applications in engineering using ANSYS by: (書目-電子資源)

AIDA-CMKmulti-algorithm optimization kernel applied to analog IC sizing / by: (書目-電子資源)

Design computing and cognition '14 by: (書目-電子資源)

Identifying product and process state drivers in manufacturing systems using supervised machine learning by: (書目-電子資源)

New challenges in grid generation and adaptivity for scientific computing by: (書目-電子資源)

Computer-aided architectural design futuresthe next city - new technologies and the future of the built environment : 16th International Conference, CAAD Futures 2015, Sao Paulo, Brazil, July 8-10, 2015 : selected papers / by: (書目-電子資源)

Applications of computational tools in biosciences and medical engineering by: (書目-電子資源)

Mathematical progress in expressive image synthesis IIextended and selected results from the Symposium MEIS2014 / by: (書目-電子資源)

Countdown to a moon launchpreparing Apollo for its historic journey / by: (書目-電子資源)

Advances in production management systemsinnovative production management towards sustainable growth : IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015 : proceedings.Part I / by: (書目-電子資源)

Advances in production management systemsinnovative production management towards sustainable growth : IFIP WG 5.7 International Conference, APMS 2015, Tokyo, Japan, September 7-9, 2015 : proceedings.Part II / by: (書目-電子資源)

Curves and surfaces8th International Conference, Paris, France, June 12-18, 2014 : revised selected papers / by: (書目-電子資源)

Creativity in intelligent technologies and data sciencefirst conference, CIT&DS 2015, Volgograd, Russia, September 15-17, 2015 : proceedings / by: (書目-電子資源)

VLSI-SoCat the crossroads of emerging trends : 21st IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2013, Istanbul, Turkey, October 6-9, 2013 : revised and extended selected papers / by: (書目-電子資源)

VLSI-SoC: internet of things foundations22nd IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2014, Playa del Carmen, Mexico, October 6-8, 2014 : revised and extended selected papers / by: (書目-電子資源)

Cooperative design, visualization, and engineering12th International Conference, CDVE 2015, Mallorca, Spain, September 20-23, 2015 : proceedings / by: (書目-電子資源)

Modelling behaviourdesign modelling symposium 2015 / by: (書目-電子資源)

Analyzing and modeling interdisciplinary product developmenta framework for the analysis of knowledge characteristics and design support / by: (書目-電子資源)

Computer aided systems theory - EUROCAST 201515th International Conference, Las Palmas de Gran Canaria, Spain, February 8-13, 2015 : revised selected papers / by: (書目-電子資源)

Isogeometric analysis and applications 2014 by: (書目-電子資源)

Mechatronics by bond graphsan object-oriented approach to modelling and simulation / by: (書目-電子資源)

Parallelism in matrix computations by: (書目-電子資源)

Problem solving in foundation engineering using foundationPro by: (書目-電子資源)

Solid modeling and applicationsrapid prototyping, CAD and CAE theory / by: (書目-電子資源)

Teaching learning based optimization algorithmand its engineering applications / by: (書目-電子資源)

Computer aided virtual manufacturing using Creo parametriceasy to learn step by step guide / by: (書目-電子資源)

Power amplifiers for the S-, C-, X- and Ku-bandsan EDA perspective / by: (書目-電子資源)

Basic principles of concrete structures by: (書目-電子資源)

Parabolic trough collector prototypes for low-temperature process heat by: (書目-電子資源)

Intelligent computer systems in engineering designprinciples and applications / by: (書目-電子資源)

CAD/CAM, Robotics and Factories of the FutureProceedings of the 28th International Conference on CARs & FoF 2016 / by: (書目-電子資源)

Designing around peopleCWUAAT 2016 / by: (書目-電子資源)

Proceedings of International Conference on ICT for Sustainable DevelopmentICT4SD 2015 Volume 1 / by: (書目-電子資源)

Proceedings of International Conference on ICT for Sustainable DevelopmentICT4SD 2015. Volume 2 / by: (書目-電子資源)

The finite element analysis program MSC Marc/Mentata first introduction / by: (書目-電子資源)

Product lifecycle management in the era of internet of things12th IFIP WG 5.1 International Conference, PLM 2015, Doha, Qatar, October 19-21, 2015 : revised selected papers / by: (書目-電子資源)

Engineering graphicstheoretical foundations of engineering geometry for design / by: (書目-電子資源)

Experimental design researchapproaches, perspectives, applications / by: (書目-電子資源)

Mathematical progress in expressive image synthesis IIIselected and extended results from the symposium MEIS2015 / by: (書目-電子資源)

Scientific computing in electrical engineeringSCEE 2014, Wuppertal, Germany, July 2014 / by: (書目-電子資源)

A far-infrared spectro-spatial space interferometerinstrument simulator and testbed implementation / by: (書目-電子資源)

3D printed science projectsideas for your classroom, science fair, or home / by: (書目-電子資源)

Introduction to nonlinear thermomechanics of solids by: (書目-電子資源)

Model design and simulation analysis15th International Conference, AsiaSim 2015, Jeju, Korea, November 4-7, 2015 : revised selected papers / by: (書目-電子資源)

Discrete optimization in architecturearchitectural & urban layout / by: (書目-電子資源)

VLSI-SoCdesign for reliability, security, and low power : 23rd IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2015, Daejeon, Korea, October 5-7, 2015 : revised selected papers / by: (書目-電子資源)

Advances in production management systemsinitiatives for a sustainable world : IFIP WG 5.7 International Conference, APMS 2016, Iguassu Falls, Brazil, September 3-7, 2016 : revised selected papers / by: (書目-電子資源)

Product lifecycle management for digital transformation of industries13th IFIP WG 5.1 International Conference, PLM 2016, Columbia, SC, USA, July 11-13, 2016 : revised selected papers / by: (書目-電子資源)

Discrete optimization in architectureextremely modular systems / by: (書目-電子資源)

Advances in 3D printing & additive manufacturing technologies by: (書目-電子資源)

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems.proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /Volume 9 by: (書目-電子資源)

Advances on mechanics, design engineering and manufacturingproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), 14-16 September, 2016, Catania, Italy / by: (書目-電子資源)

Discrete optimization in architecturebuilding envelope / by: (書目-電子資源)

Proceedings of the 7th International Conference on Discrete Element Methods by: (書目-電子資源)

Advanced finite element simulation with MSC Marcapplication of user subroutines / by: (書目-電子資源)

Tactile display for virtual 3D shape rendering by: (書目-電子資源)

Complexity management in engineering design - a primer by: (書目-電子資源)

Designing with computational intelligence by: (書目-電子資源)

Proceedings of the 13th International Scientific ConferenceComputer Aided Engineering / by: (書目-電子資源)

Augmented realitywhere we will all live / by: (書目-電子資源)

Design theorymethods and organization for innovation / by: (書目-電子資源)

Fire safety of historical buildingstraditional versus innovative "behavioural design" solutions by using wayfinding systems / by: (書目-電子資源)

Meshfree methods for partial differential equations VIII by: (書目-電子資源)

Computer-aided architectural designfuture trajectories : 17th International Conference, CAAD Futures 2017, Istanbul, Turkey, July 12-14, 2017 : selected papers / by: (書目-電子資源)

Tests and proofs11th International Conference, TAP 2017, held as part of STAF 2017, Marburg, Germany, July 19-20, 2017 : proceedings / by: (書目-電子資源)

System reduction for nanoscale IC design by: (書目-電子資源)

Advances in modeling and simulationseminal research from 50 years of winter simulation conferences / by: (書目-電子資源)

Advances in production management systemsthe path to intelligent, collaborative and sustainable manufacturing : IFIP WG 5.7 International Conference, APMS 2017, Hamburg, Germany, September 3-7, 2017 : proceedings.Part I / by: (書目-電子資源)

Advances in production management systemsthe path to intelligent, collaborative and sustainable manufacturing : IFIP WG 5.7 International Conference, APMS 2017, Hamburg, Germany, September 3-7, 2017 : proceedings.Part II / by: (書目-電子資源)

VLSI-SoCsystem-on-chip in the nanoscale era - design, verification and reliability : 24th IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2016, Tallinn, Estonia, September 26-28, 2016 : revised selected papers / by: (書目-電子資源)

New activities for cultural heritageproceedings of the International Conference HeritageBot 2017 / by: (書目-電子資源)

Computer graphics for Java programmers by: (書目-電子資源)

Subdivision surface modeling technology by: (書目-電子資源)

Mathematical methods for curves and surfaces9th International Conference, MMCS 2016, Tonsberg, Norway, June 23-28, 2016 : revised selected papers / by: (書目-電子資源)

Learn Autodesk Inventor 2018 basics3D modeling, 2D graphics, and assembly design / by: (書目-電子資源)

Product lifecycle management and the industry of the future14th IFIP WG 5.1 International Conference, PLM 2017, Seville, Spain, July 10-12, 2017 : revised selected papers / by: (書目-電子資源)

Framelets and waveletsalgorithms, analysis, and applications / by: (書目-電子資源)

Advances in ergonomics of manufacturingmanaging the enterprise of the future : proceedings of the AHFE 2017 International Conference on Human Aspects of Advanced Manufacturing, July 17-21, 2017, The Westin Bonaventure Hotel, Los Angeles, California, USA / by: (書目-電子資源)

Advanced gear engineering by: (書目-電子資源)

A first course in engineering drawing by: (書目-電子資源)

Design of structural elements with tropical hardwoods by: (書目-電子資源)

Industry 4.0managing the digital transformation / by: (書目-電子資源)

Computational ship design by: (書目-電子資源)

Masters of the structural aesthetic by: (書目-電子資源)

Humanizing digital realityDesign Modelling Symposium Paris 2017 / by: (書目-電子資源)

Computational morphologiesdesign rules between organic models and responsive architecture / by: (書目-電子資源)

Advances in manufacturing by: (書目-電子資源)

MES compendiumperfect MES solutions based on HYDRA / by: (書目-電子資源)

Millimeter-wave low noise amplifiers by: (書目-電子資源)

A first introduction to the finite element analysis program MSC Marc/Mentat by: (書目-電子資源)

Information and communication technology for sustainable developmentproceedings of ICT4SD 2016.Volume 2 / by: (書目-電子資源)

Information and communication technology for sustainable developmentproceedings of ICT4SD 2016.Volume 1 / by: (書目-電子資源)

Engineering applications for new materials and technologies by: (書目-電子資源)

FEM analysis of the human knee jointa review / by: (書目-電子資源)

Urban wind environmentIntegrated Climate-Sensitive Planning and Design / by: (書目-電子資源)

Solid modeling and applicationsrapid prototyping, CAD and CAE theory / by: (書目-電子資源)

Reduced-order modeling (ROM) for simulation and optimizationpowerful algorithms as key enablers for scientific computing / by: (書目-電子資源)

Scientific computing in electrical engineeringSCEE 2016, St. Wolfgang, Austria, October 2016 / by: (書目-電子資源)

Advances in production management systemsproduction management for data-driven, intelligent, collaborative, and sustainable manufacturing : IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018 : proceedings.Part I / by: (書目-電子資源)

Advances in production management systemsproduction management for data-driven, intelligent, collaborative, and sustainable manufacturing : IFIP WG 5.7 International Conference, APMS 2018, Seoul, Korea, August 26-30, 2018 : proceedings.Part II / by: (書目-電子資源)

Building information modelingtechnology foundations and industry practice / by: (書目-電子資源)

Mastering 3D printing in the classroom, library, and lab by: (書目-電子資源)

Domain decomposition methods in science and engineering XXIV by: (書目-電子資源)

Graphic imprintsthe influence of representation and ideation tools in architecture / by: (書目-電子資源)

Advances in design, simulation and manufacturingproceedings of the International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2018, June 12-15, 2018, Sumy, Ukraine / by: (書目-電子資源)

Advances in ergonomics in designproceedings of the AHFE 2018 International Conference on Ergonomics in Design, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA / by: (書目-電子資源)

Advances in manufacturing, production management and process controljoint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA / by: (書目-電子資源)

Advances in interdisciplinary practice in industrial designproceedings of the AHFE 2018 International Conference on Interdisciplinary Practice in Industrial Design, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA / by: (書目-電子資源)

Sustainable manufacturing and remanufacturing managementprocess planning, optimization and spplications / by: (書目-語言資料,印刷品)

Computational and manufacturing strategiesexperimental expressions of wood capabilities / by: (書目-電子資源)

3D visual content creation, coding and delivery by: (書目-電子資源)

ICGG 2018 - proceedings of the 18th International Conference on Geometry and Graphics40th Anniversary - Milan, Italy, August 3-7, 2018 / by: (書目-電子資源)

Dense and green building typologiesresearch, policy and practice perspectives / by: (書目-電子資源)

Combinatorial optimization problems in planning and decision makingtheory and applications / by: (書目-電子資源)

Advances in informatics and computing in civil and construction engineeringproceedings of the 35th CIB W78 2018 Conference : IT in Design, Construction, and Management / by: (書目-電子資源)

Advanced CAD modelingexplicit, parametric, free-form CAD and re-engineering / by: (書目-電子資源)

Transdisciplinary multispectral modeling and cooperation for the preservation of cultural heritagefirst International Conference, TMM_CH 2018, Athens, Greece, October 10-13, 2018 : revised selected papers.Part II / by: (書目-電子資源)

Transdisciplinary multispectral modeling and cooperation for the preservation of cultural heritagefirst International Conference, TMM_CH 2018, Athens, Greece, October 10-13, 2018 : revised selected papers.Part I / by: (書目-電子資源)

Digital wood designinnovative techniques of representation in architectural design / by: (書目-電子資源)

Manufacturing engineeringselect proceedings of CPIE 2018 / by: (書目-電子資源)

Proceedings of the 14th International Scientific Conferencecomputer aided engineering / by: (書目-電子資源)

Landscape labdrawing, perception and design for the next landscape models / by: (書目-電子資源)

Methods for solving complex problems in fluids engineering by: (書目-電子資源)

OpenFOAMselected papers of the 11th Workshop / by: (書目-電子資源)

A holistic approach to ship design.Volume 1,Optimisation of ship design and operation for life cycle by: (書目-電子資源)

Computer vision and audition in urban analysis using the remorph framework by: (書目-電子資源)

Advances in manufacturing II.Volume 1,Solutions for industry 4.0 by: (書目-電子資源)

Advances in manufacturing II.Volume 2,Production engineering and management by: (書目-電子資源)

Advances in engineering designselect proceedings of FLAME 2018 / by: (書目-電子資源)

Summer of simulation50 years of seminal computer simulation research / by: (書目-電子資源)

Industry 4.0developments towards the fourth Industrial Revolution / by: (書目-電子資源)

Backward fuzzy rule interpolation by: (書目-電子資源)

27th International Meshing Roundtable by: (書目-電子資源)

The Internet of Things in the industrial sectorsecurity and device connectivity, smart environments, and industry 4.0 / by: (書目-電子資源)

Dense and green building typologiesdesign perspectives / by: (書目-電子資源)

Ray tracinga tool for all / by: (書目-電子資源)

Advanced methods for geometric modeling and numerical simulation by: (書目-電子資源)

Si detectors and characterization for HEP and photon science experimenthow to design detectors by TCAD simulation / by: (書目-電子資源)

Advances in computational methods in manufacturingselect papers from ICCMM 2019 / by: (書目-電子資源)

Data mining in structural dynamic analysisa signal processing perspective / by: (書目-電子資源)

Fundamentals of geometry construction|bthe math behind the CAD by: (書目-電子資源)

Advanced manufacturing processesselected papers from the Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2019), September 10-13, 2019, Odessa, Ukraine / by: (書目-電子資源)

Innovative product design and intelligent manufacturing systemsselect proceedings of ICIPDIMS 2019 / by: (書目-電子資源)

Cloud computing for engineering applications by: (書目-電子資源)

Non-conventional unit operationssolving practical issues / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of NCAME 2019 / by: (書目-電子資源)

New approaches to gear design and production by: (書目-電子資源)

Advances in applied mechanical engineeringselect proceedings of ICAMER 2019 / by: (書目-電子資源)

Recent trends in mechanical engineeringselect proceedings of ICIME 2019 / by: (書目-電子資源)

Product developmentprinciples and tools for creating desirable and transferable designs / by: (書目-電子資源)

The new economy of the product life cycleinnovation and design in the digital era / by: (書目-電子資源)

ICT systems and sustainabilityproceedings of ICT4SD 2019.Volume 1 / by: (書目-電子資源)

Machine learning methods for reverse engineering of defective structured surfaces by: (書目-電子資源)

Pipeline spatial data modeling and pipeline WebGISdigital oil and gas pipeline: research and practice / by: (書目-電子資源)

Power and gas asset managementregulation, planning and operation of digital energy systems / by: (書目-電子資源)

Digital transformation of the design, construction and management processes of the built environment by: (書目-電子資源)

Advances in engineering design and simulationselect proceedings of NIRC 2018 / by: (書目-電子資源)

Faces of geometryfrom Agnesi to Mirzakhani / by: (書目-電子資源)

AI technology for underwater robots by: (書目-電子資源)

Technological paradigms and digital erasdata-driven visions for building design / by: (書目-電子資源)

Biomedical engineering and computational intelligenceproceedings of the World Thematic Conference : Biomedical Engineering and Computational Intelligence, BIOCOM 2018 / by: (書目-電子資源)

Proceedings of the 2019 DigitalFUTURESthe 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2019) / by: (書目-電子資源)

Design tools and methods in industrial engineeringproceedings of the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019, September 9-10, 2019, Modena, Italy / by: (書目-電子資源)

Advances in design, simulation and manufacturing IIproceedings of the 2nd International Conference on Design, Simulation, Manufacturing : the Innovation Exchange, DSMIE-2019, June 11-14, 2019, Lutsk, Ukraine / by: (書目-電子資源)

Advances in interdisciplinary practice in industrial designproceedings of the AHFE 2019 International Conference on Interdisciplinary Practice in Industrial Design, July 24-28, 2019, Washington D.C., USA / by: (書目-電子資源)

Value based and intelligent asset managementmastering the asset management transformation in industrial plants and infrastructures / by: (書目-電子資源)

Advances in manufacturing, production management and process controlproceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control, July 24-28, 2019, Washington D.C., USA / by: (書目-電子資源)

Advances in additive manufacturing, modeling systems and 3D prototypingproceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA / by: (書目-電子資源)

Information and communication technology for sustainable developmentproceedings of ICT4SD 2018 / by: (書目-電子資源)

Foundations of multi-paradigm modelling for cyber-physical systems by: (書目-電子資源)

Sustainable product developmenttools, methods and examples / by: (書目-電子資源)

Structural health monitoringa non-deterministic framework / by: (書目-電子資源)

Finite element analysis for civil engineering with DIANA software by: (書目-電子資源)

Application of coupled CFD-DEM simulation to separation process in combine harvester cleaning devices by: (書目-電子資源)

Manufacturing engineeringselect proceedings of CPIE 2019 / by: (書目-電子資源)

Advances in design, simulation and manufacturing IIIproceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (書目-電子資源)

Decision support systems for weed management by: (書目-電子資源)

HCI and design in the context of dementia by: (書目-電子資源)

Architectural intelligenceselected papers from the 1st International Conference on Computational Design and Robotic Fabrication (CDRF 2019) / by: (書目-電子資源)

Advances in production management systemsthe path to digital transformation and innovation of production management systems : IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 - September 3, 2020 : proceedings.Part I / by: (書目-電子資源)

Advances in production management systemstowards smart and digital manufacturing : IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 - September 3, 2020 : proceedings.Part II / by: (書目-電子資源)

Integrated design engineeringinterdisciplinary and holistic product development / by: (書目-電子資源)

Design thinkingcreativity, collaboration and culture / by: (書目-電子資源)

Natural language processing for electronic design automation by: (書目-電子資源)

Advances in production management systemsproduction management for the factory of the future : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019 : proceedings.Part I / by: (書目-電子資源)

Advances in production management systemstowards smart production management systems : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1-5, 2019 : proceedings.Part II / by: (書目-電子資源)

Computer-aided architectural design"Hello, culture": 18th International Conference, CAAD Futures 2019, Daejeon, Republic of Korea, June 26-28, 2019, Selected Papers / by: (書目-電子資源)

CIRP encyclopedia of production engineering by: (書目-電子資源)

Domain decomposition methods in science and engineering XXV by: (書目-電子資源)

ACMSM25proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials / by: (書目-電子資源)

Advances in ergonomics in designproceedings of the AHFE 2019 International Conference on Ergonomics in Design, July 24-28, 2019, Washington D.C., USA / by: (書目-電子資源)

Troubleshooting finite-element modeling with Abaquswith application in structural engineering analysis / by: (書目-電子資源)

Data augmented designembracing new data for sustainable urban planning and design / by: (書目-電子資源)

From building information modelling to mixed reality by: (書目-電子資源)

Seismic performance analysis of concrete gravity dams by: (書目-電子資源)

Trends in mechanical and biomedical designselect proceedings of ICMechD 2019 / by: (書目-電子資源)

Advances in VLSI and embedded systemsselect proceedings of AVES 2019 / by: (書目-電子資源)

Advances in production and industrial engineeringselect proceedings of ICETMIE 2019 / by: (書目-電子資源)

Advances in electromechanical technologiesselect proceedings of TEMT 2019 / by: (書目-電子資源)

3D printing architectureworkflows, applications, and trends / by: (書目-電子資源)

Industry 4.0 and advanced manufacturingproceedings of I-4AM 2019 / by: (書目-電子資源)

Digital conversion on the way to Industry 4.0selected papers from ISPR2020, September 24-26, 2020 Online - Turkey / by: (書目-電子資源)

Recent trends in mechanical engineeringselect proceedings of ICIME 2020 / by: (書目-電子資源)

Advances in manufacturing processesselect proceedings of RAM 2020 / by: (書目-電子資源)

Recent advances in mechanical engineeringselect proceedings of ITME 2019 / by: (書目-電子資源)

Core Blender developmentunderstanding the essential source code / by: (書目-電子資源)

Matrix discrete element analysis of geological and geotechnical engineering by: (書目-電子資源)

Dynamics in microwave chemistry by: (書目-電子資源)

Proceedings of the 2020 DigitalFUTURESthe 2nd International Conference on Computational Design and Robotic Fabrication (CDRF 2020) / by: (書目-電子資源)

Isogeometric analysis and applications 2018 by: (書目-電子資源)

Advances on mechanics, design engineering and manufacturing IIIproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2020, June 2-4, 2020 / by: (書目-電子資源)

High performance simulation for industrial paint shop applications by: (書目-電子資源)

Advances in design, simulation and manufacturing IVproceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.Volume 1,Manufacturing and materials engineering / by: (書目-電子資源)

Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020) by: (書目-電子資源)

Advances in engineering designselect proceedings of FLAME 2020 / by: (書目-電子資源)

Advanced manufacturing processes IIselected papers from the 2nd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2020), September 8-11, 2020, Odessa, Ukraine / by: (書目-電子資源)

Advances in manufacturing systemsselect proceedings of RAM 2020 / by: (書目-電子資源)

Collagea process in architectural design / by: (書目-電子資源)

Artificial intelligence in construction engineering and management by: (書目-電子資源)

A holistic approach to ship design.Volume 2,Application case studies by: (書目-電子資源)

Recent trends in engineering designselect proceedings of ICAST 2020 / by: (書目-電子資源)

FE computation on accuracy fabrication of ship and offshore structure based on processing mechanics by: (書目-電子資源)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part I / by: (書目-電子資源)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part II / by: (書目-電子資源)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part III / by: (書目-電子資源)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part IV / by: (書目-電子資源)

Advances in production management systemsartificial intelligence for sustainable and resilient production systems : IFIP WG 5.7 International Conference, APMS 2021, Nantes, France, September 5-9, 2021 : proceedings.Part V / by: (書目-電子資源)

Design engineering and science by: (書目-電子資源)

Advances in mechanical engineeringselect proceedings of ICAME 2020 / by: (書目-電子資源)

Post-industrial roboticsexploring informed architecture / by: (書目-電子資源)

Abstract pattern illustrations for textile printing by: (書目-電子資源)

Innovations in mechanical engineering by: (書目-電子資源)

Innovations in industrial engineering by: (書目-電子資源)

Recent trends in engineering designselect proceedings of ICCEMME 2021 / by: (書目-電子資源)

DigiTwinan approach for production process optimization in a built environment / by: (書目-電子資源)

Integrated computational life cycle engineering for traction batteries by: (書目-電子資源)

Virtual reality technology in mining machineryvirtual assembly, virtual planning and virtual monitoring / by: (書目-電子資源)

Outdoor thermal comfort in urban environmentassessments and applications in urban planning and design / by: (書目-電子資源)

Data-driven engineering design by: (書目-電子資源)

Towards sustainable customizationbridging smart products and manufacturing systems : proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021 / by: (書目-電子資源)

Digitizing production systemsselected papers from ISPR2021, October 07-09, 2021 Online, Turkey / by: (書目-電子資源)

Advanced manufacturing processes IIIselected papers from the 3rd Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2021), September 7-10, 2021, Odessa, Ukraine / by: (書目-電子資源)

Proceedings of the 2021 Digitalfuturesthe 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021) / by: (書目-電子資源)

Algorithm-driven truss topology optimization for additive manufacturing by: (書目-電子資源)

Recent advances in manufacturing modelling and optimizationselect proceedings of RAM 2021 / by: (書目-電子資源)

Advances in manufacturing III.Volume 1,Mechanical engineering: research and technology innovations, Industry 4.0 by: (書目-電子資源)

Rapid robotingrecent advances on 3D printers and robotics / by: (書目-電子資源)

Architectural graphics.Volume 3,Graphics for education and thought by: (書目-電子資源)

Applications of computational methods in manufacturing and product designselect proceedings of IPDIMS 2020 / by: (書目-電子資源)

Advances in design, simulation and manufacturing Vproceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland.Volume 1,Manufacturing and materials engineering / by: (書目-電子資源)

Design managementcreate, develop, and lead effective design teams / by: (書目-電子資源)

Computer-aided architectural designdesign imperatives : the future is now : 19th International Conference, CAAD Futures 2021, Los Angeles, CA, USA, July 16-18, 2021 : selected papers / by: (書目-電子資源)

Architecting a knowledge-based platform for design engineering 4.0 by: (書目-電子資源)

Digital twins in manufacturingvirtual and physical twins for advanced manufacturing / by: (書目-電子資源)

VLSI physical design: from graph partitioning to timing closure by: (書目-電子資源)

Integrated CAD by optimizationarchitecture, engineering, construction, urban development and management / by: (書目-電子資源)

3D physical and virtual models in fetal medicineapplications and procedures / by: (書目-電子資源)

Collaborative knowledge management through product lifecyclea computational perspective / by: (書目-電子資源)

Flexible automation and intelligent manufacturingthe human-data-technology nexus : proceedings of FAIM 2022, June 19-23, 2022, Detroit, Michigan, USA.Volume 2 / by: (書目-電子資源)

Patterns of interactioncomputational design across scales / by: (書目-電子資源)

Towards Industry 5.0selected papers from ISPR2022, October 6-8, 2022, Antalya / by: (書目-電子資源)

Computer aided engineering of batteries by: (書目-電子資源)

Hybrid intelligenceproceedings of the 4th International Conference on Computational Design and Robotic Fabrication (CDRF 2022) / by: (書目-電子資源)

Targeted cancer therapy in biomedical engineering by: (書目-電子資源)

Advances on mechanics, design engineering and manufacturing IVproceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, JCM 2022, June 1-3, 2022, Ischia, Italy / by: (書目-電子資源)

Flexible automation and intelligent manufacturingthe human-data-technology nexus : proceedings of FAIM 2022, June 19-23, 2022, Detroit, Michigan, USA.Volume 1 / by: (書目-電子資源)

Recent developments in mechanics and designselect proceedings of INCOME 2021 / by: (書目-電子資源)

Advances in VLSI and embedded systemsselect proceedings of AVES 2021 / by: (書目-電子資源)

Excel-VBAfrom solving mathematical puzzles to analysing complex engineering problems / by: (書目-電子資源)

Optimization methods for product and system design by: (書目-電子資源)

Intelligent manufacturing systems in industry 4.0select proceedings of IPDIMS 2022 / by: (書目-電子資源)

Proceedings of the 3rd annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).Volume 1,Advanced materials and manufacturing technologies by: (書目-電子資源)

Prototyping user experience in eXtended reality by: (書目-電子資源)

Advances in engineering designselect proceedings of FLAME 2022 / by: (書目-電子資源)

Computer-aided architectural design, INTERCONNECTIONS : co-computing beyond boundaries20th International Conference, CAAD Futures 2023, Delft, The Netherlands, July 5-7, 2023 : selected papers / by: (書目-電子資源)

Augmented realitywhere we will all live / by: (書目-電子資源)

Formal methods in architectureproceedings of the 6th International Symposium on Formal Methods in Architecture (6FMA), A Coruna 2022 / by: (書目-電子資源)

Additive manufacturing with metalsdesign, processes, materials, quality assurance, and applications / by: (書目-電子資源)

Digital twin technologies in transportation infrastructure management by: (書目-電子資源)

Proceedings of the 2nd International Conference on Innovative Materials, Manufacturing, and Advanced TechnologiesIMMAT'2022 / by: (書目-電子資源)

Advanced digital system designa practical guide to Verilog Based FPGA and ASIC implementation / by: (書目-電子資源)

Architecture and design for industry 4.0theory and practice / by: (書目-電子資源)

Advances in additive manufacturingmaterials, processes and applications : selected contributions to the 2nd Advances in Additive Manufacturing Conference (AIAM' 2023), May 18-20, 2023, Hammamet, Tunisia / by: (書目-電子資源)

Proceedings of the 15th International Conference on Axiomatic Design 2023 by: (書目-電子資源)

Phygital intelligenceproceedings of the 5th International Conference on Computational Design and Robotic Fabrication (CDRF 2023) / by: (書目-電子資源)

FPGA EDAdesign principles and implementation / by: (書目-電子資源)

Multimodality in architecturecollaboration, technology and education / by: (書目-電子資源)

CIRP novel topics in production engineering.Volume 1 by: (書目-電子資源)

Industrial engineering in the industry 4.0 eraselected papers from ISPR2023, October 5-7, 2023, Antalya / by: (書目-電子資源)

Geometric tolerancing standard to machine designa design-for-fit approach / by: (書目-電子資源)

Advances in manufacturing IV.Volume 1,Mechanical engineering: digitalization, sustainability and industry applications by: (書目-電子資源)

Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).Volume 2,Materials applications, machining, and renewable energy by: (書目-電子資源)

Advances in manufacturing IV.Volume 2,Production engineering : digitalization, sustainability and industry applications by: (書目-電子資源)

Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).Volume 3,Sustainable approaches in machine design, life cycle engineering, and energy management for manufacturing processes by: (書目-電子資源)

Product lifecycle management.(Volume 7),PLM and Digital Twins by: (書目-電子資源)

Novel technology and whole-process management in prefabricated buildingconference proceedings of the 5th International Prefabricated Building Seminar on Frontier Technology and Talent Training / by: (書目-電子資源)

Proceedings of the 26th Australasian Conference on the Mechanics of Structures and MaterialsACMSM26, 3-6 December 2023, Auckland, New Zealand / by: (書目-電子資源)

3D printed science projects.ideas for your classroom, science fair, or home /Volume 1 by: (書目-電子資源)

Detection of karst voids at deep pile foundation by: (書目-電子資源)

Proceedings of 2024 International Conference on Medical Imaging and Computer-Aided Diagnosis (MICAD 2024)medical imaging and computer-aided diagnosis / by: (書目-電子資源)

Symbiotic intelligenceproceedings of the 6th International Conference on Computational Design and Robotic Fabrication (CDRF 2024) / by: (書目-電子資源)

Advances in the integration of technology and the built environmentselect proceeding of Architecture Across Boundaries 2024 / by: (書目-電子資源)

Engineering mathematics with MATLAB® and Simulink® by: (書目-電子資源)

Computer aided engineering design and manufacturinga fourth Industrial Revolution perspective / by: (書目-電子資源)

Hip prosthesisCAD modeling, finite element analysis (FEA) and compressive load testing / by: (書目-電子資源)

Chief design officers at workinsights and strategies from CDOs on the frontlines of innovation / by: (書目-電子資源)

Intelligent systems in production engineering and maintenance IV.Volume 1,Mechanical engineering by: (書目-電子資源)

Architectural researchan academic textbook for students of architecture / by: (書目-電子資源)

The new horizons of oblique axonometrythe geometry of the drawing geometric experimentation / by: (書目-電子資源)

Formal methods in architectureproceedings of the 7th International Symposium on Formal Methods in Architecture (7FMA), Porto 2024 / by: (書目-電子資源)

Optimization methods in VLSI designa machine-generated literature overview / by: (書目-電子資源)

Shape computationfifty years, 1972-2022 / by: (書目-電子資源)

Fundamentals of manufacturing engineering using digital visualization by: (書目-電子資源)

Sustainable green conversion.selected papers from ISPR2024, October 10-12, 2024 Budva, Montenegro /Volume 1 by: (書目-電子資源)

Sustainable green conversion.selected papers from ISPR2024, October 10-12, 2024 Budva, Montenegro /Volume 2 by: (書目-電子資源)

Sustainable manufacturing innovations : focus on new energy vehicles, production robots, and software-defined manufacturingproceedings of ICSM 2024, Shanghai, China, October 30-November 1, 2024 / by: (書目-電子資源)

Smart innovations in energy and mechanical systemsproceedings of SIEMS-2025 / by: (書目-電子資源)

Design thinkingcreativity, collaboration and culture / by: (書目-電子資源)